Hostname: page-component-848d4c4894-pftt2 Total loading time: 0 Render date: 2024-06-01T23:33:03.627Z Has data issue: false hasContentIssue false

Technology transfer challenges in the manufacturing of a-Si tandem solar cells

Published online by Cambridge University Press:  17 March 2011

D. E. Carlson
Affiliation:
BP Solar, Toano, VA 23168
G. Ganguly
Affiliation:
BP Solar, Toano, VA 23168
G. Lin
Affiliation:
BP Solar, Toano, VA 23168
M. Gleaton
Affiliation:
BP Solar, Toano, VA 23168
M. Bennett
Affiliation:
BP Solar, Toano, VA 23168
R. R. Arya
Affiliation:
BP Solar, Toano, VA 23168
Get access

Abstract

BP Solar started commercial production of amorphous silicon tandem solar cells in Toano, Virginia in 1997. The scale-up process has involved overcoming technology challenges in several areas. It was necessary to develop high speed, multiple-beam laser scribing systems that could pattern photovoltaic modules over an area of 0.8 square meters with close dimensional tolerances. In addition, the deposition rate of amorphous silicon was doubled while production was being ramped up, and the deposition system was modified to meet capacity requirements. The utilization of the germane feedstock gas was increased by about 25% in order to reduce material costs. In addition, the dimensional tolerances of the deposition system geometry were determined and controlled in order to assure uniform deposition of the amorphous silicon alloys. Effects of contaminants (such as pump oils and residual dopants) on device performance were quantified. Sources of debris that could cause shunts and shorts in the devices were identified and minimized. Current research efforts are focused on further increases in the amorphous silicon deposition rate, improvements in device performance and the development of in-situ diagnostic tools to monitor and control the manufacturing process.

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Carlson, D. E. and Wronski, C. R., Appl. Phys. Lett. 28, 671 (1976).Google Scholar
2. Carlson, D. E., U. S. Patent No. 4,064,521 (1977).Google Scholar
3. Carlson, D. E. and Wagner, S., Amorphous Silicon Photovoltaic Systems, Renewable Energy – Sources for Fuels and Electricity, ed. Johansson, T. B., Kelly, H., Reddy, A. K. N. and Williams, R. H. (Island Press, 1992) pp. 403435.Google Scholar
4. Carlson, D. E., Arya, R. R., Bennett, M., Chen, L.-F., Jansen, K., Li, Y. -M., Newton, J., Rajan, K., Romero, R., Talenti, D., Twesme, E., Willing, F. and Yang, L., Proc. 25th IEEE Photovoltaic Specialists Conf., pp. 10231028 (1996).Google Scholar
5. Nostrand, G. E. and Hanak, J., U.S. Patent No. 4,166,918 (1979).Google Scholar
6. Wronski, C. R. and Carlson, D. E., Amorphous Silicon Solar Cells, Photoconversion of Solar Energy, Vol. 3, Clean Energy from Photovoltaics, Imperial College Press (2001).Google Scholar
7. Arya, R. R., Bennett, M., Lin, G., Willing, F., Newton, J., Ganguly, G. and Liu, S., Proc. 28th IEEE Photovoltaic Specialists Conf., to be published (2000).Google Scholar
8. Carlson, D. E., Gleaton, M. and Ganguly, G., Proc. 16th European Photovoltaic Solar Energy Conference, Glasgow, UK, 1 – 5 May 2000, to be published (2000).Google Scholar
9. Guha, S., Yang, J., Banerjee, A., Hoffman, K. and Call, J., AIP Conf. Proc. 462, pp. 8893 (1999).Google Scholar
10. Staebler, D. L. and Wronski, C. R., Appl. Phys. Lett. 31, 292 (1977).Google Scholar
11. Yamamoto, K., Yoshimi, M., Suzuki, T., Tawada, Y., Okamoto, Y., and Nakajima, A., 2nd World Conf. on PV Solar Energy Conversion, pp. 12841289 (1998).Google Scholar
12. Yamamoto, K., Yoshimi, M., Suzuki, T., Nakata, T., Sawada, T., Nakajimi, A. and Hayashi, K., Proc. 28th IEEE Photovoltaic Specialists Conf., to be published (2000).Google Scholar