Skip to main content
×
Home
    • Aa
    • Aa
  • Get access
    Check if you have access via personal or institutional login
  • Cited by 112
  • Cited by
    This article has been cited by the following publications. This list is generated based on data provided by CrossRef.

    Dinh, Nghia Trong Sowade, Enrico Blaudeck, Thomas Hermann, Sascha Rodriguez, Raul D. Zahn, Dietrich R.T. Schulz, Stefan E. Baumann, Reinhard R. and Kanoun, Olfa 2016. High-resolution inkjet printing of conductive carbon nanotube twin lines utilizing evaporation-driven self-assembly. Carbon, Vol. 96, p. 382.


    Florian, C. Caballero-Lucas, F. Fernández-Pradas, J.M. Ogier, S. Winchester, L. Karnakis, D. Geremia, R. Artigas, R. and Serra, P. 2016. Printing of silver conductive lines through laser-induced forward transfer. Applied Surface Science, Vol. 374, p. 265.


    Le, Duy Dam Nguyen, Thi Ngoc Nhien Doan, Duc Chanh Tin Dang, Thi My Dung and Dang, Mau Chien 2016. Fabrication of interdigitated electrodes by inkjet printing technology for apllication in ammonia sensing. Advances in Natural Sciences: Nanoscience and Nanotechnology, Vol. 7, Issue. 2, p. 025002.


    Sarojini KG, Kalpana Dhar, Purbarun Varughese, Susy and Das, Sarit K. 2016. Coalescence Dynamics of PEDOT:PSS Droplets Impacting at Offset on Substrates for Inkjet Printing. Langmuir, Vol. 32, Issue. 23, p. 5838.


    Sousa, Felipe L N Mojica-Sánchez, Lizeth C Gavazza, Sávia Florencio, Lourdinha Vaz, Elaine C R and Santa-Cruz, Petrus A 2016. Printable UV personal dosimeter: sensitivity as a function of DoD parameters and number of layers of a functional photonic ink. Materials Research Express, Vol. 3, Issue. 4, p. 045701.


    Sowade, Enrico Polomoshnov, Maxim and Baumann, Reinhard R. 2016. The design challenge in printing devices and circuits: Influence of the orientation of print patterns in inkjet-printed electronics. Organic Electronics, Vol. 37, p. 428.


    Sowade, Enrico Mitra, Kalyan Yoti Ramon, Eloi Martinez-Domingo, Carme Villani, Fulvia Loffredo, Fausta Gomes, Henrique L. and Baumann, Reinhard R. 2016. Up-scaling of the manufacturing of all-inkjet-printed organic thin-film transistors: Device performance and manufacturing yield of transistor arrays. Organic Electronics, Vol. 30, p. 237.


    Stringer, Jonathan Althagathi, Talal M. Tse, Christopher C.W. Ta, Van Duong Shephard, Jonathan D. Esenturk, Emre Connaughton, Colm Wasley, Thomas J. Li, Ji Kay, Robert W. and Smith, Patrick J. 2016. Integration of additive manufacturing and inkjet printed electronics: a potential route to parts with embedded multifunctionality. Manufacturing Review, Vol. 3, p. 12.


    Tsangarides, Constantinos P. Ma, Hanbin and Nathan, Arokia 2016. ZnO nanowire array growth on precisely controlled patterns of inkjet-printed zinc acetate at low-temperatures. Nanoscale, Vol. 8, Issue. 22, p. 11760.


    Vafaei, Saeid Tuck, Christopher Ashcroft, Ian and Wildman, Ricky 2016. Surface microstructuring to modify wettability for 3D printing of nano-filled inks. Chemical Engineering Research and Design, Vol. 109, p. 414.


    Bao, Bin Jiang, Jieke Li, Fengyu Zhang, Pengchao Chen, Shuoran Yang, Qiang Wang, Shutao Su, Bin Jiang, Lei and Song, Yanlin 2015. Fabrication of Patterned Concave Microstructures by Inkjet Imprinting. Advanced Functional Materials, Vol. 25, Issue. 22, p. 3286.


    Bissannagari, Murali and Kim, Jihoon 2015. Inkjet printing of NiZn-ferrite films and their magnetic properties. Ceramics International, Vol. 41, Issue. 6, p. 8023.


    Derby, Brian 2015. Additive Manufacture of Ceramics Components by Inkjet Printing. Engineering, Vol. 1, Issue. 1, p. 113.


    Florian, C. Caballero-Lucas, F. Fernández-Pradas, J.M. Artigas, R. Ogier, S. Karnakis, D. and Serra, P. 2015. Conductive silver ink printing through the laser-induced forward transfer technique. Applied Surface Science, Vol. 336, p. 304.


    Guo, Yanglu Ono, Yutaro and Nagao, Yuki 2015. Modification for Uniform Surface of Nafion Ultrathin Film Deposited by Inkjet Printing. Langmuir, Vol. 31, Issue. 37, p. 10137.


    Hsiao, Wen-Kai and Betton, Eleanor S. 2015. Fundamentals of Inkjet Printing.


    Kwon, Young-Tae Lee, Young-In Lee, Kun-Jae Choi, Yo-Min and Choa, Yong-Ho 2015. A Novel Method for Fine Patterning by Piezoelectrically Induced Pressure Adjustment of Inkjet Printing. Journal of Electronic Materials, Vol. 44, Issue. 8, p. 2608.


    Matoba, Akinari Fukada, Kazuhiro Maeda, Yojiro Liu, Xi yun Nishioka, Kiyoshi Fujimoto, Nobutaka Suzuki, Masahiro Yonezawa, Yasuto Takagi, Shinji Inoue, Satoshi and Shimoda, Tatsuya 2015. P-5: Oxide Semiconductor/Polypropylene Carbonate Paste for A Thin-Film Transistor using Screen Printing. SID Symposium Digest of Technical Papers, Vol. 46, Issue. 1, p. 1135.


    Robin, Malo Kuai, Wenlin Amela-Cortes, Maria Cordier, Stéphane Molard, Yann Mohammed-Brahim, Tayeb Jacques, Emmanuel and Harnois, Maxime 2015. Epoxy Based Ink as Versatile Material for Inkjet-Printed Devices. ACS Applied Materials & Interfaces, Vol. 7, Issue. 39, p. 21975.


    Sowade, Enrico Blaudeck, Thomas and Baumann, Reinhard R. 2015. Inkjet Printing of Colloidal Nanospheres: Engineering the Evaporation-Driven Self-Assembly Process to Form Defined Layer Morphologies. Nanoscale Research Letters, Vol. 10, Issue. 1,


    ×
  • Journal of Fluid Mechanics, Volume 477
  • February 2003, pp. 175-200

The stability of ink-jet printed lines of liquid with zero receding contact angle on a homogeneous substrate

  • P. C. DUINEVELD (a1)
  • DOI: http://dx.doi.org/10.1017/S0022112002003117
  • Published online: 01 March 2003
Abstract

We have studied the stability of ink-jet printed lines of liquid with zero receding contact angle on a homogeneous substrate. Such lines can become unstable by forming a series of liquid bulges, at various wavelengths, connected by a ridge of liquid. The instability was studied with a simple dynamic model. It was shown that the line becomes unstable when the contact angle of the liquid with the substrate is larger than the advancing contact angle. This condition, however, is not a sufficient condition. When the transported flow rate is sufficiently small compared to the applied flow rate a printed line can be shown to be stable, i.e. the width of the printed line is constant. This was found to depend on the advancing contact angle of the liquid over the substrate.

Copyright
Recommend this journal

Email your librarian or administrator to recommend adding this journal to your organisation's collection.

Journal of Fluid Mechanics
  • ISSN: 0022-1120
  • EISSN: 1469-7645
  • URL: /core/journals/journal-of-fluid-mechanics
Please enter your name
Please enter a valid email address
Who would you like to send this to? *
×
MathJax