Bassim, N.D., De Gregorio, B.T., Kilcoyne, A.L.D., Scott, K., Chou, T., Wirick, S., Cody, G. & Stroud, R.M. (2012). Minimizing damage during FIB sample preparation of soft materials: FIB sample preparation of soft materials. J Microsc
245, 288–301.
Boelen, B., den Hartog, H. & van der Weijde, H. (2004). Product performance of polymer coated packaging steel, study of the mechanism of defect growth in cans. Prog Org Coatings
50, 40–46.
Callister, W.D. (2007). Materials Science and Engineering: An Introduction, 7th ed.
New York, USA: John Wiley and Sons Inc.
Faber, E.T., Vellinga, W.P. & De Hosson, J.T.M. (2014). Local delamination on heavily deformed polymer–metal interfaces: Evidence from microscopy. J Mater Sci
49, 691–700.
Fragala, M.E., Compagnini, G., Torrisi, L. & Puglisi, O. (1998). Ion beam assisted unzipping of PMMA. Nucl Instrum Methods Phys Res B
141, 169–173.
Kim, S., Jeong Park, M., Balsara, N.P., Liu, G. & Minor, A.M. (2011). Minimization of focused ion beam damage in nanostructured polymer thin films. Ultramicroscopy
111, 191–199.
Lee, C.C., Alici, G., Spinks, G.M., Proust, G. & Cairney, J.M. (2011). Micron-scale polymer–metal cantilever actuators fabricated by focused ion beam. Sens Actuators A Phys
172, 462–470.
Lee, C.C., Proust, G., Alici, G., Spinks, G.M. & Cairney, J.M. (2012). Three-dimensional nanofabrication of polystyrene by focused ion beam: Nanofabrication of polystyrene by FIB. J Microsc
248, 129–139.
Lee, E.H. (1999). Ion-beam modification of polymeric materials – Fundamental principles and applications. Nucl Instrum Methods Phys Res B
151, 29–41.
Mahoney, C.M., Fahey, A.J., Gillen, G., Xu, C. & Batteas, J.D. (2006). Temperature-controlled depth profiling in polymeric materials using cluster secondary ion mass spectrometry (SIMS). Appl Surf Sci
252, 6502–6505.
Mayer, J., Giannuzzi, L.A., Kamino, T. & Michael, J. (2007). Tem sample preparation and FIB-induced damage. MRS Bull
32, 400–407.
Nugroho, P., Mitomo, H., Yoshii, F. & Kume, T. (2001). Degradation of poly (L-lactic acid) by γ-irradiation. Polym Degrad Stab
72, 337–343.
Oshima, A., Okubo, S., Oyama, T.G., Washio, M. & Tagawa, S. (2012). Nano- and micro-fabrications of polystyrene having atactic and syndiotactic structures using focused ion beams lithography. Radiat Phys Chem
81, 584–588.
Oyama, T.G., Hinata, T., Nagasawa, N., Oshima, A., Washio, M., Tagawa, S. & Taguchi, M. (2013). Micro/nanofabrication of poly(L-lactic acid) using focused ion beam direct etching. Appl Phys Lett
103, 163105.
Rastogi, R. (2003). Aspects of Plastic Deformation of PET/Steel Laminates. Eindhoven: TUE.
Rivera, F., Davis, R. & Vanfleet, R. (2013). Alternative FIB TEM sample preparation method for cross-sections of thin metal films deposited on polymer substrates. Microsc Microanal
19, 1080–1091.
Schmied, R., Chernev, B., Trimmel, G. & Plank, H. (2012). New possibilities for soft matter applications: Eliminating technically induced thermal stress during FIB processing. RSC Adv
2, 6932.
Sezen, M., Plank, H., Fisslthaler, E., Chernev, B., Zankel, A., Tchernychova, E., Blümel, A., List, E.J.W., Grogger, W. & Pölt, P. (2011). An investigation on focused electron/ion beam induced degradation mechanisms of conjugated polymers. Phys Chem Chem Phys
13, 20235–20240.
Strobl, G. (1997).
The Physics
of Polymers
, 2nd ed.
Heidelberg: Springer.
Van Tijum, R., Vellinga, W.P. & De Hosson, J.T.M. (2007). Surface roughening of metal–polymer systems during plastic deformation. Acta Mater
55, 2757–2764.
Ziegler, J.F. (2014). Stopping Range of Ions in Matter (software). Available at www.srim.org (retrieved May 6, 2014).
Ziegler, J.F., Biersack, J.P. & Ziegler, M.D. (2008). SRIM, The Stopping and Range of Ions in Matter. IBM-Research, Yorktown, USA: Lulu.com.
