Hostname: page-component-848d4c4894-ttngx Total loading time: 0 Render date: 2024-06-12T12:47:22.342Z Has data issue: false hasContentIssue false
  • English
  • Français

Development of Hybrid Structures of Silver Nanowire Electrodes for the Electrodynamic Screen (EDS) Films to Mitigate Energy Yield Loss Incurred by Solar Collectors Due to Soiling

Published online by Cambridge University Press:  15 February 2019

Annie Rabi Bernard ,
Ryan Eriksen  and
Malay Mazumder
Annie Rabi Bernard*
Affiliation:
Boston University, Department of Electrical and Computer Engineering, Boston MA
Ryan Eriksen
Affiliation:
Boston University, Department of Electrical and Computer Engineering, Boston MA
Malay Mazumder
Affiliation:
Boston University, Department of Electrical and Computer Engineering, Boston MA
*
†(Email: annieber@bu.edu)
Get access

Abstract

This study aims at establishing environmentally stable and viable silver nanowire (AgNW) electrodes of an Electrodynamic Screen (EDS) film, by the inclusion of one or more protective layers of zinc oxide (ZnO) produced in lab by combining tetrahydrofuran (THF) and diethylzinc (DEZ). The electrodes can be realized as 1) stacked structure where the AgNW electrode has a layer of ZnO on top for protection or 2) sandwiched structure where the AgNW electrode is covered by ZnO layers, protecting it from the top and bottom. Experiments are done to test the effect of accelerated exposure to ultraviolet light, high temperature and passage of high voltage on the AgNW samples and are compared with the results obtained from the AgNW samples that have the ZnO protective layer which have also been subjected to the aforementioned test conditions. A complete water immersion test is performed in order to ensure functionality and efficiency of the ZnO/AgNW samples that are to be patterned as electrodes of the EDS film. This will demonstrate viability of the structure in the case of rain.

Keywords

photovoltaicAgZnefficiencycorrosion
Type
Articles
Information
MRS Advances , Volume 4 , Issue 5-6: Nanomaterials , 2019 , pp. 343 - 350
Copyright
Copyright © Materials Research Society 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

References:

Bellet, D., Lagrange, M., Sannicolo, T., Aghazadehchors, S., Nguyen, V.H., Langley, D.P., Muñoz-Rojas, D., Jiménez, C., Bréchet, Y., Nguyen, N.D., Materials (Basel) 10 (2017).CrossRefGoogle Scholar
Sannicolo, T., Lagrange, M., Cabos, A., Celle, C., Simonato, J.-P., Bellet, D., Small 12 (2016) 6052–6075.CrossRefGoogle Scholar
Choo, D.C., Kim, T.W., Sci Rep 7 (2017).Google Scholar
Liu, G.-S., Xu, Y., Kong, Y., Wang, L., Wang, J., Xie, X., Luo, Y., Yang, B.-R., ACS Appl. Mater. Interfaces 10 (2018) 37699–37708.CrossRefGoogle ScholarPubMed
Tang, L., Zhang, J., Dong, L., Pan, Y., Yang, C., Li, M., Ruan, Y., Ma, Jianhua, Lu, H., Nanotechnology 29 (2018) 375601.CrossRefGoogle Scholar
Wang, S., Tian, Y., Hang, C., Wang, C., Scientific Reports 8 (2018) 5260.CrossRefGoogle Scholar
Appels, R., Lefevre, B., Herteleer, B., Goverde, H., Beerten, A., Paesen, R., De Medts, K., Driesen, J., Poortmans, J., Solar Energy 96 (2013) 283–291.CrossRefGoogle Scholar
Mazumder, M.K., Horenstein, M.N., Joglekar, N.R., Sayyah, A., Stark, J.W., Bernard, A.A.R., Garner, S.M., Yellowhair, J.E., Lin, H.Y., Eriksen, R.S., Griffin, A.C., Gao, Y., Centra, R.L., Lloyd, A.H., IEEE Journal of Photovoltaics 7 (2017) 1342–1353.CrossRefGoogle Scholar
Bernard, A.R., Eriksen, R., Horenstein, M.N., Mazumder, M.K., (2018).Google Scholar
Alami, A.H., Rajab, B., Aokal, K., Energy 139 (2017) 1231–1236.CrossRefGoogle Scholar
You, S., Park, Y.S., Choi, H.W., Kim, K.H., J Nanosci Nanotechnol 15 (2015) 8656–8661.CrossRefGoogle Scholar
Alami, A.H., Rajab, B., Aokal, K., Energy 139 (2017) 1231–1236.CrossRefGoogle Scholar