Skip to main content
×
Home
    • Aa
    • Aa

Bulk nanostructured materials by large strain extrusion machining

  • W. Moscoso (a1), M.R. Shankar (a2), J.B. Mann (a1), W.D. Compton (a1) and S. Chandrasekar (a1)...
Abstract

Large strain extrusion machining (LSEM) is presented as a method of severe plastic deformation for the creation of bulk nanostructured materials. This method combines inherent advantages afforded by large strain deformation in chip formation by machining, with simultaneous dimensional control of extrusion in a single step of deformation. Bulk nanostructured materials in the form of foils, plates, and bars of controlled dimensions are shown to result by appropriately controlling the geometric parameters of the deformation in large strain extrusion machining.

Copyright
Corresponding author
a) Address all correspondence to this author. e-mail: chandy@ecn.purdue.edu
Linked references
Hide All

This list contains references from the content that can be linked to their source. For a full set of references and notes please see the PDF or HTML where available.

1R.Z. Valiev , R.K. Islamgaliev , and I.V. Alexandrov : Bulk nanostructured materials from severe plastic deformation. Prog. Mater. Sci. 45, 103 (2000).

4F.J. Humphreys , P.B. Prangnell , J.R. Bowen , A. Gholinia , C. Harris , B. Hutchinson , M. Brown , J. Stowell , J. Gil Sevillano , and P.J. Withers : Developing stable fine-grain microstructures by large strain deformation. Philos. Trans. R. Soc. London, Ser. A 357, 1663 (1999).

6M.R. Shankar , S. Chandrasekar , A.H. King , and W.D. Compton : Microstructure and stability of nanocrystalline aluminum created by large strain machining. Acta Mater. 53, 4781 (2005).

7M.R. Shankar , B.C. Rao , S. Lee , S. Chandrasekar , A.H. King , and W.D. Compton : Severe plastic deformation (SPD) of titanium at near-ambient temperature. Acta Mater. 54, 3691 (2006).

8L. De Chiffre : Extrusion-cutting. International Journal of Machine Tool Design and Research 16, 137 (1976).

9L. De Chiffre : Extrusion-cutting of brass strips. International Journal of Machine Tool Design and Research 23, 141 (1983).

10S. Lee , J. Hwang , M. Ravi Shankar , S. Chandrasekar , and W. Dale Compton : Large strain deformation field in machining. Metall. Mater. Trans. A 37, 1633 (2006).

12F. Dalla Torre , R. Lapovok , J. Sandlin , P.F. Thomson , C.H.J. Davies , and E.V. Pereloma : Microstructures and properties of copper processed by equal channel angular extrusion for 1–16 passes. Acta Mater. 52, 4819 (2004).

14J.Y. Chang , J.S. Yoon , and G.H. Kim : Development of submicron sized grain during cyclic equal channel angular pressing. Scripta Mater. 45, 347 (2001).

Recommend this journal

Email your librarian or administrator to recommend adding this journal to your organisation's collection.

Journal of Materials Research
  • ISSN: 0884-2914
  • EISSN: 2044-5326
  • URL: /core/journals/journal-of-materials-research
Please enter your name
Please enter a valid email address
Who would you like to send this to? *
×

Keywords: