References
Adamczyk, J. J., and Goldstein, M. E., 1978, “Unsteady Flow in Supersonic Cascade with Subsonic Leading-Edge Locus,” AIAA Journal, Vol. 16, No. 12, December, pp. 1248–1254.
Allemang, R. J., 2003, “Modal Assurance Criterion – Twenty Years of Use and Abuse,” Sound and Vibration, August, pp. 14–21.
Allen, P. B., and Kelnar, J., 1998, “Evolution of a Vibrational Wave Packet on a Disordered Chain,” American Journal of Physics, Vol. 66, No. 6, pp. 497–506.
Anderson, P. W., 1958, “Absence of Diffusion in Certain Random Lattices,” Physical Review, Vol. 109, No. 5, pp. 1492–1505.
Andrew, A. L., and Tan, R. C. E., 1998, “Computation of Derivatives of Repeated Eigenvalues and the Corresponding Eigenvectors of Symmetric Matrix Pencils,” SIAM Journal of Matrix Analysis and Applications, Vol. 20, No. 1, pp. 78–100.
ANSYS Theory Manual, 2012, 12th ed., pp. 15–65 to 15–66.
Beck, J. A., 2010, “Stochastic Mistuning Simulation of Integrally Bladed Rotors Using Nominal and Non-nominal Component Mode Synthesis,” MS Thesis, Wright State University, Dayton, OH.
Bhartiya, Y., and Sinha, A., 2011, “Reduced Order Model of a Bladed Rotor with Geometric Mistuning: Comparison between Modified Modal Domain Analysis and Frequency Mistuning Approach,” GT2011-45391, presented at the ASME Turbo Expo, Vancouver, BC, Canada, June 6–11.
Bhartiya, Y., and Sinha, A., 2012, “Reduced Order Model of a Multistage Bladed Rotor with Geometric Mistuning via Modal Analyses of Finite Element Sectors,” ASME Journal of Turbomachinery, Vol. 134, July, pp. 041001-1 to 041001-8.
Bhartiya, Y., and Sinha, A., 2013a, “Reduced Order Model of a Bladed Rotor with Geometric Mistuning via Estimated Deviations in Mass and Stiffness Matrices,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 135, May, pp. 052501-1 to 052501-8.
Bhartiya, Y., and Sinha, A., 2013b, “Reduced Order Modeling of a Bladed Rotor with Geometric Mistuning: Alternative Bases and Extremely Large Mistuning,” International Journal of Gas Turbine, Propulsion and Power System, Vol. 5, No. 1, pp. 1–7.
Bhartiya, Y., and Sinha, A., 2014, “Geometric Mistuning Identification of Integrally Bladed Rotors Using Modified Modal Domain Analysis,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 136, December, pp. 122504-1 to 122504-8.
Bladh, R., Castanier, M. P., and Pierre, C., 2001, “Component-Mode-Based Reduced Order Modeling Techniques for Mistuned Bladed Disks – Part I: Theoretical Models, Part II: Application,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 123, January, pp. 89–108.
Bladh, R., Castanier, M. P., and Pierre, C., 2003, “Effects of Multistage Coupling and Disk Flexibility on Mistuned Bladed Disk Dynamics,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 125, pp. 121–130.
Brown, J. M., 2008, ‘‘Reduced Order Modeling Methods for Turbomachinery Design,” PhD Dissertation, Wright State University, Dayton, OH.
Castanier, M. P., and Pierre, C., 1997, “Consideration on the Benefits of Intentional Blade Mistuning for the Forced Response of Turbomachinery Rotors,” Proceedings of the ASME Aerospace Division, AD – 55, pp. 419–425.
Chan, Y.-J., and Ewins, D. J., 2011, “The Amplification of Vibration Response Levels of Mistuned Bladed Disks: Its Consequences and Its Distribution in Specific Situations,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 133, October, 102502-1 to 102502-8.
Chen, G., 2005, Nanoscale Energy Transport and Conversion, Oxford: Oxford University Press.
Choi, B-K., Lentz, J., Rivas-Guerra, A., and Mignolet, M. P., 2003, “Optimization of Intentional Mistuning Patterns for the Reduction of the Forced Response Effects of Unintentional Mistuning: Formulation and Assessment,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 125, pp. 131–140.
Cleland, A. N., 2003, Foundations of Nanomechanics, Berlin: Springer-Verlag.
Craig, R. R., 1981, Structural Dynamics: An Introduction to Computer Methods, New York: John Wiley and Sons.
Crawley, E. F., and Hall, K. C., 1985, “Optimization and Mechanisms of Mistuning in Cascades,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 107, April, pp. 418–426.
D’Amato, F., and Rotea, M., 2005, “LFTB: An Efficient Algorithm to Bound Linear Fractional Transformations,” Optimization and Engineering, Vol. 6, pp. 177–201.
Dowell, E. H., 2014 , A Modern Course in Aeroelasticity, Berlin: Springer.
Ewins, D. J., 1969, “The Effects of Detuning upon the Forced Vibrations of Bladed Disks,” Journal of Sound and Vibration, Vol. 9, No. 1, pp. 65–79.
Fan, M., Tits, A., and Doyle, J. C., 1991, “Robustness in the Presence of Joint Parametric Uncertainty and Unmodeled Dynamics,” Vol. 36, No. 1, pp. 25–38.
Feiner, D. M., and Griffin, J. H., 2002, “A Fundamental Model of Mistuning for a Single Family of Modes,” ASME Journal of Turbomachinery, Vol. 124, No. 4, pp. 597–605.
Feiner, D.M., and Griffin, J. H., 2004a, “Mistuning Identification of Bladed Disks Using a Fundamental Mistuning Model – Part 1: Theory,” ASME Journal of Turbomachinery, Vol. 126, No. 1, pp. 150–158.
Feiner, D.M., and Griffin, J. H., 2004b, “Mistuning Identification of Bladed Disks Using a Fundamental Mistuning Model – Part 2: Application,” ASME Journal of Turbomachinery, Vol. 126, No. 1, pp. 159–165.
Fox, R. L., and Kapoor, M. P., 1968, “Rates of Change of Eigenvalues and Eigenvectors,” AIAA Journal, Vol. 6, No. 12, pp. 2426–2429.
Ghanem, R. G., and Spanos, P. D., 1990, Stochastic Finite Elements: A Spectral Approach, New York: Springer-Verlag.
Jones, K., 2004, “Mistuning for Minimum Maximum Bladed Disk Forced Response,” AIAA 2004–3755, 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Fort Lauderdale, FL, July.
Jones, K., and Cross, C., 2003, “On Antiresonance in the Forced Response of Mistuned Bladed Disks,” Shock and Vibration, Vol. 10, pp. 135–146.
Kaza, K. R. V., and Kielb, R. E., 1982, “Flutter and Response of a Mistuned Cascade in Incompressible Flow,” AIAA Journal, Vol. 20, No. 8, August, pp. 1120–1127.
Kenyon, J. A., and Griffin, J. H., 2003, “Experimental Demonstration of Maximum Mistuned Bladed Disk Forced Response,” ASME Journal of Turbomachinery, Vol. 125, October, pp. 673–681.
Kenyon, J. A., Griffin, J. H., and Feiner, D. M., 2003, “Maximum Bladed Disk Forced Response from Distortion of a Structural Mode,” ASME Journal of Turbomachinery, Vol. 125, April, pp. 353–363.
Kenyon, J. A., Griffin, J. H., and Kim, N. E., 2005, “Sensitivity of Tuned Bladed Disk Response to Frequency Veering,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 127, October, pp. 835–842.
Kielb, R. E., and Kaza, K. R.V., 1983, “Aeroelastic Characteristics of a Cascade of Mistuned Blades in Subsonic and Supersonic Flows,” ASME Journal of Vibration, Acoustics, Stress, and Reliability in Design, Vol. 105, pp. 425–433.
Kittel, C., 1996, Introduction to Solid State Physics, 7th ed., New York: John Wiley and Sons.
Laxalde, D., Thouverez, F., and Lombard, J.-P., 2007, “Dynamical Analysis of Multi-Stage Cyclic Structures,” Mechanics Research Communication, Vol. 34, pp. 379–384.
Lim, S. H., Pierre, C., and Castanier, M.P., 2004, “Mistuning Identification and Reduced-Order Model Updating for Bladed Disks on a Component Mode Mistuning Technique,” 9th National Turbine Engine High Cycle Fatigue Conference, Pinehurst, North Carolina.
MATLAB, 1992, “MATLAB Reference Guide,” The MathWorks, Inc., Natick, MA.
Mignolet, M. P., and Lin, C.-C., 1993, “The Combined Closed-Form Perturbation Approach to the Analysis of Mistuned Bladed Disks,” ASME Journal of Turbomachinery, Vol. 115, October, pp. 771–780.
Mignolet, M. P., Delor, J. P., and Rivas-Guerra, A., 1999a, “Identification of Mistuning Characteristics of Bladed Disks from Free Response Data – Part I,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 123, pp. 395–403.
Mignolet, M. P., Delor, J. P., and Rivas-Guerra, A., 1999b, “Identification of Mistuning Characteristics of Bladed Disks from Free Response Data – Part II,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 123, pp. 404–411.
Mignolet, M. P., Hu, W., and Jadic, I., 2000, “On the Forced Response of Harmonically and Partially Mistuned Bladed Disks, Part I: Harmonic Mistuning, Part II: Partial Mistuning and Applications,” International Journal of Rotating Machinery, Vol. 6, pp. 29–56.
Mignolet, M. P., Rivas-Guerra, A., and LaBorde, B., 1999, “Towards a Comprehensive Direct Prediction Strategy of the Effects of Mistuning on the Forced Response of Turbomachinery Blades,” Aircraft Engineering and Aerospace Technology, Vol. 71, No. 5, pp. 462–469.
Nelson, R. B., 1976, “Simplified Calculation of Eigenvector Derivatives,” AIAA Journal, Vol. 14, pp. 1201–1205.
Oppenheim, A. V., and Shaeffer, R. W., 1975, Digital Signal Processing, Englewood Cliffs, NJ: Prentice-Hall.
Papoulis, A., 1965, Probability, Random Variables, and Stochastic Processes, New York: McGraw-Hill.
Petrov, E. P., and Ewins, D. J., 2003, “Analysis of the Worst Mistuning Patterns in Bladed Disk Assemblies,” ASME Journal of Turbomachinery, Vol. 125, October, pp. 623–631.
Phani, A. S., Woodhouse, J., and Fleck, N. A., 2006, “Wave Propagation in Two-Dimensional Periodic Lattices,” Journal of Acoustical Society of America, Vol. 119, No. 4, pp. 1995–2005.
Prescott, J., 1946, Applied Elasticity, New York: Dover Publications.
Rao, J. S., 1991, Turbomachine Blade Vibration, New York: John Wiley and Sons.
Rivas-Guerra, A. J., and Mignolet, M. P., 2003, “Maximum Amplification of Blade Response Due to Mistuning: Localization and Mode Shape Aspects of the Worst Disks,” ASME Journal of Turbomachinery, Vol. 125, July, pp. 442–454.
Rotea, M., and D’ Amato, F., 2002, “New Tools for Analysis and Optimization of Mistuned Bladed Disks,” AIAA 2002 – 4081, Proceedings of the 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, July, Indianapolis, IN.
Shapiro, B., 1998, “Symmetry Approach to Extension of Flutter Boundaries via Mistuning,” AIAA Journal of Propulsion and Power, Vol. 14, No. 3, pp. 354–366.
Shapiro, B., 1999, “Solving for Mistuned Forced Response by Symmetry,” AIAA Journal of Propulsion and Power, Vol. 15, No. 2, pp. 310–325.
Sinha, A., 1986, “Calculating the Statistics of Forced Response of a Mistuned Bladed Disk Assembly,” AIAA Journal, Vol. 24, No. 11, pp. 1797–1801.
Sinha, A., 1997, “Computing the Maximum Amplitude of a Mistuned Bladed Disk Assembly via Infinity Norm,” Proceedings of the ASME Aerospace Division, AD – 55, pp. 427–432.
Sinha, A., 2005, “Statistical Distribution of the Peak Maximum Amplitude of the Forced Response of a Mistuned Bladed Disk,” GT2005 – 69070, ASME Turbo Expo, Reno-Tahoe, NV.
Sinha, A., 2006a, “Computation of Eigenvalues and Eigenvectors a Mistuned Bladed Disk,” GT2006 – 90087, ASME Turbo Expo, Barcelona, Spain.
Sinha, A., 2006b, “Statistical Distribution of the Peak Maximum Amplitude of the Forced Response of a Mistuned Bladed Disk: Some Investigations and Applications of Neural Networks,” GT2006 – 90088, ASME Turbo Expo, Barcelona, Spain.
Sinha, A., 2006c, “Computation of the Statistics of Forced Response of a Mistuned Bladed Disk Assembly via Polynomial Chaos,” ASME Journal of Vibration and Acoustics, Vol. 128, August, pp. 449–457.
Sinha, A., 2007, Linear Systems: Optimal and Robust Control, Boca Raton, FL: CRC Press (Taylor Francis Group).
Sinha, A., 2008a, “Mistuning Analyses of a Bladed Disk: Pole-Zero and Modal Approaches,” GT2008 – 50191, ASME Turbo Expo, Berlin, Germany.
Sinha, A. 2008b, “Reduced-Order Model of a Mistuned Multi-Stage Bladed Rotor,” International Journal of Turbo and Jet Engines, Vol. 25, pp. 145–153 (also, ASME GT 2007 – 27277).
Sinha, A., 2009, “Reduced-Order Model of a Bladed Rotor with Geometric Mistuning,” ASME Journal of Turbomachinery , Vol. 131, 031007-1-7, July.
Sinha, A., 2010, Vibration of Mechanical Systems, New York: Cambridge University Press.
Sinha, A., and Bhartiya, Y., 2010, “Modeling Geometric Mistuning of a Bladed Rotor: Modified Modal Domain Analysis,” IUTAM Symposium on Emerging Trends in Rotor Dynamics, Gupta, K. (ed.), IUTAM Book Series, New York: Springer, pp. 177–184.
Sinha, A., and Chen, S., 1989, “A Higher-Order Technique to Compute the Statistics of Forced Response of a Mistuned Bladed Disk,” Journal of Sound and Vibration, Vol. 130, pp. 207–221.
Sinha, A., Hall, B., Cassenti, B., and Hilbert, G., 2008, “Vibratory Parameters of Blades from Coordinate Measurement Machine Data,” ASME Journal of Turbomachinery, Vol. 130, January, pp. 011013-1 to 011013-8 (also, ASME GT 2005 – 69004).
Song, S. H., Castanier, M. P., and Pierre, C., 2005, “Multi-Stage Modeling of Turbine Engine Rotor Vibration,” DETC 2005 – 85740, Proceedings of IDETC/CIE 2005, ASME 2005 International Design Engineering Technical Conference, Long Beach, CA, September, pp. 1533–1543.
Statistics Toolbox for use with MATLAB, 2002, Natick, MA: The MathWorks, Inc.
Sternchuss, A., and Balmes, E., 2007, “Reduction of Multistage Rotor Using Cyclic Modeshapes,” GT2007-27974, Proceedings of ASME Turbo Expo, Montreal, Canada.
Strang, G., 1988, Linear Algebra and Its Applications, 3rd ed., San Diego, CA: Harcourt Brace Jovanovich Publishers.
Thompson, E. A., and Becus, G. A., 1993, “Optimization of Blade Arrangement in a Randomly Mistuned Cascade Using Simulated Annealing,” AIAA 93 – 2254, Proceedings of AIAA/SAE/ASME/ASEE 29th Joint Propulsion Conference and Exhibit, Monterey, CA.
Vidyasagar, M., 1993, Nonlinear Systems Analysis, New Jersey: Prentice-Hall.
Vishwakarma, V., and Sinha, A., 2015, “Forced Response Statistics of a Bladed Rotor with Geometric Mistuning,” AIAA Journal, Vol. 53, No. 9, pp. 2776–2781.
Vishwakarma, V., Sinha, A., Bhartiya, Y., and Brown, J.M., 2015, “Modified Modal Domain Analysis of a Bladed Rotor Using Coordinate Measurement Machine Data,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 137, No. 4, pp. 042502-1 to 042502-8.
Wagner, J. T., 1967, “Coupling of Turbomachine Blade Vibration through the Rotor,” ASME Journal of Engineering for Power, Vol. 89, No. 4, October, pp. 502–512.
Wei, S.-T., and Pierre, C., 1988, “Localization Phenomena in Mistuned Assemblies with Cyclic Symmetry, Part I: Free Vibration,” ASME Journal of Vibration, Acoustics, Stress, and Reliability in Design, Vol. 110, pp. 429–438.
Weiner, N., 1958, Nonlinear Problems in Random Theory, Cambridge, MA: MIT Press.
Whitehead, D. S., 1960, “Force and Moment Coefficients for Vibrating Airfoils in Cascade,” R. & M. No. 3254, Aeronautical Research Council Report and Memoranda, London, England.
Whitehead, D. S., 1966, “Effects of Mistuning on the Vibration of Turbomachine Blades Induced by Wakes,” Journal of Mechanical Engineering Science, Vol. 8, No. 1, pp. 15–21.
Whitehead, D. S., 1998, “The Maximum Factor by Which Forced Vibration of Blades Can Increase Due to Mistuning,” ASME Journal of Engineering for Gas Turbine and Power, Vol. 120, No. 1, pp. 115–119.
Xiangjun, Q., and Shijing, Z., 1986, “A Development of Eigenvalue Perturbation Method for Linear Discrete Systems,” Proceedings of the 4th International Modal Analysis Conference, Los Angeles, CA, Vol. 1, pp. 556–562.
Xiao, B., Rivas-Guerra, A. J., and Mignolet, M. P., 2004, “Maximum Amplification of Blade Response Due to Mistuning in Multi-Degree-of-Freedom Blade Models,” GT2004-54030, Proceedings of ASME Turbo Expo, Vienna, Austria.
Yang, M.-T., and Griffin, J. H., 1999, “A Reduced Order Model of Mistuning Using a Subset of Nominal System Modes,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 123, No. 4, pp. 893–900.
Yao, J., Wang, J., and Li, Q., 2009, “Robustness Analysis of Mistuned Bladed Disk Using the Upper Band of Structured Singular Value,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 131, pp. 032501-1 to 032501-7.
Zhang, Y.-Q., and Wang, W.-L., 1995, “Eigenvector Derivatives of Generalized Nondefective Eigenproblems with Repeated Eigenvalues,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 117, pp. 207–212.
