Skip to main content
×
Home
    • Aa
    • Aa

A method to obtain a Ragone plot for evaluation of carbon nanotube supercapacitor electrodes

  • Akshay S. Raut, Charles B. Parker and Jeffrey T. Glass (a1)
Abstract

Electrochemical double layer capacitors, also referred to as supercapacitors, are a promising technology in the field of energy storage. Carbon nanotube (CNT)-based supercapacitors are particularly interesting because of CNTs' high surface area and conductivity. CNT supercapacitors can potentially be used in hybrid electric vehicles due to their higher power density. Comparing energy storage systems that store energy in different ways, such as batteries, fuel cells, supercapacitors, and flywheels, requires that an appropriate set of performance data be collected. A Ragone plot is a log-log plot of a device's energy density versus power density, giving insight into its operational range. A method to obtain Ragone plots for CNT-based supercapacitors in a three-terminal electrochemical cell was adapted from a technique to test commercial capacitors for electric vehicles. Ragone plots for different types of as-grown CNT electrodes in different electrolytes are presented, along with the procedural details of this new method to obtain electrode-specific energy and power densities. Additionally, a theoretical weight calculation for a carbon nanotube film was derived and validated with a direct weight measurement of a CNT film. This weight was used in the specific energy and power densities for the Ragone plot.

Copyright
Corresponding author
a)Address all correspondence to this author. e-mail: akshay.raut@duke.edu
Linked references
Hide All

This list contains references from the content that can be linked to their source. For a full set of references and notes please see the PDF or HTML where available.

1.R.H. Baughman , A.A. Zakhidov , W.A. de Heer Carbon nanotubes—The route toward applications. Science 297, (5582) 787(2002)

2.T. Christen , M.W. Carlen Theory of Ragone plots. J. Power Sources 91, 210(2000)

3.D. Dunn-Rankin , E. Martins Leal , D.C. Walther Personal power systems. Prog. Energy Combust. Sci. 31, 422(2005)

4.T. Christen , C. Ohler Optimizing energy storage devices using Ragone plots. J. Power Sources 110, 107(2002)

5.J. Chmiola , G. Yushin , Y. Gogotsi , C. Portet , P. Simon , P.L. Taberna Anomalous increase in carbon capacitance at pore sizes less than 1 nanometer. Science 313, (5794) 1760(2006)

8.H. Cui , O. Zhou , B.R. Stoner Deposition of aligned bamboo-like carbon nanotubes via microwave plasma enhanced chemical vapor deposition. J. Appl. Phys. 88, 6072(2000)

9.I. Plitz , A. Dupasquier , F. Badway , J. Gural , N. Pereira , A. Gmitter , G.G. Amatucci The design of alternative nonaqueous high power chemistries. Appl. Phys. A 82, 615(2005)

10.A. Peigney , C. Laurent , E. Flahaut , R.R. Bacsa , A. Rousset Specific surface area of carbon nanotubes and bundles of carbon nanotubes. Carbon 39, 507(2001)

11.V.N. Popov Carbon nanotubes: Properties and application. Mater. Sci. Eng. 43, (3) 61(2004)

13.V.V.N. Obreja On the performance of supercapacitors with electrodes based on carbon nanotubes and carbon activated material—A review. Physica E 40, 2596(2008)

14.C. Ye , Z.M. Lin , S.Z. Hui Electrochemical and capacitance properties of rod-shaped MnO2 for supercapacitor. J. Electrochem. Soc. 152, (6) A1272(2005)

15.H. Chu , Q. Lai , Y. Hao , Y. Zhao , X. Xu Study of electrochemical properties and the charge/discharge mechanism for Li4Mn5O12/MnO2-AC hybrid supercapacitor. J. Appl. Electrochem. 39, (10) 2007(2009)

16.H-Y. Chu , Q-Y. Lai , L. Wang , J-F. Lu , Y. Zhao Preparation of MnO2/WMNT composite and MnO2/AB composite by redox deposition method and its comparative study as supercapacitive materials. Ionics 16, (3) 233(2009)

17.A.E. Fischer , M.P. Saunders , K.A. Pettigrew , D.R. Rolison , J.W. Long Electroless deposition of nanoscale MnO2 on ultraporous carbon nanoarchitectures: Correlation of evolving pore-solid structure and electrochemical performance. J. Electrochem. Soc. 155, (3) A246(2008)

Recommend this journal

Email your librarian or administrator to recommend adding this journal to your organisation's collection.

Journal of Materials Research
  • ISSN: 0884-2914
  • EISSN: 2044-5326
  • URL: /core/journals/journal-of-materials-research
Please enter your name
Please enter a valid email address
Who would you like to send this to? *
×

Keywords: