Hostname: page-component-8448b6f56d-dnltx Total loading time: 0 Render date: 2024-04-23T10:42:56.395Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of PECVD Deposited Fluorosilicate Glass (FSG) After CMP and Cleaning

Published online by Cambridge University Press:  15 February 2011

D. Mordo ,
I. Goswami ,
I. J. Malik ,
T. Mallon ,
R. Emami  and
B. Withers
D. Mordo
Affiliation:
Novellus Systems, Inc., San Jose, CA 95134
I. Goswami
Affiliation:
Novellus Systems, Inc., San Jose, CA 95134
I. J. Malik
Affiliation:
OnTrak Systems, Inc., Milpitas, CA 95035
T. Mallon
Affiliation:
OnTrak Systems, Inc., Milpitas, CA 95035
R. Emami
Affiliation:
OnTrak Systems, Inc., Milpitas, CA 95035
B. Withers
Affiliation:
OnTrak Systems, Inc., Milpitas, CA 95035
Get access

Abstract

A characterization of Plasma-Enhanced CVD Fluorinated Silicate Glass (FSG) is presented. This study investigates the behavior of FSG film in the Chemical Mechanical Polishing (CMP) environment and compares those characteristics to undoped TEOS (UTEOS), Thermal Oxide and Si-Rich oxide capped FSG films. The removal rate, refractive index (RI), surface roughness, contact angle, water content by FTIR and thermal desorption spectroscopy (TDS) were studied.

The FSG films are polished ˜ 10% faster than the undoped PECVD oxide films. Their composition was slightly changed after CMP as can be seen by the minor increase in the RI. A layer of Si-Rich oxide (SRO) was found to have a stabilizing effect on the FSG film during CMP and post CMP cleaning operations, and thus can be used in the intermetal dielectric schemes that require low dielectric constant FSG layers.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 443: Symposium H – Low-Dielectric Constant Materials II , 1996 , 127
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Carl, D., Mordo, D., Sparks, B., Logan, M. and Ritter, J., Proceedings of the Twelfth International VLSI Multilevel Interconnect Conference (VMIC), (1995), p.97 Google Scholar
[2] Usami, T., Shimokawa, K., Yoshimaru, M., Japanese J. Appl. Phys., 33 (1994), p.408 Google Scholar
[3] Chen, C-P., Lee, C-T., Lin, C-F., Yung, H-C., Fang, L., Proceedings of CMP-MIC (1996), p.82 Google Scholar
[4] Lim, S. W., Shimogaki, Y., Nakano, Y., Tada, K., Komiyama, H., Appl. Phys. Lett., 68 (6) (1996), p. 832 Google Scholar
[5] Mordo, D., Goswami, I., private communication (1996)Google Scholar
[6] Ravkin, M., Farber, J. J., Malik, I. J., Zhang, J., Jensen, A. J., Larios, J. M. De, Krusell, W. C., Proceedings of MRS Symposium, Vol.386, (1995), p. 115 Google Scholar
[7] Malik, I. J., Emami, R., Mallon, T., Withers, B., Mordo, D., Goswami, I., to be presented in the CMP-MIC Symposium, February, 1997.Google Scholar
[8] Mordo, D., Schuchmann, S., Swope, R., Yoo, W-S., Hsieh, J., teNijhuis, H., Nagy, F., Harrus, A., Proceedings of the Schumacher 8th Annual Dielectrics and CVD Metalization Symposium, (1996), p.199.Google Scholar