Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by CrossRef.
Kavas, Isa
Yasa, Tolga
and
Kurtulus, D. Funda
2018.
Advances in Sustainable Aviation.
p.
139.
Javadi, Khodayar
2018.
Introducing Film Cooling Uniformity Coefficient.
Heat Transfer Engineering,
Vol. 39,
Issue. 2,
p.
180.
Dutta, Kishore
2018.
Spectral calculations for pressure–velocity and pressure–strain correlations in homogeneous shear turbulence.
Journal of Statistical Mechanics: Theory and Experiment,
Vol. 2018,
Issue. 2,
p.
023204.
2018.
Computational Fluid Dynamics.
p.
451.
Król, Aleksander
and
Król, Małgorzata
2018.
Study on numerical modeling of jet fans.
Tunnelling and Underground Space Technology,
Vol. 73,
Issue. ,
p.
222.
Qiu, Guodong
Xu, Zhenfei
Cai, Weihua
and
Jiang, Yiqiang
2018.
Numerical study on the condensation flow and heat transfer characteristics of hydrocarbon mixtures inside the tubes of liquefied natural gas coil-wound heat exchangers.
Applied Thermal Engineering,
Vol. 140,
Issue. ,
p.
775.
Safikhani, Hamed
Zamani, Javid
and
Musa, Mohammadreza
2018.
Numerical study of flow field in new design cyclone separators with one, two and three tangential inlets.
Advanced Powder Technology,
Vol. 29,
Issue. 3,
p.
611.
Sultan, Rasel A.
Rahman, M. Aziz
Rushd, Sayeed
Zendehboudi, Sohrab
and
Kelessidis, Vassilios C.
2018.
Validation of CFD model of multiphase flow through pipeline and annular geometries.
Particulate Science and Technology,
p.
1.
Le Faucheux, Pierre
Dorchies, David
Li, Xuefang
Gamri, Souha
Dejean, Cyril
Tomas, Séverine
and
Belaud, Gilles
2018.
Advances in Hydroinformatics.
p.
821.
Ni, Peiyuan
Ersson, Mikael
Jonsson, Lage Tord Ingemar
and
Jönsson, Pär Göran
2018.
A Study on the Nonmetallic Inclusion Motions in a Swirling Flow Submerged Entry Nozzle in a New Cylindrical Tundish Design.
Metallurgical and Materials Transactions B,
Vol. 49,
Issue. 2,
p.
723.
Tajnesaie, Mohanna
Jafari Nodoushan, Ehsan
Barati, Reza
and
Azhdary Moghadam, Mehdi
2018.
Performance comparison of four turbulence models for modeling of secondary flow cells in simple trapezoidal channels.
ISH Journal of Hydraulic Engineering,
p.
1.
Mohamed, M.A.
Sherry, M.
Plessix, P. du
Wood, D.H.
and
Martinuzzi, R.J.
2018.
Measurements to assess simple RANS model behaviour in stagnating flow.
International Journal of Heat and Fluid Flow,
Vol. 70,
Issue. ,
p.
226.
Höhne, Thomas
Kliem, Sören
and
Bieder, Ulrich
2018.
IAEA CRP benchmark of ROCOM PTS test case for the use of CFD in reactor design using the CFD-Codes ANSYS CFX and TrioCFD.
Nuclear Engineering and Design,
Vol. 333,
Issue. ,
p.
161.
Lyubimova, T.
Lepikhin, A.
Parshakova, Ya.
Lyakhin, Yu.
and
Tiunov, A.
2018.
The modeling of the formation of technogenic thermal pollution zones in large reservoirs.
International Journal of Heat and Mass Transfer,
Vol. 126,
Issue. ,
p.
342.
Zaman, Ehsan
Vakil, Ali
Martinez, Mark
and
Olson, James
2018.
An integral criterion for turbulence suppression in swirling flows.
The Canadian Journal of Chemical Engineering,
Wu, Liang
Gong, Ming
and
Wang, Jingtao
2018.
Development of a DEM–VOF Model for the Turbulent Free-Surface Flows with Particles and Its Application to Stirred Mixing System.
Industrial & Engineering Chemistry Research,
Vol. 57,
Issue. 5,
p.
1714.
Wu, Yongyan
Liu, Zhaowei
Chen, Yongcan
and
Li, Manjie
2018.
Investigation of velocity distribution and turbulence characteristics in subcritical circular open channel flows using a modified Reynolds stress model.
Journal of Hydro-environment Research,
Vol. 19,
Issue. ,
p.
68.
Mousavi, Seyed Mahmood
Pourabidi, Reza
and
Goshtasbi-Rad, Ebrahim
2018.
Numerical investigation of over expanded flow behavior in a single expansion ramp nozzle.
Acta Astronautica,
Vol. 146,
Issue. ,
p.
273.
Biswas, Sayan
2018.
Physics of Turbulent Jet Ignition.
p.
65.
Lee, T-W
2018.
The Reynolds stress in turbulence from a Lagrangian perspective.
Journal of Physics Communications,
Vol. 2,
Issue. 5,
p.
055027.