Skip to main content
×
Home
    • Aa
    • Aa

Comparison of conditional sampling and averaging techniques in a turbulent boundary layer

  • C. S. Subramanian (a1), S. Rajagopalan (a1), R. A. Antonia (a1) and A. J. Chambers (a1)
Abstract

Visual examination of simultaneous temperature traces from a rake of cold wires placed across a turbulent boundary layer had enabled the identification of coherent temperature fronts. An X-wirelcold-wire arrangement was used simultaneously with the rake to provide measurements of the velocity fluctuations u (longitudinal) and v (normal) and the temperature fluctuation θ. Conditional averages of u, v, θ and products uv, uθ, vθ were obtained by application of conditional techniques based on the detection of the temperature fronts using information obtained at only one point in space. These averages, obtained at various positions across the layer, have been compared with those obtained when the rake was used to detect the fronts. The comparison has indicated that none of the one-point detection techniques is in good quantitative agreement with the rake detection technique, the largest correspondence between the rake technique and any ofthe other one-point techniques being only 51 yo. With the exception of the hole technique used in conjunction with the quadrant decomposition analysis, conditional averages obtained from one-point techniques are in reasonable qualitative agreement with those deduced using the rake.

Copyright
Recommend this journal

Email your librarian or administrator to recommend adding this journal to your organisation's collection.

Journal of Fluid Mechanics
  • ISSN: 0022-1120
  • EISSN: 1469-7645
  • URL: /core/journals/journal-of-fluid-mechanics
Please enter your name
Please enter a valid email address
Who would you like to send this to? *
×
MathJax