Hostname: page-component-7c8c6479df-p566r Total loading time: 0 Render date: 2024-03-29T11:23:03.150Z Has data issue: false hasContentIssue false

Degradation of Transparent Conductive Oxides, and the Beneficial Role of Interfacial Layers

Published online by Cambridge University Press:  31 May 2013

Heather M. Lemire
Affiliation:
Materials Science and Engineering Department, SDLE Center and MORE Center, Case Western Reserve University, Cleveland OH 44106
Kelly A. Peterson
Affiliation:
Materials Science and Engineering Department, SDLE Center and MORE Center, Case Western Reserve University, Cleveland OH 44106
Mona S. Breslau
Affiliation:
Materials Science and Engineering Department, SDLE Center and MORE Center, Case Western Reserve University, Cleveland OH 44106
Kenneth D. Singer
Affiliation:
Materials Science and Engineering Department, SDLE Center and MORE Center, Case Western Reserve University, Cleveland OH 44106
Ina T. Martin
Affiliation:
Materials Science and Engineering Department, SDLE Center and MORE Center, Case Western Reserve University, Cleveland OH 44106
Roger H. French
Affiliation:
Materials Science and Engineering Department, SDLE Center and MORE Center, Case Western Reserve University, Cleveland OH 44106
Get access

Abstract

The lifetime performance and reliability of photovoltaic (PV) modules are critical factors in their successful deployment. Interfaces in thin film PV, such as that between the transparent conductive oxide (TCO) electrode and the absorber layer, are frequently an avenue for degradation; this degradation is promoted by exposure to environmental stressors such as irradiance, heat and humidity. Understanding and suppressing TCO degradation is critical to improving stability and extending the lifetime. Commercially available indium tin oxide (ITO), fluorine doped tin oxide (FTO) and aluminum doped zinc oxide (AZO) were exposed to damp heat (DH), ASTM G154 cycle 4, and modified ASTM G154 for up to 1000 hours. The TCOs’ electrical and optical properties and surface energies were determined before and after each exposure and their relative degradation classified. Data demonstrate that AZO degraded most rapidly of all the TCOs, whereas ITO and FTO degraded at lower to non-quantifiable rates. One approach to suppress degradation could be to use interfacial layers (IFLs), including organofunctional silane layers, to modify the TCO. We modified the TCO surfaces using a variety of organofunctional silanes, and determined a range of surface energies could be obtained without affecting the electrical and optical properties of the TCO. Degradation studies of TCOs with a silane layer were also conducted. We found that an inhomogeneous silane layer was able to delay the resistivity increase for ITO in DH.

Type
Articles
Copyright
Copyright © Materials Research Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Osterwald, C.R. et al. ., National Center for PV and Solar Program Review Meeting, Denver, CO, 24 (2003).Google Scholar
Reese, M.O. et al. ., Solar energy Mat. & Solar Cells 92, 746752 (2008).CrossRefGoogle Scholar
Pern, F.J. et al. ., PVSC: IEEE, 1 (2008).Google Scholar
Sundaramoorthy, R. et al. ., SPIE Solar Energy+ Technology, pp. 74120J–74120J (2009).Google Scholar
Brumbach, M. and Armstrong, N.R., Ency. Electrochem. (2007).Google Scholar
Armstrong, N.R. et al. ., Accounts Chem. Res. 42 (11), 17481757 (2009).CrossRefGoogle Scholar
Armstrong, N.R. et al. ., Macromolecular Rapid Comm. 30 (9-10) 717731 (2009).CrossRefGoogle Scholar
Koch, N. et al. ., Appl. Phys. Lett. 82 (1), 7072 (2003)CrossRefGoogle Scholar
Grossiord, N. et al. ., Organic Electronics 13 (3), 432456 (2012).CrossRefGoogle Scholar
Allen, C.G. et al. ., Langmuir 24 (23), 1339313398 (2008).CrossRefGoogle Scholar
de Jong, M.P., et al. ., Appl. Phys. Lett. 77, 2255 (2000).CrossRefGoogle Scholar
Sauve, G. et al. ., J. Mat. Chem. 20, 31953201 (2010).CrossRefGoogle Scholar
Shircliff, R.A. et al. ., Langmuir, In Press (2013).Google Scholar
Kanan, S.M. et al. , Langmuir, 18 (17), 66236627 (2002).CrossRefGoogle Scholar
Howarter, J.A. and Youngblood, J.P., Langmuir 22 (26), 1114211147 (2006).CrossRefGoogle Scholar
Menzel, H. and Heise, A., Langmuir 13 (4), 723728 (1997).Google Scholar