Hostname: page-component-848d4c4894-p2v8j Total loading time: 0.001 Render date: 2024-06-02T14:01:20.672Z Has data issue: false hasContentIssue false

The Significance of Particle Size in Sand Erosion of Small Gas Turbines

Published online by Cambridge University Press:  04 July 2016

Wendy Sage
Affiliation:
NGTE, Pyestock
G. P. Tilly
Affiliation:
NGTE, Pyestock

Extract

Operation of vehicles over dusty terrains and unprepared airstrips has highlighted the erosion problems incurred by ingestion of dusty air. Hibbert summarised the experience from British helicopter trials up to that date and drew attention to some of the factors that influenced the extent of erosion damage and to methods of minimising it. He cited a trial during 1963 in which a twin-engine Wessex Mk 2 helicopter having one intake protected by felt filters was tested in North Africa. Some idea of the severity of the problem may be gained from the fact that the unprotected engine surged after 3h 40 min while the other was found to have lost half its surge margin. However, operation can usually be arranged so that time spent in the dusty environment is minimised and service lives under desert conditions may be typically around 100h. In attempts to improve lives to a more acceptable level, different types of filtration have been investigated and the mechanism of erosion studied in some detail. This note describes some laboratory experiments to determine the influence of particle size on the erosion and attempts to relate this to filtration and engine life.

Type
Technical Notes
Copyright
Copyright © Royal Aeronautical Society 1969 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Hibbert, W. A. Helicopter Trials Over Sand and Sea. JRAeS, Vol 69, No 659, November 1965.Google Scholar
2. Goodwin, J. E., Sage, Wendy and Tilly, G. P. A Study of Erosion by Solid Particles. (Unpublished.) Google Scholar
3. Sheldon, G. L. and Finnie, I. The Mechanism of Material Removal in the Erosive Cutting of Brittle Materials. J of Eng for Industry, November 1966.Google Scholar
4. Sheldon, G. L. and Finnie, I. On the Ductile Behaviour Nominally Brittle Materials During Erosive Cutting. J of Eng for Industry, November 1966.Google Scholar
5. Montgomery, J. E. and JrClark, J. M., Dust Erosion Parameters for a Gas Turbine. SAE Summer Meeting Paper 538A, June 1962.Google Scholar
6. Skinner, R. N. General Electric, March 1962. (Unpublished.) Google Scholar
7. Bianchini, G. V. and Koschman, R. B. T 63 Engine Sand and Dust Tolerance. Development and Field Experience. Sixth Conference on Environmental Effects on Aircraft and Propulsion Systems. Princeton NJ, 1966.Google Scholar