The susceptibility of rocks to weathering into soils and the subsequent weathering of the solum itself are important both with respect to sediment formation and to agriculture. Residual soils developed on some rock types representative of the major soil associations of NE Scotland have consequently been examined in detail in an attempt to assess the weatherability of both the rocks and the derived soils. Methods based on chemical composition have been supplemented by potential methods related to the production of poorly-ordered aluminosilicate material and to depolymerisation of the silicate framework in the minerals present. In general, there is, as would be expected on the basis of increasing energy supply and increasing entropy, an increase in the amount of monomeric silica towards the surface and this appears to be closely related to the amount and nature of the poorly-ordered aluminosilicate. The results suggest that only the purely chemical methods can currently enable a reasonable assessment to be made of the susceptibility of a rock or soil to further weathering.

The Tibetan–Tethys zone of the Zanskar Himalaya shows a complete Mesozoic shelf carbonate sequence overlying metamorphic basement of the Central crystalline complex and Palaeozoic sedimentary rocks. Continental rifting in the Permian produced the alkaline and basaltic Panjal volcanic rocks and by Triassic time a small ocean basin was developed in the Indus-Tsangpo zone. Stable sedimentation continued until the Middle-Late Cretaceous when a thick sequence of tholeiitic to andesitic island arc lavas (Dras arc) were erupted in the basin above a N-dipping subduction zone. The Spontang ophiolite was emplaced southwards onto the Zanskar shelf edge during latest Cretaceous or earliest Tertiary times.

Following emplacement of the Spontang ophiolite, deep-sea sedimentation ended abruptly with initial collision between the Indian plate and the Dras island arc. Emplacement of the massive Ladakh (Trans-Himalayan) batholith along the southern margin of Tibet in late Cretaceous-Eocene time occurred by crustal melting as a result of northward subduction of Mesozoic oceanic crust along the Indus subduction zone. Southward-directed thrusting in both Zanskar and Indus zones accompanied ocean closure during the late Cretaceous–Eocene. Late Tertiary compression caused intense folding, overturning and a phase of northward-directed thrusting along the Indus suture zone and the northern margin of the Tibetan–Tethys zone, resulting in a large amount of crustal shortening.

In the southern part of the Archaean craton of South India, an approximately 3.4–2.9 b.y. old migmatite–gneiss terrane (Peninsular gneiss complex) has been subjected to granulite facies metamorphism about 2.6 b.y. ago. During this event, the extensive charnockite-khondalite zone of southern India developed. A younger metamorphism (Proterozoic?) led to retrogression of the charnockites and khondalites, mainly under the conditions of the amphibolite facies.

The physical conditions of metamorphism have been evaluated by applying methods of geothermobarometry to the widespread charnockitic assemblages with garnet, orthopyroxene, clinopyroxene, plagioclase, and quartz. The interpretation of the P–T estimates includes a critical discussion of potential error sources, e.g. errors of the analytical data and the calibrations of the models, and takes into account the complex metamorphic history of the rocks and the kinetics of the mineral equilibria.

P-T estimates were obtained for seven subareas from the rim compositions of the coexisting minerals: Shevaroy Hills 680±55°C—7·4±1 kb; Kollaimalai area 680±40°C—8·6± 1 kb; Nilgiri Hills 680±90°C—6·6±0.8kb (upland massif) and 705±60°C—9·3±0.8 kb (northern margin); Bhavani Sagar area 650±50°C—7·2± 1 kb; Sargur-Mysore area 690±60°C—7·6 kb; Bangalore-Kunigal-Satnur area 760±50°C—6 kb. Except for the last subarea, the P-T model data reflect the conditions of a late annealing stage probably related to the retrogressive metamorphism. Conditions near the peak of granulite facies metamorphism (730–800°C—6·5–9·5 kb) are recorded by the core compositions of the minerals. Although a rather uniform cooling history of the main part of the charnockite-khondalite terrane is suggested from the temperature data, differential uplift of smaller blocks is indicated by the regional variation of the pressure data.

The stratigraphy of red bed successions in the Clew Bay area of County Mayo (Ireland) is described, and new palynological evidence for the age of some of the rocks is presented. The Old Red Sandstone in the Clew Bay area comprises several lithostratigraphic units. The Louisburgh succession is interpreted as part of a Silurian marginal marine sequence. Devonian strata are represented by the Islandeady Group which has yielded plant spores which suggest that these rocks should be assigned to the Lower Devonian (Siegenian to Emsian) and the Beltra Group which contains Middle Devonian (Eifelian) spores. These Lower and Middle Devonian strata are probably separated by an unconformity, and are overlain with clear unconformity by the highest unit, the Maam Formation, which is Dinantian (Carboniferous) in age. The Clew Bay Old Red Sandstone succession, therefore, shows important differences from that of the Midland Valley of Scotland, with which it has previously been compared.

Approximately 700 samples from five slate, three marble and five quartzite units have been analysed for 26 elements to determine the use of geochemistry in stratigraphic correlation. Statistical treatment of the data has established that for all the slates and marbles, and certain of the quartzites, geochemistry is a viable method of distinguishing units of similar lithology. The most useful elements for distinguishing the four main slate units are P, Cr. Zn, Cu and, to a lesser extent, Rb, Sr, Y, Nb, Ba, La and Ce. Sr may indicate climatic changes or variable organic activity. The three marble units were considered as three limestone and three dolostone types. Dolostones are distinguished by high insoluble residue contents and the elements that distinguish between the dolostones are heavily influenced by these. Limestones, however, have very large differences in Sr. SiO2, Al2O3, K2O, Cr, Mn, Cu, Rb, Sr, Y and Zr have been used in discrimint function analysis. These parameters are strongly controlled by the insoluble residue with Al2O3, K2O, Cr and Rb being correlated with shaley impurities and SiO2, TiO2 and Zr with sandy impurities. Sr, Pb, Y and Zn, and to a lesser extent S and Mn, appear to be associated with the carbonate fraction.

The quartzites were found to be of three major types: (1) a very variable deltaic deposit (Appin Quartzite Formation), (2) marine bodies of immature quartz sands (Glen Coe and Eilde Quartzite formations) and (3) highly mature quartz sands (Binnein Quartzite Formation and northerly outcrops of the Glen Coe Quartzite Formation). It is possible to distinguish these three types on the basis of some trace elements (Zn, Rb, Sr, Y, Ba, La, Ce) but it is not feasible to distinguish between the Glen Coe and Eilde quartzites purely on geochemistry. The Eilde Flags, an immature estuarine sandstone, has a geochemistry intermediate between that of the quartzites and the pelites, although with higher CaO, Zr and Ba than either.