Hostname: page-component-848d4c4894-x5gtn Total loading time: 0 Render date: 2024-06-04T10:29:03.564Z Has data issue: false hasContentIssue false
  • English
  • Français

Methods and Principles of Product Design for Small-Scale Production Based on 3D Printing

Part of: Design for Additive Manufacturing

Published online by Cambridge University Press:  26 July 2019

Jure Salobir ,
Jože Duhovnik  and
Jože Tavčar

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

Technology of 3D printing is opening the possibility for small-scale production in quantities between ten and several hundred pieces. The technology of adding material enables the production of complex and integrated functional concepts in a single-pass process, which consequently potentially reduces the need for assembly operations. Design approaches and manufacturing processing are not mastered well because of a constant stream of new materials and manufacturing options. Well-designed products need to consider attributes of 3D printing as early as the conceptual phase. The cost of the product can be reduced with a systematic research and considering principles for small-scale production. In a cheaper, alternative production process the quality range of products is often lower. It has to be compensated with appropriate construction solutions which are less tolerance-sensitive. Therefore, in order to support the designer, to reduce the costs and design time of the product, a computer program was created to provide the user with an insight into the appropriate 3D printing technology. For simplifying the use, the program is also integrated into the product development process.

Keywords

Computer softwareSmall-scale production3D printingDesign for Additive Manufacturing (DfAM)New product development
Type
Article
Information
Proceedings of the Design Society: International Conference on Engineering Design , Volume 1 , Issue 1 , July 2019 , pp. 789 - 798
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
© The Author(s) 2019

References

Adam, G. A. and Zimmer, D. (2014), “Design for additive manufacturing - element transitions and aggregated structures”, Cirp Journal of Manufacturing Science and Technology, Vol. 7, pp. 20–28. https://doi.org/10.1016/j.cirpj.2013.10.001Google Scholar
Baumers, M., Dickens, P., Tuck, C. and Hague, R. (2016), “The cost of additive manufacturing: machine productivity, economies of scale and technology-push”, Technological Forecasting and Social Change, Vol. 102, pp. 193–201. https://doi.org/10.1016/j.techfore.2015.02.015Google Scholar
Chen, D., Heyer, S., Ibbotson, S. and Salonitis, K. (2015), “Direct digital manufacturing: definition, evolution, and sustainability implications”, Journal of Cleaner Production, Vol. 107, pp. 615–625. https://doi.org/10.1016/j.jclepro.2015.05.009Google Scholar
Deradjat, D. and Minshall, T. (2017), “Implementation of rapid manufacturing for mass customisation”, Journal of Manufacturing Technology Management, Vol. 28 No. 1, pp. 95–121. https://doi.org/10.1108/JMTM-01-2016-0007Google Scholar
Duhovnik, J., Kušar, J., Tomaževič, R. and Starbek, M. (2006), “Development process with regard to customer requierments”, CE Concurrent Engineering: Research and Applications, Vol. 14, pp. 67–82. https://doi.org/10.1177/1063293X06064149Google Scholar
Duhovnik, J. and Tavčar, J. (2015), “Concurrent Engineering in Machinery”, In: Concurrent Engineering in the 21st Century. s.l.: Springer International publishing, p. 839. https://doi.org/10.1007/978-3-319-13776-6_22Google Scholar
Duray, R., Ward, P. T., Milligan, G. W. and Berry, W. L. (2000), “Approaches to mass customization: configurations and empirical validation”, Journal of Operations Management, Vol. 18 No 6, pp. 605–625. https://doi.org/10.1016/S0272-6963(00)00043-7Google Scholar
Garcia-Dominguez, A., Claver, J. and Sebastian, M. (2017), “Study for the selection of design software for 3D printing topological optimisation”, Procedia Manufacturing, Vol. 13, pp. 903–909. https://doi.org/10.1016/j.promfg.2017.09.155Google Scholar
Gurusamy, K., Srinivasaraghavan, N. and Adikari, S. (2016), “An Interated Framework for Design Thinking and Agile Methods for Digital Transformation”, In: Design, User Experience and Usability: Design Thinking and Methods: 5th International Conference, Toronto: s.n., pp. 34–42. https://doi.org/10.1007/978-3-319-40409-7_4Google Scholar
Holmström, J. (2010), “Rapid manufacturing in the spare parts supply chain: alternative approaches to capacity deployment”, Journal of Manufacturing Technology Management, Vol. 21 No. 6, pp. 687–697. https://doi.org/10.1108/17410381011063996Google Scholar
ISO/ASTM, (2016), ISO/ASTM 52915:2016(en) Specification for additive manufacturing file format (AMF) Version 1.2, s.l.: ISO/ASTM.Google Scholar
ISO-286, (2010), ISO 286-1:2010. s.l.:s.n.Google Scholar
Jacob, A., Windhuber, K., Ranke, D. and Lanza, G. (2018), “Planning, evaluation and optimisation of product design and manufacturing technology chains for new product and prodution technologes on the example of additive manufacturing”, Procedia CIRP, Vol. 70, pp. 108–113. https://doi.org/10.1016/j.procir.2018.02.049Google Scholar
MacDonald, M. (2012), Pro WPF 4.5 in C#, Windows Presentation Foundation in .NET 4.5, s.l.: Apress.Google Scholar
Pahl, G., Beitz, W., Feldhusen, J. and Grote, K.-H. (2007), Engineering Design - A Systematic Approach, s.l.: Springer.Google Scholar
Prasad, B. (1996), Concurrent Engineering Funamentals: Integrated Product and Process Organization, Vol. 1. s.l.: Pearson Education (US). https://doi.org/10.13140/rg.2.1.2613.0005Google Scholar
Schuh, G., Rebentisch, E. and Dölle, C. (2018), “Defining scaling strategies for the improvement of agility performance in product development projects”, Procedia CIRP, Vol. 70, pp. 29–34. https://doi.org/10.1016/j.procir.2018.01.006Google Scholar
Thompson, M. K., Moroni, G. and Vaneker, T. (2016), “Design for additive manufacturing: trends, opportunities, considerations, and constraints”, CIRP Annals - Manufacturing Technology, Vol. 65, pp. 737–760. http://doi.org/10.1016/j.cirp.2016.05.004Google Scholar
Weller, C., Kleer, R. and Piller, F. T. (2015), “Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited”, International Journal of Production Economics, Vol. 164, pp. 43–56. https://doi.org/10.1016/j.ijpe.2015.02.020Google Scholar
Yeh, C.-C. and Chen, Y.-F. (2018), “Critical success factors for adoption of 3D printing”, Technological Forecasting and Social Change, Vol. 132, pp. 209–216. https://doi.org/10.1016/j.techfore.2018.02.003Google Scholar
Zadnik, Ž., Karakašić, M., Kljajin, M. and Jožef, D. (2009), “Function and funcionality in the conceptual design process”, Journal of Mechanical Engineering, Vol. 55 No. 7–8, pp. 455–471.Google Scholar