Hostname: page-component-848d4c4894-wzw2p Total loading time: 0 Render date: 2024-05-23T19:41:48.326Z Has data issue: false hasContentIssue false
  • English
  • Français

Particle Size and Shape Effects in Materials Science: Examples from Polymer and Paper Systems

Published online by Cambridge University Press:  09 July 2018

J. M. Adams
J. M. Adams*
Affiliation:
ECC International, John Keay House, St Austell, Cornwall PL25 4DJ, UK
Get access Rights & Permissions [Opens in a new window]

Abstract

Large quantities of clay minerals (and other micron-sized mineral powders) are used widely in materials science. Mineral fillers are major components, for example, of paints, rubber, plastics and paper and board. While the original object of such incorporation was to reduce costs, performance is now being “engineered” by design or choice of the relevant mineral particles. This paper concentrates on the use of mineral powders in polymer and paper science. In both application areas, the size and shape of the mineral particles can affect mechanical properties such as stiffness and tensile and impact strength. However, other characteristics are also modified. For example, the drainage rate in paper formation and the rheology of a polymer melt, properties which are critically important to the rate of processing of the relevant materials, can be greatly affected. Finally, the size and shape of the mineral particles also affect appearance, i.e. the smoothness, uniformity, optical properties etc. Mechanical and rheological data are presented for mineral-filled polypropylene, as are mechanical and optical data for filled and coated paper.

Type
Research Article
Information
Clay Minerals , Volume 28 , Issue 4 , December 1993 , pp. 509 - 530
Copyright
Copyright © The Mineralogical Society of Great Britain and Ireland 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Adams, J.M. & Walters, K.W. (1993) Effect of filler morphology and surface chemistry on the rheological properties of filled polypropylenes. Makromol. Chem. Macromol. Sym. 68, 227–244.CrossRefGoogle Scholar
Al-Hadithi, T.S., Barnes, H.A. & Walters, K. (1992) The relationship between the linear (oscillatory) and nonlinear (steady-state) flow properties of a series of polymer and colloidal systems. Colloid Polym. Sci. 270, 40–46.Google Scholar
Beazley, K.M. (1991) Mineral fillers in paper. Part I. Basic physical and chemical properties; production technology. Paper Conservator 15, 17–27.Google Scholar
Beazley, K.M., Dennison, S.R. & Taylor, J.H. (1979) The influence of mineral fillers on paper strength: its mechanism and practical means of modification. ESPRI European meeting, Brussels. Vol. 11, 217–238.Google Scholar
Bown, R. (1985a) The use of filler in newsprint: a review of the technical aspects. PTS Paper Making Sym., Munich. Google Scholar
Bown, R. (1985b) Fillers for uncoated groundwood papers. Proc. PPI Conference on Woodcontaining Papers, New York. Google Scholar
Bown, R., Gane, P.A.C. & Hooper, J.J. (1987) Coating thickness analysis: an evaluation by coating profilometry of interactions between coating colour and basepaper. 13th PTS Coating Sym., Munich, Publ. PTS Munich.Google Scholar
Cook, J. & Gordon, J.E. (1984) A mechanism for the control of crack propagation in all-brittle systems. Proc. Roy. Soc. A282, 508–520.Google Scholar
Farber, J.N. & Farris, R.J. (1987) Model for prediction of the elastic response of reinforced materials over wide ranges of concentration. J. Appl. Polym. Sci. 34, 2093–2104.Google Scholar
Gate, L.G. & Leaity, K. (1991) New aspects on the gloss of coated paper. Proc. Tappi Coating Conference, Montreal, Publ. Tappi Press, Atlanta.Google Scholar
Green, D.G., Nicholson, P.S. & Embury, J.D. (1979a) Fracture of a brittle particulate composite. Part 1. Experimental aspects. J. Mater. Sci. 14, 1413–1420.CrossRefGoogle Scholar
Green, D.G., Nicholson, P.S. & Embury, J.D. (1979b) Fracture of a brittle particulate composite. Part 2. Theoretical aspects. J. Mater. Sci. 14, 1657–1661.Google Scholar
Griffith, A.A. (1920) The phenomena of rupture and flow in solids. Phil. Trans. Roy. Soc. A221, 163–198. Kinloch, A.J., Maxwell, D.L. & Young, R.J. (1985) The fracture of hybrid-particulate composites. J. Mater. Sci. 20, 4169–4184.Google Scholar
McGenity, P.M., Gane, P.A.C., JJusband, J.C. & Engley, M.S. (1992a) Effect of interactions between coating colour components on rheology, water retention and runnability. Proc. Tappi Coating Conference, Orlando. Publ. Tappi Press, Atlanta.Google Scholar
McGenity, P.M., Hooper, J.J., Paynter, C.D., Riley, A.M., Nutbeem, C., Elton, N.J. & Adams, J.M. (1992b) Nucleation and crystallisation of polypropylene by mineral fillers: relationship to impact strength. Polymer 33, 5215–5224.Google Scholar
Padawar, G.E. & Beecher, N. (1970) On the strength and stiffness of planar reinforced plastic resins. Polym. Eng. Sci. 10, 185–192.Google Scholar
Page, D. (1969) A theory for the tensile strength of paper. Tappi J. 52, 674–681.Google Scholar
Radosta, J.A. (1976) Impact and flexural modulus behaviour of calcium carbonate and talc filled polyolefins. SPE Technical Papers 22, 465-171.Google Scholar
Riley, A.M., Paynter, C.D., McGenity, P.M. & Adams, J.M. (1990) Factors affecting the impact properties of mineral filled polypropylene. Plast. Rubber Proc. Applic. 14, 85–93.Google Scholar
Stanford, J.L. & Bentley, S.R. (1989) The tensile and impact properties of polypropylene composites containing chalk (calcium carbonate) and wollastonite (calcium meta silicate) fillers. Filpas ‘89—The Fillers Conf. Publ. PRI, London, Paper 18.Google Scholar
Svehova, V. & Poloucek, E. (1987) About the influence of filler particle size on toughness of filled polypropylene. Angew. Makromol. Chemie 153, 197–200.CrossRefGoogle Scholar
Vollenberg, P.H.T. (1987) The mechanical behaviour of particle filled thermoplastics. PhD thesis, Technische Univ. Eindhoven, Netherlands.Google Scholar
Walters, K (1975) Rheometry. Chapman & Hall, London.Google Scholar