This paper is the first of a two-part review of train aerodynamics. After an initial introduction and broad survey of train aerodynamic issues, and a discussion of measurement, modelling and computational techniques, the nature of the flow around trains is considered – in the open air, with and without crosswinds, and in confined geometrical situations and tunnels. The flow in different regions around the train is described and the main flow features outlined. Part 2 of the paper will then consider a number of issues that are of concern in the design and operation of modern trains based on this description of the overall flow field.

Large transport aircraft are particularly susceptible to impact damage from runway debris thrown up by the landing gear. A methodology was developed to predict the trajectories of stones lofted by the nose wheel and subjected to aerodynamic forces due to the wake behind the nose landing gear and beneath the aircraft. In conjunction with finite element modelling of the stone/ground/tyre contact mechanics, an analytical model was used to perform a stochastic prediction of the trajectories of runway stones to generate impact threat maps which showed the relative likelihood of stones impinging upon various areas on the underside of a C-130 Hercules. The impact envelopes for the C-130 extended three to eighteen metres behind the nose wheel and two metres either side of the centre of the aircraft. The impact threat maps were especially sensitive to the values of the coefficients of lift and drag acting on the stone during its flight.

With the development of air traffic, flight delays happen frequently due to bad weather and traffic congestion. The problem can be solved partly by certain strategies, such as changing air routes. However, rerouting leads to a global imbalance in controller workload of current sectors and to an increase in co-ordination workload, and the workloads of some sectors may be beyond the controller’s ability to manage. Thus, airspace sectorisation is expected to migrate from the current static sectors to dynamically-changing ones capable of adapting to traffic demand. Besides addressing imbalance and controlling the increase in workload, the sectorisation has to meet additional geometric constraints such as convexity, connectivity, and minimum distance constraint.

This paper presents an integrated design and costing method for large stiffened panels for the purpose of investigating the influence and interaction of lay-up technology and production rate on manufacturing cost. A series of wing cover panels (≈586kg, 19·9m2) have been sized with realistic requirements considering manual and automated lay-up routes. The integrated method has enabled the quantification of component unit cost sensitivity to changes in annual production rate and employed equipment maximum deposition rate. Moreover the results demonstrate the interconnected relationship between lay-up process and panel design, and unit cost. The optimum unit cost solution when using automated lay-up is a combination of the minimum deposition rate and minimum number of lay-up machines to meet the required production rate. However, the location of the optimum unit cost, at the boundaries between the number of lay-up machines required, can make unit cost very sensitive to small changes in component design, production rate, and equipment maximum deposition rate.

The aerodynamic and aeroelastic behaviour of a rotor become more complex as advance ratios increase to achieve high-speed forward fight. As the rotor blades encounter large regions of cross and reverse flows during each revolution, strong variations in the local Mach regime are encountered, inducing complex elastic blade deformations. In addition, the wake system may remain in the vicinity of the rotor, adding complexity to the blade loading. The aeroelastic behaviour of a model rotor with advance ratios ranging from 0·5 to 2·0 has been evaluated with aerodynamics provided via a computational fluid dynamics (CFD) method. Significant radial blade-vortex interaction can occur at a high advance ratio; the advance ratio at which this occurs is dependent on the rotor configuration. This condition is accompanied by high vibratory loads, peak negative torsion, and peak torsion and in-plane loads. The high vibratory loading increases the sensitivity of the trim model, so that at some high advance ratios the vibratory loads must be filtered to achieve a trimmed state.

Topology optimisation is a useful tool for the design of aircraft structures. This work details how the new moving iso-surface threshold (MIST) topology optimisation method works and how it can be applied to aircraft structural design. This method has been coupled with commercial finite element analysis software in a simple manner without requiring the modification of the commercial software source code. In this way the user is able to take advantage of the finite element analysis tools such as automatic mesh generation and efficient solving. The extension of the method to 3D designs is also presented. The topology results of a 2D leading-edge rib for stiffness, stress and morphing objectives and a 3D wing skin stringer for stress design demonstrate the functionality of this method.