The high cost of single-crystal III–V substrates limits the use of gallium arsenide (GaAs) and related sphalerite III–V materials in many applications, especially photovoltaics. However, by making devices from epitaxially grown III–V layers that are separated from a growth substrate, one can recycle the growth substrate to reduce costs. Here, we show damage-free removal of an epitaxial single-crystal GaAs film from its GaAs growth substrate using a laser that is absorbed by a smaller band gap, pseudomorphic indium gallium arsenide nitride layer grown between the substrate and the GaAs film. The liftoff process transfers the GaAs film to a flexible polymer substrate, and the transferred GaAs layer is indistinguishable in structural quality from its growth substrate.

We present a novel soft-nanoimprint procedure to fabricate high-quality sub-wavelength hole arrays in optically thick films of gold on glass substrates. We fabricate 0.5 × 0.5 mm2 structures composed of a square array of 180 nm-diameter holes with a 780 nm pitch. Optical angular transmission measurements on the arrays show clear extraordinary transmission peaks corresponding to the dispersion of surface plasmon polaritons propagating on either side of the metal film. The transmission features can be strongly controlled by engineering the dielectric environment around the holes. As the nanoimprint procedure enables fabrication of nanoscale patterns over wafer-scale areas at low cost, these imprinted metal nanoparticle arrays can find applications in, e.g., optical components, photovoltaics, integrated optics, and microfluidics.

Poly[sulfur-random-1,3-diisopropenylbenzene (DIB)] copolymers synthesized via inverse vulcanization form electrochemically active polymers used as cathodes for high-energy density Li–S batteries, capable of enhanced capacity retention (1005 mAh/g at 100 cycles) and lifetimes of over 500 cycles. In this prospective, we demonstrate how analytical electron microscopy can be employed as a powerful tool to explore the origins of the enhanced capacity retention. We analyze morphological and compositional features when the copolymers, with DIB contents up to 50% by mass, are blended with carbon nanoparticles. Replacing the elemental sulfur with the copolymers improves the compatibility and interfacial contact between active sulfur compounds and conductive carbons. There also appears to be improvements of the cathode mechanical stability that leads to less cracking but preserving porosity. This compatibilization scheme through stabilized organosulfur copolymers represents an alternative strategy to the nanoscale encapsulation schemes which are often used to improve the cycle life in high-energy density Li–S batteries.

Photonic crystal nanolasers are fabricated and operated simply, and can be applied as disposable sensors for biomedical applications. They are sensitive to the change with environmental index and surface charge. Functionalizing the nanolaser surface with an antibody, the specific binding of target antigen is detected with a detection limit 2–4 orders lower than that achieved by current standard methods, enzyme-linked immuno-sorbent assay. Nanolasers also detect negatively-charged deoxyribonucleic acid from their emission intensity. This technique requires neither labels nor spectroscopy, which simplifies screening procedures. Its applicability for high-speed detection of endotoxin and for label-fee imaging of living cells are also demonstrated.

The introduction of functional units onto semiconducting polymers either as side chains or at the α- and ω-ends of polymeric chains is the method of choice in order to impose additional functions to the final semiconducting materials when aiming specific applications. Moreover, the functionalization approach provides a route to further complex macromolecular architectures as well as the generation of hybrid materials through the covalent attachment of the semiconductor to carbon nanostructures or to inorganic nanoparticles. Via this prospective an outline over functionalized and hybrid semiconducting polymers is provided along with possible paths of future research toward functional and hybrid semiconductors.

High-aspect-ratio (HAR) pillar arrays offer large surface area, well-defined surface topography, and large mechanical compliance. In this Prospective, we showcase micro- and nanopillar array systems that exploit the responsiveness and/or harness the mechanical instabilities for myriad surface-mediated applications, including tunable wetting, adhesion, optical properties, and actuation. In each application, we start with biological examples with HAR pillar structures, and discuss strategies to fabricate responsive HAR polymer pillar structures. We then discuss approaches to tune the surface topography, such as via bending, tilting, expansion or contraction, and collapsing of the pillars, and the resulting change of surface and optical properties, and their dynamic actuation. In each system, we discuss the controllability and recoverability of pillar deformation.

Hybrid inorganic–organic perovskites have emerged over the last 5 years as a promising class of materials for optoelectronic applications. Most notably, their solar cells have achieved power conversion efficiencies above 20% in an unprecedented timeframe; however, many fundamental questions still remain about these materials. This Prospective Article reviews the procedures used to deposit hybrid perovskites and describes the resulting crystallographic and morphological structures. It further details the electrical and optical properties of perovskites and then concludes by highlighting a number of potential applications and the materials challenges that must be overcome before they can be realized.

Improvement of both solution and vapor-phase synthetic techniques for nanoscale ferroelectrics has fueled progress in fundamental understanding of the polar phase at reduced dimensions, and this physical insight has pushed the boundaries of ferroelectric phase stability and polarization switching to sub-10 nm dimensions. The development and characterization of new ferroelectric nanomaterials has opened new avenues toward future nonvolatile memories, devices for energy storage and conversion, biosensors, and many other applications. This prospective will highlight recent progress on the synthesis, fundamental understanding, and applications of zero- and one-dimensional ferroelectric nanomaterials and propose new directions for future study in all three areas.

As multifunctional electroactive materials, ferroelectric polymers are unique owing to their exceptionally high dielectric strength (>600 MV/m), high flexibility, and easy and low-temperature fabrication into required shapes. Although polyvinylidene difluoride (PVDF)-based ferroelectric polymers have been known for several decades, recent findings reveal the potential of this class of electroactive polymers (EAPs) to achieve giant electroactive responses by tuning the molecular, nano, and meso-structures. This paper presents these advances, including giant electrocaloric effect, giant electroactuation, and large, hysteresis-free polarization response. New developments in materials benefit applications, such as environmentally benign and potentially highly energy-efficient electrical field controlled solid-state refrigeration, artificial muscles, and high-energy and power density electric energy storage devices. The challenges in developing these materials to realize these applications, and strategies to further improve the responses of EAPs will be also discussed.

Metatronics, or metamaterial-inspired optical nanocircuitry, has provided a powerful toolset to tailor and implement modular quasi-static circuit functionalities in the optical regime. So far, these concepts have been mostly limited to linear operations, while many of the relevant operations in integrated circuits require nonlinear responses. In this work, we introduce nonlinear infrared nanocircuit elements exploiting large quantum conductance driven by photon-assisted tunneling and enhanced by hybrid plasmonic nanojunctions. Based on these concepts, we present infrared lumped nanocircuit mixers and switches for second-harmonic generation, and wide-spectrum self-amplitude modulators based on nanorods.

Electronic performance in semiconducting polymers has improved dramatically in recent years owing to a host of novel materials and processing techniques. Our understanding of the factors governing charge transport in these materials has also been enhanced through advancements in both experimental and computational techniques, with disorder appearing to play a central role. In this prospective, we propose that disorder is an inextricable aspect of polymer morphology which need not be highly detrimental to charge transport if it is embraced and planned for. We discuss emerging guidelines for the synthesis of polymers which are resilient to disorder and present our vision for how future advances in processing and molecular design will provide a path toward further increases in charge-carrier mobility.

Solution-processed hole contact layers (HCLs) of metal oxide nanoparticle (NP) films improve performance of organic photovoltaics (OPVs), but have thus far required harsh post-deposition thermal or plasma treatments. Here, we describe a general method to synthesize suspensions of ultrasmall (1–2 nm) MoO3, WO3, NiOx, and CoOx NPs in n-butanol. Spin-coated metal oxide NP films with no post-deposition treatment exhibit high work function and ionization energy consistent with the oxidation states of the metal cations. Metal oxide NP HCLs demonstrate performance matching those of reference conventional and inverted OPVs containing PEDOT:PSS and evaporated MoO3.

Conjugated polymers are being considered for use at the interface between hard inorganic metallic and semiconducting electrodes and soft biological tissues. These organic materials have properties that are intermediate to these two extremes, and their chemistry, structure, and performance can be precisely manipulated over a large range. Examples of current interest included copolymers of poly(3,4-ethylene dioxythiophene) and poly(3,4-propylene dioxythiophene). This paper will review past efforts, recent activities, and future possibilities in this rapidly expanding area of materials research and technology.

Polymer-based nanomaterials have captured increasing interest over the past decades for their promising use in a wide variety of applications including photovoltaics, catalysis, optics, and energy storage. Bottom-up assembly engineering based on the self- and directed-assembly of polymer-based building blocks has been considered a powerful means to robustly fabricate and efficiently manipulate target nanostructures. Here, we give a brief review of the recent advances in assembly and reconfigurability of polymer-based nanostructures. We also highlight the role of computer simulation in discovering the fundamental principles of assembly science and providing critical design tools for assembly engineering of complex nanostructured materials.

In this work, photonic crystals of plasmonic/excitonic semiconductor nanocrystals (NCs) were assembled from non-thermal plasma-synthesized boron (B)-doped silicon (Si) NCs. The photonic crystals form an inverse opal structure with larger refractive index than the conventional crystals made from silica nanoparticles and are aimed at controlling light propagation via excitonic and plasmonic absorption of the B-doped Si NC as well as the photonic band gap of the photonic crystal. Furthermore, we demonstrate self-assembly of mesoscopic photonic crystal particles consisting of B-doped Si NCs with well-defined inverse opal structure via simple aerosol processing.

Described is a simple one-pot route for the synthesis of hierarchically porous carbon supported palladium (Pd/C) monoliths with a three-dimensional pore network via self-assembly under basic conditions of a resol polymer. Textural and morphological characterization of the Pd/C monoliths was carried out using nitrogen sorption analysis and scanning electron microscope. Formation of Pd nanoparticles ranging from 35 to 60 nm was observed. Evaluation of catalytic activity for styrene hydrogenation was performed using the Pd/C material as heterogeneous catalyst in batch mode. Studies revealed that the monoliths showed leaching and catalytic activity similar to a commercial Pd/C catalyst.

The chemical diversity of organic semiconductors coupled with the kinetic nature of film formation make it challenging to tune the structure of active-layer thin films in organic electronics across multiple length scales. We review techniques to tune aspects of film structure within a framework that accounts for the competition between the time available for structural development and the time required by the organic semiconductors to order, defined by a dimensionless time, τ, that describes the ratio of these two quantities. By considering these two competing time scales, we propose general guidelines to tune the film structure accordingly.

Optoplasmonic networks consisting of dielectric microsphere resonators and plasmonic nanoantennas in a morphologically well-defined on-chip platform support unique electromagnetic signatures that are hybrids of photonic whispering gallery modes and localized surface plasmon resonances. Here we explore the dependence of their near- and far-field responses on the key structural parameters, including the size of the gold nanoparticles forming the plasmonic elements, the separation between the microspheres, and the geometry of the chain. The high degree of structural flexibility, which is experimentally accessible through template guided self-assembly approaches, makes these optoplasmonic structures a unique electromagnetic material for tuning spectral shapes and intensities.

The design of π-conjugated molecules and polymers has driven the increase in efficiency of bulk heterojunction organic photovoltaic devices from <1% to over 12%. The pathways to generation of free charge carriers are still being uncovered. By focusing on blends of conjugated polymers with fullerenes, recent work has highlighted the impact of the design of donor–acceptor polymers on optoelectronic properties and phase-separated morphologies. This morphology of the active layer is largely controlled by processing conditions, such as use of processing additives. Developing a deep understanding of the impact of polymer chemistry and processing at the laboratory scale is key to translating the technology of organic photovoltaics from the research scale to large-area modules.