Hostname: page-component-74656f9884-kv2lp Total loading time: 0 Render date: 2026-11-06T03:07:09.019Z Has data issue: false hasContentIssue false

A modal Rayleigh method for thermoacoustic analysis of hydrogen–air flames

Published online by Cambridge University Press:  27 August 2026

Borja Pedro-Beltran*
Affiliation:
Institute of Aerodynamics and Chair of Fluid Dynamics, RWTH Aachen University, Wüllnerstraße 5a, Aachen, Germany
Zin Shahin
Affiliation:
Institute of Aerodynamics and Chair of Fluid Dynamics, RWTH Aachen University, Wüllnerstraße 5a, Aachen, Germany
Sohel Herff
Affiliation:
Jülich Supercomputing Centre, Forschungszentrum Jülich GmbH, Wilhelm-Johnen-Straße, Jülich, Germany
Matthias Meinke
Affiliation:
Institute of Aerodynamics and Chair of Fluid Dynamics, RWTH Aachen University, Wüllnerstraße 5a, Aachen, Germany JARA Centre for Simulation and Data Science, RWTH Aachen University, Weg 23, Aachen, Germany
Dominik Krug
Affiliation:
Institute of Aerodynamics and Chair of Fluid Dynamics, RWTH Aachen University, Wüllnerstraße 5a, Aachen, Germany
Wolfgang Schröder
Affiliation:
Institute of Aerodynamics and Chair of Fluid Dynamics, RWTH Aachen University, Wüllnerstraße 5a, Aachen, Germany JARA Centre for Simulation and Data Science, RWTH Aachen University, Weg 23, Aachen, Germany
*
Corresponding author: Borja Pedro-Beltran, b.pedro@aia.rwth-aachen.de

Abstract

Content of image described in text.

A frequency-resolved modal Rayleigh method, in which the classical Rayleigh criterion is reformulated using dynamic mode decomposition (DMD), is presented. This approach yields mode-specific, closed-form measures of thermoacoustic excitation and absorption. The framework reconstructs pressure and heat-release fields with an acoustic scaling, separates self- and cross-modal contributions through a finite-time kernel and augments the in-phase Rayleigh term with a phase-invariant quadrature efficiency to quantify the coupling magnitude. The method is applied to two-dimensional, acoustically forced, anechoic hydrogen–air slit flames at four equivalence ratios ($\phi = 0.4, 0.5, 0.6, 0.7$) excited at 220, 437 and 800 Hz, in addition to multi-tone forcing. The analysis shows that the flame–acoustic coupling is primarily concentrated near the flame tip, that the coupling strength and frequency response vary systematically with equivalence ratio and that low-frequency forcing promotes nonlinear energy transfer into higher harmonics. Lean flames remain near linear and decouple at high frequency, whereas richer flames that lock in at higher-frequency excitation exhibit stronger nonlinear distortion at lower frequencies. Where the modal Rayleigh index is positive, the far-field sound pressure level increases at the corresponding frequency, confirming that the proposed metrics isolate feedback-effective modes. Overall, the DMD-based modal Rayleigh method provides a compact, mode-resolved description of flame–acoustic interactions.

Information

Type
JFM Papers
Copyright
© The Author(s), 2026. Published by Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

Supplementary material: File

Pedro-Beltran et al. supplementary movie 1

φ = 0.4 flame at different excitation frequencies.
Download Pedro-Beltran et al. supplementary movie 1(File)
File 1.5 MB
Supplementary material: File

Pedro-Beltran et al. supplementary movie 2

φ = 0.5 flame at different excitation frequencies.
Download Pedro-Beltran et al. supplementary movie 2(File)
File 2.6 MB
Supplementary material: File

Pedro-Beltran et al. supplementary movie 3

φ = 0.6 flame at different excitation frequencies.
Download Pedro-Beltran et al. supplementary movie 3(File)
File 4.2 MB
Supplementary material: File

Pedro-Beltran et al. supplementary movie 4

φ = 0.7 flame at different excitation frequencies.
Download Pedro-Beltran et al. supplementary movie 4(File)
File 4.8 MB
Supplementary material: File

Pedro-Beltran supplementary material 5

Pedro-Beltran supplementary material
Download Pedro-Beltran supplementary material 5(File)
File 2.6 MB