Hostname: page-component-848d4c4894-pftt2 Total loading time: 0 Render date: 2024-05-16T21:23:38.477Z Has data issue: false hasContentIssue false
  • English
  • Français

XI.—Matrix Analysis of Beam-Columns by the Method of Finite Elements*

Published online by Cambridge University Press:  14 February 2012

R. G. Smith  and
J. A. Webster
R. G. Smith
Affiliation:
Marischal College, University of Aberdeen.
J. A. Webster
Affiliation:
Marischal College, University of Aberdeen.
Get access Rights & Permissions [Opens in a new window]

Synopsis

A matrix analysis is derived, using the concept of finite elements, for beam-columns of continuously varying cross-section and “small” initial curvature subject to tangential and normal forces acting at discrete points along the centroidal axis.

The relationships between loads applied to the ends of the member and their corresponding deformations are established in the form of stiffness matrices, which are the basis of the Equilibrium Method of Analysis of linear or non-linear elastic plane frames composed of such membeis. In addition, the end loads induced by the tangential and normal forces for various types of boundary conditions are obtained.

Finally, it is shown that the buckling load may be calculated by the determination of the lowest eigenvalue of a certain matrix, provided there is no lateial translation of the ends of the member.

Type
Research Article
Information
Proceedings of the Royal Society of Edinburgh Section A: Mathematics , Volume 67 , Issue 2 , 1965 , pp. 156 - 173
Copyright
Copyright © Royal Society of Edinburgh 1965

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

References to Literature

Case, J., 1925. The Strength of Materials. London: Edward Arnold and Co.Google Scholar
Gere, J. M., and Carter, W. O., 1962. “Critical Buckling Loads for Tapered Columns”, Proc. Amer. Soc. Civ. Engrs., 88, STi.Google Scholar
Lightfoot, E., 1961. Moment Distribution. London: E. & F. N. Spon Ltd.Google Scholar
Livesley, R. K., 1964. Matrix Methods of Structural Analysis. Oxford: Pergamon Press.Google Scholar
Livesley, R. K., and Chandler, D. B., 1956. Stability functions for structural frameworks. Manchester University Press.Google Scholar
Newmark, N. M., 1943. “Numerical Procedure for Computing Deflections, Moments and Buckling Loads”, Trans. Amer. Soc. Civ. Engrs., 108, 1161–1188.Google Scholar
Pei, M. L., 1959. “Matrix Solution of Beams with Variable Moment of Inertia”, Proc. Amer. Soc. Civ. Engrs., 85, ST8.Google Scholar
Timoshenko, S. P., and Gere, J. M., 1961. Theory of Elastic Stability, 2nd Edn.London: McGraw-Hill.Google Scholar