Skip to main content
×
Home
    • Aa
    • Aa

3D printing for regenerative medicine: From bench to bedside

  • Juan Li (a1), Ling He (a2), Chen Zhou (a3), Yue Zhou (a4), Yanying Bai (a5), Francis Y. Lee (a6) and Jeremy J. Mao (a7)...
Abstract
Abstract

Organ shortage is a severe challenge worldwide. Three-dimensional (3D) printing, a rapidly developing engineering and materials science tool, holds considerable promise in generating implantable organ scaffolds that may reduce or eliminate organ shortage. However, translation of 3D printing into clinical therapies has been astonishingly slow and certainly has not matched the pace of technology development. This review outlines challenges and opportunities for the application of 3D printing in tissue and organ regeneration, with emphasis on in vivo applications of 3D-printed scaffolds. Three-dimensional-printed scaffolds for the regeneration of complex tissues and organs, including bone, cartilage, tooth, and skin, serve as prototypes for 3D printing of other tissues and organs such as the liver, kidney, or heart. The aspiration to reduce or eliminate organ shortage appears to hinge on the translation of 3D bioprinting technologies into preclinical studies and clinical trials. The remaining challenges of cell survival, directed differentiation, angiogenesis, and metabolic exchange are far from trial and need to be addressed. Three-dimensional-printed materials will remain a biomaterials and engineering showcase unless applications in preclinical and clinical models are realized. In balance, 3D printing holds considerable promise in regenerative medicine as a unique approach to address organ shortage.

Copyright
Linked references
Hide All

This list contains references from the content that can be linked to their source. For a full set of references and notes please see the PDF or HTML where available.

B. Derby , Science 338, 921 (2012).

S.F. Badylak , D.J. Weiss , A. Caplan , P. Macchiarini , Lancet 379, 943 (2012).

F. Xu , J. Celli , I. Rizvi , S. Moon , T. Hasan , U. Demirci , J. Biotechnol. 6, 204 (2011).

X. Wang , Y. Yan , R. Zhang , Tissue Eng. Part B 16, 189 (2010).

M. Layani , P. Darmawan , W.L. Foo , L. Liu , A. Kamyshny , D. Mandler , S. Magdassi , P.S. Lee , Nanoscale 6, 4572 (2014).

B. Guillotin , A. Souquet , S. Catros , M. Duocastella , B. Pippenger , S. Bellance , R. Bareille , M. Remy , L. Bordenave , J. Amedee , F. Guillemot , Biomaterials 31, 7250 (2010).

U. Demirci , G. Montesano , Lab Chip 7, 1428 (2007).

Y.S. Song , D. Adler , F. Xu , E. Kayaalp , A. Nureddin , R.M. Anchan , R.L. Maas , U. Demirci , Proc. Natl. Acad. Sci. U.S.A. 107, 1074596 (2010).

D. Liu , J. Zhuang , C. Shuai , S. Peng , Biofabrication 5, 025005 (2013).

Y.Q. Pan , R. Zheng , F.B. Liu , W. Jing , C. Yong , X.Y. Liang , W. Bing , Int. J. Surg. 12, 71 (2014).

V. Mironov , T. Boland , T. Trusk , G. Forgacs , R.R. Markwald , Trends Biotechnol. 21, 157 (2003).

Y.J. Seol , H.W. Kang , S.J. Lee , A. Atala , J.J. Yoo , Eur. J. Cardiothorac. Surg. 46, 342 (2014).

F. Guillemot , V. Mironov , M. Nakamura , Biofabrication 2, 010201 (2010).

E.T. Pashuck , M.M. Stevens , Sci. Transl. Med. 4, 160sr4 (2012).

M. Castilho , M. Dias , E. Vorndran , U. Gbureck , P. Fernandes , I. Pires , B. Gouveia , H. Armes , E. Pires , J. Rodrigues , Biofabrication 6, 025005 (2014).

N.E. Fedorovich , J. Alblas , W.E. Hennink , F.C. Oner , W.J. Dhert , Trends Biotechnol. 29, 601 (2011).

F. Tamimi , J. Torres , K. Al-Abedalla , E. Lopez-Cabarcos , M.H. Alkhraisat , D.C. Bassett , U. Gbureck , J.E. Barralet , Biomaterials 35, 5436 (2014).

J.W. Lee , K.S. Kang , S.H. Lee , J.Y. Kim , B.K. Lee , D.W. Cho , Biomaterials 32, 744 (2011).

J.H. Shim , S.E. Kim , J.Y. Park , J. Kundu , S.W. Kim , S.S. Kang , D.W. Cho , Tissue Eng. Part A 20, 1980 (2014).

M.T. Poldervaart , H. Wang , J. van der Stok , H. Weinans , S.C. Leeuwenburgh , F.C. Oner , W.J. Dhert , J. Alblas , PLoS One 8, e72610 (2013).

M.T. Poldervaart , H. Gremmels , K. van Deventer , J.O. Fledderus , F.C. Oner , M.C. Verhaar , W.J. Dhert , J. Alblas , J. Control. Release 184, 58 (2014).

Y.J. Seol , J.Y. Park , J.W. Jung , J. Jang , R. Girdhari , S.W. Kim , D.W. Cho , Tissue Eng. Part A (2014), doi: 10.1089/ten.tea.2012.0726.

G. Fielding , S. Bose , Acta. Biomater. 9, 9137 (2013).

S. Tarafder , N.M. Davies , A. Bandyopadhyay , S. Bose , Biomater. Sci. 1, 1250 (2013).

J. Jensen , J.H. Rolfing , D.Q. Svend Le , A.A. Kristiansen , J.V. Nygaard , L.B. Hokland , M. Bendtsen , M. Kassem , H. Lysdahl , C.E. Bunger , J. Biomed. Mater. Res. A 102, 2993 (2014).

H. Seyednejad , D. Gawlitta , R.V. Kuiper , A. de Bruin , C.F. van Nostrum , T. Vermonden , W.J. Dhert , W.E. Hennink , Biomaterials 33, 4309 (2012).

L.G. Sicchieri , G.E. Crippa , P.T. de Oliveira , M.M. Beloti , A.L. Rosa , J. Tissue Eng. Regen. Med. 6, 155 (2012).

S. Tarafder , V.K. Balla , N.M. Davies , A, J. Tissue Eng. Regen. Med. 7, 631 (2013).

Z. Zhou , F. Buchanan , C. Mitchell , N. Dunne , Mater. Sci. Eng. C 38, 1 (2014).

J.A. Inzana , D. Olvera , S.M. Fuller , J.P. Kelly , O.A. Graeve , E.M. Schwarz , S.L. Kates , H.A. Awad , Biomaterials 35, 4026 (2014).

J.J. Mao , M.S. Stosich , E.K. Moioli , C.H. Lee , S.Y. Fu , B. Bastian , S.B. Eisig , C. Zemnick , J. Ascherman , J. Wu , C. Rohde , J. Ahn , Tissue Eng. Part B 16, 257 (2010).

J.P. Temple , D.L. Hutton , B.P. Hung , P.Y. Huri , C.A. Cook , R. Kondragunta , X. Jia , W.L. Grayson , J. Biomed. Mater. Res. A (2014), doi: 10.1002/jbm.a.35107.

N.E. Fedorovich , H.M. Wijnberg , W.J. Dhert , J. Alblas , Tissue Eng. Part A 17, 2113 (2011).

C. Weinand , R. Gupta , E. Weinberg , I. Madisch , C.M. Neville , J.B. Jupiter , J.P. Vacanti , Tissue Eng. Part A 15, 2605 (2009).

V. Keriquel , F. Guillemot , I. Arnault , B. Guillotin , S. Miraux , J. Amedee , J.C. Fricain , S. Catros , Biofabrication 2, 014101 (2010).

C.H. Lee , J.L. Cook , A. Mendelson , E.K. Moioli , H. Yao , J.J. Mao , Lancet 376, 440 (2010).

T. Xu , K.W. Binder , M.Z. Albanna , D. Dice , W. Zhao , J.J. Yoo , A. Atala , Biofabrication 5, 015001 (2013).

X. Cui , K. Breitenkamp , M.G. Finn , M. Lotz , D.D. D’Lima , Tissue Eng. Part A 18, 1304 (2012).

C.H. Lee , N.W. Marion , S. Hollister , J.J. Mao , Tissue Eng. Part A 15, 3923 (2009).

N.E. Fedorovich , W. Schuurman , H.M. Wijnberg , H.J. Prins , P.R. van Weeren , J. Malda , J. Alblas , W.J. Dhert , Tissue Eng. Part C 18, 33 (2012).

A. Mendelson , E. Frank , C. Allred , E. Jones , M. Chen , W. Zhao , J.J. Mao , FASEB J. 25, 3496 (2011).

K. Kim , C.H. Lee , B.K. Kim , J.J. Mao , J. Dent. Res. 89, 842 (2010).

J.Y. Kim , X. Xin , E.K. Moioli , J. Chung , C.H. Lee , M. Chen , S.Y. Fu , P.D. Koch , J.J. Mao , Tissue Eng. Part A 16, 3023 (2010).

C.H. Park , H.F. Rios , Q. Jin , M.E. Bland , C.L. Flanagan , S.J. Hollister , W.V. Giannobile , Biomaterials 31, 5945 (2010).

C.H. Park , H.F. Rios , A.D. Taut , M. Padial-Molina , C.L. Flanagan , S.P. Pilipchuk , S.J. Hollister , W.V. Giannobile , Tissue Eng. Part C 20, 533 (2014).

C.H. Lee , J. Hajibandeh , T. Suzuki , A. Fan , P. Shang , J.J. Mao , Tissue Eng. Part A 20, 1342 (2014).

F. Groeber , M. Holeiter , M. Hampel , S. Hinderer , K. Schenke-Layland , Clin. Plast. Surg. 39, 33 (2012).

, , , , , , , , , (). W. Lee J.C. Debasitis V.K. Lee J.H. Lee K. Fischer K. Edminster J.K. Park S.S. Yoo Biomaterials 30 15872009

V. Lee , G. Singh , J.P. Trasatti , C. Bjornsson , X. Xu , T.N. Tran , S.S. Yoo , G. Dai , P. Karande , Tissue Eng. Part C 20, 473 (2014).

L. Koch , A. Deiwick , S. Schlie , S. Michael , M. Gruene , V. Coger , D. Zychlinski , A. Schambach , K. Reimers , P.M. Vogt , B. Chichkov , Biotechnol. Bioeng. 109, 1855 (2012).

D.P. Orgill , N. Engl. J. Med. 360, 893 (2009).

A.D. Metcalfe , M.W. Ferguson , J. R. Soc. Interface 4, 413 (2007).

S. MacNeil , Nature 445, 874 (2007).

J. Killat , K. Reimers , C.Y. Choi , S. Jahn , P.M. Vogt , C. Radtke , Int. J. Mol. Sci. 14, 14460 (2013).

A. Skardal , D. Mack , E. Kapetanovic , A. Atala , J.D. Jackson , J. Yoo , S. Soker , Stem Cells Transl. Med. 1, 792 (2012).

S. Michael , H. Sorg , C.T. Peck , L. Koch , A. Deiwick , B. Chichkov , P.M. Vogt , K. Reimers , PLoS One 8, e57741 (2013).

J.F. Burke , I.V. Yannas , W.C. Quinby Jr., C.C. Bondoc , W.K. Jung , Ann. Surg. 194, 413 (1981).

I.V. Yannas , J.F. Burke , D.P. Orgill , E.M. Skrabut , Science 215, 174 (1982).

Y. Kitagawa , Y. Naganuma , Y. Yajima , M. Yamada , M. Seki , Biofabrication 6, 035011 (2014).

X. Li , J. He , W. Bian , Z. Li , D. Li , J.G. Snedeker , Biofabrication 6, 015010 (2014).

, , , , , (). R. Yao R. Zhang F. Lin J. Luan Biofabrication 4 0450032012

J.H. Park , J.W. Jung , H.W. Kang , Y.H. Joo , J.S. Lee , D.W. Cho , Biofabrication 4, 035004 (2012).

J.W. Chang , S.A. Park , J.K. Park , J.W. Choi , Y.S. Kim , Y.S. Shin , C.H. Kim , Artif. Organs 38, E95 (2014).

R. Gaebel , N. Ma , J. Liu , J. Guan , L. Koch , C. Klopsch , M. Gruene , A. Toelk , W. Wang , P. Mark , F. Wang , B. Chichkov , W. Li , G. Steinhoff , Biomaterials 32, 9218 (2011).

L. Zieber , S. Or , E. Ruvinov , S. Cohen , Biofabrication 6, 024102 (2014).

T. Xu , W. Zhao , J.M. Zhu , M.Z. Albanna , J.J. Yoo , A. Atala , Biomaterials 34, 130 (2013).

, , , , , , , , , , (). H.J. Choi J.M. Kim E. Kwon J.H. Che J.I. Lee S.R. Cho S.K. Kang J.C. Ra B.C. Kang J. Korean Med. Sci. 26 4822011

C.H. Park , H.F. Rios , Q. Jin , J.V. Sugai , M. Padial-Molina , A.D. Taut , C.L. Flanagan , S.J. Hollister , W.V. Giannobile , Biomaterials 33, 137 (2012).

D. Seliktar , D. Dikovsky , E. Napadensky , Israel J. Chem. 53, 795 (2013).

E.C. Novosel , C. Kleinhans , P.J. Kluger , Adv. Drug Deliv. Rev. 63, 300 (2011).

V. Mironov , N. Reis , B. Derby , Tissue Eng. 12, 631 (2006).

B.A. Dababneh , T.O. Ibrahim , J. Manuf. Sci. Eng. 136, 061016 (2014).

Recommend this journal

Email your librarian or administrator to recommend adding this journal to your organisation's collection.

MRS Bulletin
  • ISSN: 0883-7694
  • EISSN: 1938-1425
  • URL: /core/journals/mrs-bulletin
Please enter your name
Please enter a valid email address
Who would you like to send this to? *
×

Keywords:

Metrics

Altmetric attention score

Full text views

Total number of HTML views: 39
Total number of PDF views: 225 *
Loading metrics...

Abstract views

Total abstract views: 842 *
Loading metrics...

* Views captured on Cambridge Core between September 2016 - 28th June 2017. This data will be updated every 24 hours.