Hostname: page-component-7c8c6479df-ph5wq Total loading time: 0 Render date: 2024-03-29T12:11:53.720Z Has data issue: false hasContentIssue false

The Characterization and Conservation of Aged Aluminum Alloys: Buckminster Fuller's Dymaxion House

Published online by Cambridge University Press:  21 March 2011

Karen A. Trentelman
Affiliation:
Detroit Institute of Arts, 5200 Woodward Avenue, Detroit MI 48202
James Ashby
Affiliation:
Henry Ford Museum & Greenfield Village, 20900 Oakwood Blvd., Dearborn MI 48121
William T. Donlon
Affiliation:
Ford Motor Company, Scientific Research Laboratory, MD 3182, Dearborn MI 48121-2053
Get access

Abstract

The Dymaxion House is a unique historic dwelling structure designed by Buckminster Fuller. Built in the 1940s, the house was constructed of modern materials, most notably aluminum, which formed the walls, roof and many of the structural elements. The challenge faced in reconstructing the Dymaxion House at Henry Ford Museum & Greenfield Village was to preserve the original structure as much as possible while simultaneously accommodating the needs of exhibition (i.e. to restore the visual appearance and ensure sufficient structural integrity to allow the entrance of visitors). The primary aluminum alloys used in the house are equivalent to the modern alloy designations 2014 and 2024; both extruded forms and Alclad sheets were used. The alloy composition, age-hardening characteristics, cladding layers, grain structure and corrosion products of the aged aluminum components of the Dymaxion House have been studied. The results of these studies were used in consultation with conservators, engineers and corrosion scientists to determine the most appropriate course of treatment.

Type
Research Article
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Overland, C.W., “The Dymaxion Dwelling Machine: R. Buckminster Fuller's Dream of Mass Produced Housing,” M.A. Thesis State University of New York at Oneonta, 1998.Google Scholar
2. Lyman, T. Metals Handbook (The American Society for Metals, Cleveland, Ohio, 1948).Google Scholar
3. Lyman, T. Metals Handbook, 8th ed. (American Society for Metals, Novelty, Ohio, 1961).Google Scholar
4. Archer, R.S. in The Aluminum Industry: Aluminum Products and Their Fabrication, edited by Edwards, J.D. Frary, F.C. and Jeffries, Z. (McGraw-Hill, New York, 1930), pp. 192272.Google Scholar
5. Teed, P.L. Duralumin and its Heat-Treatment (Charles Griffin & Company, London, 1937).Google Scholar
6. Hunsicker, H.Y. in Aluminum, Properties and Physical Metallurgy, edited by Hatch, J.E. (American Society for Metals, Metals Park, OH, 1984), pp. 134199.Google Scholar
7. Hutchinson, C.R. and Ringer, S.P. Metallurgical and Materials Transactions A 31A, 27212733 (2000).Google Scholar
8. Chakrabarti, D.J. Cheong, B.-k., and Laughlin, D.E. in Automotive Alloys II, edited by Das, S.K. (The Minerals, Metals & Materials Society, 1998).Google Scholar
9. Sicha, W.E. in Aluminum, Properties and Physical Metallurgy, edited by Hatch, J.E. (American Society for Metals, Metals Park, OH, 1984), pp. 372373.Google Scholar
10. Dorward, R.C. Materials Science and Technology 14 (3), 187192 (1998).Google Scholar
11. Godard, H.P. Jepson, W.B. Bothwell, M.R. and Kane, R.L. The Corrosion of Light Metals (John Wiley & Sons, New York, 1967).Google Scholar
12. Binger, W.W. Hollingsworth, E.H. and Sprowls, D.O. in Aluminum, Properties and Physical Metallurgy, edited by Hatch, J.E. (American Society for Metals, Metals Park, OH, 1984), pp. 242319.Google Scholar
13. Uhlig, H.H. Corrosion and Corrosion Control (John Wiley & Sons Inc., New York, 1971).Google Scholar
14. Posada, M., Murr, L.E. Niou, C.S. Roberson, D., Little, D. Arrowood, R. and George, D. Materials Characterization 38, 259272 (1997).Google Scholar
15. Alwitt, R.S. in Oxides and Oxide Films, edited by Diggle, J.W. and Vijh, A.K. (Marcel Dekker, Inc., New York, 1976), Vol. 4, pp. 169254.Google Scholar
16. Violante, A. and Huang, P.M. Clays and Clay Minerals 41 (5), 590597 (1993).Google Scholar
17. Lippens, B.C. in Physical and Chemical Aspects of Adsorbents and Catalysts, edited by Linsen, B.G. (Academic Press, London, 1970), pp. 171211.Google Scholar
18. Papee, D. Tertian, R. and Biais, M. Bulletin de la Societe Chimique de France, 13011310 (1958).Google Scholar
19. Alevra, V. Giomirtan, D. and Ionescu, M. Revu Roumaine de Chemie 17 (7), 11631179 (1972).Google Scholar
20. MacLeod, I.D. Studies in Conservation 28, 107 (1983).Google Scholar
21. Graedel, T.E. Journal of the Electrochemical Society 136 (4), 204212 (1989).Google Scholar
22. Gayle, F.W. and Goodway, M., Science 266, 10151017 (1994).Google Scholar
23. Osamura, K. Murakami, Y. Sato, T. Takahashi, T. Abe, T. and Hirano, K. Acta metall. 31 (10), 16691673 (1983).Google Scholar