Hostname: page-component-848d4c4894-x24gv Total loading time: 0 Render date: 2024-06-12T12:04:56.539Z Has data issue: false hasContentIssue false
  • English
  • Français

Proposal for Load Adaptive Design of Microlattice Structures Suitable for PBF-LB/M Manufacturing

Published online by Cambridge University Press:  26 May 2022

A. Seidler ,
S. Holtzhausen ,
H. Korn ,
P. Koch ,
K. Paetzold  and
B. Müller
A. Seidler*
Affiliation:
Technische Universität Dresden, Germany
S. Holtzhausen
Affiliation:
Technische Universität Dresden, Germany
H. Korn
Affiliation:
Fraunhofer IWU Dresden, Germany
P. Koch
Affiliation:
Technische Universität Dresden, Germany
K. Paetzold
Affiliation:
Technische Universität Dresden, Germany
B. Müller
Affiliation:
Fraunhofer IWU Dresden, Germany
*
alexander.seidler@tu-dresden.de

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

In this paper, a proposal for a new method to design load-adaptive microlattice structures for PBF-LB/M manufacturing is presented. For this purpose, a method was developed to stiffen microlattice structures in particular by using self-similar sub-cells to ensure their manufacturability. The quality of the stiffness increase was investigated and verified by finite element simulations. Subsequently, the simulation results were critically discussed with respect to their potential for future design processes for architected materials.

Keywords

architected materials3D printingadditive manufacturinglattice sctructuresdesign methods
Type
Article
Information
Proceedings of the Design Society , Volume 2: DESIGN2022 , May 2022 , pp. 1461 - 1470
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2022.

References

Al Nashar, M. and Sutradhar, A. (2021), “Design of Hierarchical Architected Lattices for Enhanced Energy Absorption”, Materials, Vol. 14 No. 18. 10.3390/ma14185384Google ScholarPubMed
Bai, L., Xu, Y., Chen, X., Xin, L., Zhang, J., Li, K. and Sun, Y. (2021), “Improved mechanical properties and energy absorption of Ti6Al4V laser powder bed fusion lattice structures using curving lattice struts”, Materials & Design, Vol. 211, p. 110140. 10.1016/j.matdes.2021.110140CrossRefGoogle Scholar
Bai, L., Yi, C., Chen, X., Sun, Y. and Zhang, J. (2019), “Effective Design of the Graded Strut of BCC Lattice Structure for Improving Mechanical Properties”, Materials, Vol. 12 No. 13. 10.3390/ma12132192CrossRefGoogle ScholarPubMed
Feng, Q., Tang, Q., Liu, Z., Liu, Y. and Setchi, R. (2018), “An investigation of the mechanical properties of metallic lattice structures fabricated using selective laser melting”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 232 No. 10, pp. 1719–1730. 10.1177/0954405416668924Google Scholar
Gümrük, R. and Mines, R. (2013), “Compressive behaviour of stainless steel micro-lattice structures”, International Journal of Mechanical Sciences, Vol. 68, pp. 125–139. 10.1016/j.ijmecsci.2013.01.006Google Scholar
Kadic, M., Milton, G.W., van Hecke, M. and Wegener, M. (2019), “3D metamaterials”, Nature Reviews Physics, Vol. 1 No. 3, pp. 198–210. 10.1038/s42254-018-0018-yCrossRefGoogle Scholar
Koch, P., Korn, H., Kordass, R., Holtzhausen, S., Schoene, C., Mueller, B. and Stelzer, R. (2018), “A CAD-based Workflow and Mechanical Characterization for Additive Manufacturing of Tailored Lattice Structures”, Solid Freeform Fabrication Symposium, Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, Texas, USA, August 13–15, 2018, the University of Texas at Austin, pp. 782–790. 10.26153/tsw/17077Google Scholar
Korn, H., Koch, P., Kordaß, R., Holtzhausen, S., Schöne, C., Müller, B. and Stelzer, R. (Eds.) (2018a), “Adapted Scan Strategy and Slicing Tool for Improvement of Strut Precision in Lattice Structures”, Summer Topical Meeting, Advancing Precision in Additive Manufacturing“, Berkeley, California, USA, July 22–25, 2018, Taylor, J.S., American Society for Precision Engineering -ASPE-, pp.50–54.Google Scholar
Korn, H., Koch, P., Kordaß, R., Schöne, C., Müller, B., Holtzhausen, S. and Stelzer, R. (2018b), “Influences of scan strategy and exposure parameters on diameter and surface quality of struts in lattice structures”, in Fraunhofer Direct Digital Manufacturing Conference (DDMC), Berlin, Germany, March 14–15, 2018, Fraunhofer Verlag, Stuttgart.Google Scholar
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O. and Brandt, M. (2019), “SLM lattice structures: Properties, performance, applications and challenges”, Materials & Design, Vol. 183, p. 108137. 10.1016/j.matdes.2019.108137CrossRefGoogle Scholar
Meza, L.R., Zelhofer, A.J., Clarke, N., Mateos, A.J., Kochmann, D.M. and Greer, J.R. (2015), “Resilient 3D hierarchical architected metamaterials”, Proceedings of the National Academy of Sciences of the United States of America, Vol. 112 No. 37, pp. 11502–11507. 10.1073/pnas.1509120112Google ScholarPubMed
Mines, R. (2019), Metallic Microlattice Structures, Springer International Publishing, Cham.Google Scholar
Pan, C., Han, Y. and Lu, J. (2020), “Design and Optimization of Lattice Structures: A Review”, Applied Sciences, Vol. 10 No. 18, p. 6374. 10.3390/app10186374CrossRefGoogle Scholar
Rehme, O. and Emmelmann, C. (2006), “Rapid manufacturing of lattice structures with selective laser melting”, in Bachmann, F.G., Hoving, W., Lu, Y. and Washio, K. (Eds.), Lasers and Applications in Science and Engineering, SPIE, 61070K. 10.1117/12.645848Google Scholar
Sha, Y., Jiani, L., Haoyu, C., Ritchie, R.O. and Jun, X. (2018), “Design and strengthening mechanisms in hierarchical architected materials processed using additive manufacturing”, International Journal of Mechanical Sciences, Vol. 149, pp. 150–163. 10.1016/j.ijmecsci.2018.09.038CrossRefGoogle Scholar
Singh, G., ni, R. and Marwaha, A. (2015), “A Review of Metamaterials and its Applications”, International Journal of Engineering Trends and Technology, Vol. 19 No. 6, pp. 305–310. 10.14445/22315381/IJETT-V19P254Google Scholar
Ushijima, K., Cantwell, W.J., Mines, R.A., Tsopanos, S. and Smith, M. (2011), “An investigation into the compressive properties of stainless steel micro-lattice structures”, Journal of Sandwich Structures & Materials, Vol. 13 No. 3, pp. 303–329. 10.1177/1099636210380997CrossRefGoogle Scholar
Valdevit, L., Bertoldi, K., Guest, J. and Spadaccini, C. (2018), “Architected Materials: Synthesis, Characterization, Modeling, And Optimal Design”, Journal of Materials Research, Vol. 33 No. 3, pp. 241–246. 10.1557/jmr.2018.18CrossRefGoogle Scholar
Wang, C., Gu, X., Zhu, J., Zhou, H., Li, S. and Zhang, W. (2020), “Concurrent design of hierarchical structures with three-dimensional parameterized lattice microstructures for additive manufacturing”, Structural and Multidisciplinary Optimization, Vol. 61 No. 3, pp. 869–894. 10.1007/s00158-019-02408-2Google Scholar
Wang, X., Zhu, L., Sun, L. and Li, N. (2021), “Optimization of graded filleted lattice structures subject to yield and buckling constraints”, Materials & Design, Vol. 206, p. 109746. 10.1016/j.matdes.2021.109746Google Scholar
Wang, Y., Arabnejad, S., Tanzer, M. and Pasini, D. (2018), “Hip Implant Design With Three-Dimensional Porous Architecture of Optimized Graded Density”, Journal of Mechanical Design, Vol. 140 No. 11. 10.1115/1.4041208Google Scholar
Wu, J., Sigmund, O. and Groen, J.P. (2021a), “Topology optimization of multi-scale structures: A Review”, Structural and Multidisciplinary Optimization, Vol. 63 No. 3, pp. 1455–1480. 10.1007/s00158-021-02881-8CrossRefGoogle Scholar
Wu, J., Wang, W. and Gao, X. (2021b), “Design and Optimization of Conforming Lattice Structures”, IEEE transactions on visualization and computer graphics, Vol. 27 No. 1, pp. 43–56. 10.1109/TVCG.2019.2938946CrossRefGoogle Scholar
Zhu, L., Sun, L., Wang, X. and Li, N. (2021), “Optimisation of three-dimensional hierarchical structures with tailored lattice metamaterial anisotropy”, Materials & Design, Vol. 210, p. 110083. 10.1016/j.matdes.2021.110083CrossRefGoogle Scholar