1.
Riggins, D., Nelson, H.F. and Johnson, E., Blunt body wave drag reduction using focused energy deposition, AIAA J, 1999, 27, pp 460–467.
2.
Kobayashi, H., Maru, Y. and Fukiba, K., Experimental study on aerodynamic characteristics of telescopic aerospikes with multiple disks, J Spacecraft and Rockets, 2007, 44, (1), pp 33–41.
3.
Bogdonoff, S.M. and Vas, I.E., Preliminary investigations of spike bodies at hypersonic speeds, J Aerospace Sciences, February 1959, 26, (2), pp 65–74.
4.
Maull, D.J., Hypersonic flow over symmetric spiked bodies, J Fluid Mechanics, 1960, 8, (584).
5.
Wood, C.J.. Hypersonic flow over spiked cones, J Fluid Mechanics, 1961, 12, (614).
6.
Menezes, V., Saravanan, S., Jagdeesh, G. and Reddy, K.P., Experimental investigation of hypersonic flow over highly blunted cones with aerospikes, AIAA J, 2003, 41, (10), pp 1955–1966.
7.
Mehta, R.C., Pressure oscillations over a spiked blunt body at hypersonic Mach number, Computational Fluid Dynamics J, July 2000, 9, (2), pp 88–95.
8.
Mehta, R.C., Numerical analysis of pressure oscillations over axisym-metric spiked blunt bodies at Mach 6·8, Shock Waves, 2002, 11, pp 431–440.
9.
Milicv, S.S., Pavlovic, M.D., Ristic, S. and Vitic, A., On the influence of spike shape at supersonic flow past blunt bodies, Faculty Universities, Series: Mechanics, Automatic Control and Robotic, 2002, 3, (12), pp 371–382.
10.
Caarese, W. and Hankey, W.L., Modes of shock wave oscillations on spike tipped bodies, AIAA J, 23, (2), 1985, pp 185–192.
11.
Hahn, M., Pressure distribution and mass injection effects in the transitional separated flow over a spiked body at supersonic speed, J Fluid Mechanics, February 1966, 24, part 2, pp 209–223.
12.
Milicev, S.S. and Pavlovic, M.D., Influence of spike shape at supersonic flow past blunt nosed bodies experimental study, AIAA J, 2002, 40, (5), pp 1018–1020.
13.
Kubota, H., Some aerodynamic and aerothermodynamic considerations for reusable launch vehicles, AIAA-2004-2428.
14.
Crawford, D.H., Investigation of the flow over a spiked-nose hemisphere at a Mach number of 6·8, NASA TN-D 118, December 1959.
15.
Motoyama, N., Mihara, K., Miyajima, R., Watanuki, W. and Kubota, H., Thermal protection and drag reduction with use of spike in hypersonic flow, AIAA Paper 2001-1828, 2001.
16.
Yamauchi, M., Fujjii, K., Tamura, Y. and Higashino, F., Numerical investigation of hypersonic flow around a spiked blunt body, AIAA paper 93-0887, January 1993.
17.
Shoemaker, J.M., Aerodynamic spike flowfields computed to select optimum configuration at Mach 2·5 with experimental validation, AIAA Paper 90-0414, 1990.
18.
Fujita, M. and Kubota, H., Numerical simulation of flowfield over a spiked blunt nose, Computational Fluid Dynamics J, 1992, 1, (2), pp 187–195.
19.
Boyce, R., Neely, A., Odam, J. and Stewart, B., CFD Analysis of the HyCAUSE Nose-Cone, AIAA Paper 2005-3339, May 2005.
20.
Milicev, S.S., Pavlovic, M.D., Ristic, S. and Vitic, A., On the influence of spike shape at supersonic flow past blunt bodies, Mechanics, Automatic Control and Robotics, 2002, 3, (12), pp 371–382.
21.
Mehta, R.C., Peak heating for reattachment of separated flow on a spiked blunt body, Heat and Mass Transfer, 2000, 36, pp 277–283.
22.
Mehta, R.C. and Jayachandran, T., Navier-Stokes solution for a heat shield with and without a forward facing spike, Computers and Fluids, 1997, 26, (7), pp 741–754.
23.
Mehta, R.C., Heat transfer study of high speed over a spiked blunt body, Int J Numerical Methods for Heat & Fluid Flow, 2000, 10, (7), pp 750 – 769.
24.
Gauer, M. and Paull, A., Numerical investigation of a spiked nose cone at hypersonic speeds, J Spacecraft and Rockets, 2008, 45, (3), pp 459–471.
25.
Peyret, R. and Vivind, H., Computational Methods for Fluid Flows, Springer-Verlag, 1993, Berlin, Germany, pp 109–111.
26.
Jameson, A., Schmidt, W. and Turkel, E., Numerical simulation of Euler equations by finite volume methods using Runge-Kutta Time Stepping Schemes, AIAA paper 81-1259, June 1981.
27.
Mehta, R.C., Numerical investigation of viscous flow over a hemisphere-cylinder, Acta Mechanica, 1998, 128, (1-2), pp 48–58.
28.
Shang, J.S., Numerical simulation of wing-fuselage aerodynamic interference, AIAA J, 1984, 22, (10), pp 1345–1353.
29.
Mehta, R.C., A quasi-three dimensional automatic grid generation method, in the proceedings of the 25th National & International Conference on Fluid Dynamics & Fluid Power, Indian Institute of Technology, Delhi, India, December 1998, pp 89–98.
30.
Mehta, R.C., Numerical heat transfer study over spiked-blunt body at Mach 6.8, AIAA Paper 2000-0344, January 2000 and also J Spacecraft & Rockets, 2000, 37, (5), pp 700 – 701.
31.
Truitt, R.W., Hypersonic Aerodynamic, The Ronald Press Co, New York, USA, 1959.
32.
Liepmann, H.W. and Roshko, A., Elements of Gas Dynamics, 2007, Dover Publications Inc, First South Asian Edition, New Delhi, India.
33.
Mair, W.A., Experiments on separation on boundary layers on probes in front of blunt bodies at supersonic air stream, Philosophical Magazine, 1952, 43, pp 695–716.
34.
Kalimuthu, R., Mehta, R.C. and Rathakrishnan, E., Experimental Investigation on spiked body in hypersonic flow, Aeronaut J, October 2008, 112, (1136), pp 593–598.
35.
Kalimuthu, R., Mehta, R.C. and Rathakrishnan, E., Blunt body drag reduction using aero-spike and aero-disk at Mach 6, in the proceedings of International Conference on High Speed Trans-atmospheric Air & Space Transportation, Hyderabad, India, June 2007, pp 178–188.
