Hostname: page-component-8448b6f56d-jr42d Total loading time: 0 Render date: 2024-04-18T05:02:38.155Z Has data issue: false hasContentIssue false
  • English
  • Français

Investigation of the Crystallization Mechanisms in Indium Molybdenum Oxide Films by Vacuum Annealing

Published online by Cambridge University Press:  01 August 2005

Shi-Yao Sun ,
Jow-Lay Huang  and
Ding-Fwu Lii
Shi-Yao Sun
Affiliation:
Department of Materials Science and Engineering, National Cheng-Kung University, Tainan 701, Taiwan, Republic of China
Jow-Lay Huang*
Affiliation:
Department of Materials Science and Engineering, National Cheng-Kung University, Tainan 701, Taiwan, Republic of China
Ding-Fwu Lii
Affiliation:
Department of Electrical Engineering, Cheng Shiu University, Kaohsiung County 833, Taiwan, Republic of China
*
a) Address all correspondence to this author. e-mail: JLH888@mail.ncku.edu.tw
Get access

Abstract

The crystallization mechanisms for potentially high mobility molybdenum-indium-oxide (IMO) film were studied. The crystalline IMO films were deposited on unheated glass substrates via high-density plasma evaporation, and subsequent vacuum annealing was performed at 150, 200, and 250 °C for 30 min. The results of x-ray diffraction and x-ray photoelectron spectroscopy and electrical properties suggested that the room-temperature crystallization was induced from the highest compressive strain, caused by the charged clusters and oxygen vacancies. The highest mobility of 75.8 cm2/Vs obtained at 250 °C was due to the charged In–Mo+6–O clusters and strain relaxation with (222)/(440) orientation change.

Keywords

AnnealingPhysical vapor deposition (PVD)
Type
Articles
Information
Journal of Materials Research , Volume 20 , Issue 8 , August 2005 , pp. 2030 - 2037
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Granqvist, C.G. and Hultåker, A.: Transparent and conducting ITO films: New developments and applications. Thin Solid Films 411, 1 (2002).CrossRefGoogle Scholar
2Coutts, T.J., Young, D.L., Li, X. and Wu, X.: Search for improved transparent conducting oxides: A fundamental investigation of CdO, Cd2SnO4, and ZnSnO4. J. Vac. Sci. Technol., A 18, 2646 (2000).CrossRefGoogle Scholar
3Ginley, D.S. and Bright, C.: Transparent conducting oxides. MRS Bull. 25, 15 (2000).CrossRefGoogle Scholar
4Shigesato, Y., Takaki, S. and Haranoh, T.: Electrical and structural properties of low resistivity tin-doped indium oxide films. J. Appl. Phys. 71, 3356 (1992).CrossRefGoogle Scholar
5Oyama, T., Hashimoto, N., Shimizu, J., Akao, Y., Kojima, H., Alkawa, K. and Suzuki, K.: Low resistance indium tin oxide films on large scale glass substrate. J. Vac. Sci. Technol., A 10, 1682 (1992).CrossRefGoogle Scholar
6Song, P.K., Shigesato, Y., Kamei, M. and Yasui, I.: Electrical and structural properties of Tin-doped indium oxide films deposited by dc sputtering at room temperature. Jpn. J. Appl. Phys. Part 1 38, 2921 (1999).CrossRefGoogle Scholar
7Carcia, P.F., Mclean, R.S., Reilly, M.H., Li, Z.G., Pillione, L.J. and Messier, R.F.: Influence of energetic bombardment on stress, resistivity, and microstructure of indium tin oxide films grown by radio frequency magnetron sputtering on flexible polyester substrates. J. Vac. Sci. Technol., A 21, 745 (2003).CrossRefGoogle Scholar
8Craciun, V., Craciun, D., Chen, Z., Hwang, J. and Singh, R.K.: Room temperature growth of indium tin oxide thin films by ultraviolet-assisted pulsed laser deposition. Appl. Surf. Sci. 168, 118 (2000).CrossRefGoogle Scholar
9Minami, T., Kakumu, T., Takeda, Y. and Takata, S.: Highly transparent and conductive ZnO–In2O3 thin films prepared by dc magnetron sputtering. Thin Solid Films 290–291, 1 (1996).CrossRefGoogle Scholar
10Meng, Y., Yang, X.L., Chen, H.X., Shen, J., Jiang, Y.M., Zhang, Z.J. and Hua, Z.Y.: Molybdenum-doped indium oxide transparent conductive thin films. J. Vac. Sci. Technol., A 20, 288 (2002).CrossRefGoogle Scholar
11Meng, Y., Yang, X.L., Chen, H.X., Shen, J., Jiang, Y.M., Zhang, Z.J. and Hua, Z.Y.: A new transparent conductive thin film In2O3:Mo. Thin Solid Films 394, 219 (2001).CrossRefGoogle Scholar
12Yoshida, Y., Gessert, T.A., Perkins, C.L. and Coutts, T.J.: Development of radio-frequency magnetron sputtered indium molybdenum oxide. J. Vac. Sci. Technol., A 21, 1092 (2003).CrossRefGoogle Scholar
13Shigesato, Y., Yasui, I., Hayashi, Y., Takaki, S., Oyama, T. and Kamei, M.: Effects of water partial pressure on the activated electron beam evaporation process to deposit tin-doped indium-oxide films. J. Vac. Sci. Technol., A 13, 268 (1995).CrossRefGoogle Scholar
14Suzuki, K., Hashimoto, N., Oyama, T., Shimizu, J., Akao, Y. and Kojima, H.: Large scale and low resistance ITO films formed at high deposition rates. Thin Solid Films 226, 104 (1993).CrossRefGoogle Scholar
15Chapman, B.: Glow Discharge Processes-Sputtering and Plasma Etching (John Wiley & Sons, New York, 1980), Chap. 5.Google Scholar
16Cullity, B.D.: Elements of X-ray Diffraction, 2nd ed. (Addison-Wesley Publishing Company, Inc., 1978), pp. 363–367.Google Scholar
17Shigesato, Y. and Paine, D.C.: Study of the effect of Sn doping on the electronic transport properties of thin film indium oxide. Appl. Phys. Lett. 62, 1268 (1993).CrossRefGoogle Scholar
18Vink, T.J., Walrave, W., Daams, J.L.C., Baarslag, P.C. and van der Meerakker, J.E.A.M.: On the homogeneity of sputter-deposited ITO films Part I. Stress and microstructure. Thin Solid Films 266, 145 (1995).CrossRefGoogle Scholar
19Paine, D.C., Whitson, T., Janiac, D., Beresford, R., Yang, C.O. and Lewis, B.: A study of low temperature crystallization of amorphous thin film indium-tin-oxide. J. Appl. Phys. 85, 8445 (1999).CrossRefGoogle Scholar
20Sun, X.W., Huang, H.C. and Kwok, H.S.: On the initial growth of indium tin oxide on glass. Appl. Phys. Lett. 68, 2663 (1996).CrossRefGoogle Scholar
21Izumi, H., Adurodija, F.O., Kaneyoshi, T., Ishihara, T., Yoshioka, H. and Motoyama, M.: Electrical and structural properties of indium tin oxide films prepared by pulsed laser deposition. J. Appl. Phys. 91, 1213 (2002).CrossRefGoogle Scholar
22Enoki, H., Echigoya, J. and Suto, H.: The intermediate compound in the In2O3–SnO2 system. J. Mater. Sci. 26, 4110 (1991).CrossRefGoogle Scholar
23Liu, C., Matsutani, T., Asanuma, T., Murai, K., Kiuchi, M., Alves, E. and Reis, M.: Room-temperature growth of crystalline indium tin oxide films on glass using low-energy oxygen-ion-beam-assisted deposition. J. Appl. Phys. 93, 2262 (2003).CrossRefGoogle Scholar
24Gonzalez, G.B., Cohen, J.B., Hwang, J-H., Mason, T.O., Hodges, J.P. and Jorgensen, J.D.: Neutron diffraction study on the defect structure of indium–tin–oxide. J. Appl. Phys. 89, 2550 (2001).CrossRefGoogle Scholar
25Nelson, A.J. and Aharoni, H.: X-ray photoelectron spectroscopy investigation of ion beam sputtered indium tin oxide films as a function of oxygen pressure during deposition. J. Vac. Sci. Technol., A 5, 231 (1987).CrossRefGoogle Scholar
26Zhu, F., Huan, C.H.A., Zhang, K. and Wee, A.T.S.: Investigation of annealing effects on indium tin oxide thin films by electron energy loss spectroscopy. Thin Solid Films 359, 244 (2000).CrossRefGoogle Scholar
27Quass, M., Eggs, C. and Wulff, H.: Structural studies of ITO thin films with the Rietveld method. Thin Solid Films 332, 277 (1998).CrossRefGoogle Scholar
28Wang, Z. and Hu, X.: Structural and electrochemical characterization of ‘open-structured’ ITO films. Thin Solid Films 392, 22 (2001).CrossRefGoogle Scholar
29Ishida, T., Kobayashi, H. and Nakato, Y.: Structures and properties of electron-beam-evaporated indium tin oxide films as studied by x-ray photoelectron spectroscopy and work-function measurements. J. Appl. Phys. 73, 4344 (1993).CrossRefGoogle Scholar
30Mergel, D. and Qiao, Z.: Correlation of lattice distortion with optical and electrical properties of In2O3:Sn films. J. Appl. Phys. 95, 5608 (2004).CrossRefGoogle Scholar
31Klug, H.P. and Alexander, L.E.: X-ray Diffraction Procedures for Polycrystalline and Amorphous Materials, 2nd ed. (Wiley, New York, 1974), Chap. 9.Google Scholar
32Sun, S.Y., Huang, J.L. and Lii, D.F.: Effects of oxygen contents on the electrical and optical properties of indium molybdenum oxide films fabricated by high density plasma evaporation. J. Vac. Sci. Technol., A 22, 1235 (2004).CrossRefGoogle Scholar
33Freeman, A.J., Poeppelmeier, K.R., Mason, T.O., Chang, R.P.H. and Marks, T.J.: Chemical and thin film strategies for new transparent conducting oxides. MRS Bull. 25, 45 (2000).CrossRefGoogle Scholar
34Shigesato, Y., Hayashi, Y. and Haranoh, T.: Doping mechanisms of tin-doped indium oxide films. Appl. Phys. Lett. 61, 73 (1992).CrossRefGoogle Scholar
35Kamei, M., Enomoto, H. and Yasui, I.: Origin of the crystalline orientation dependence of the electrical properties in tin-doped indium oxide films. Thin Solid Films 392, 265 (2001).CrossRefGoogle Scholar