Hostname: page-component-8448b6f56d-xtgtn Total loading time: 0 Render date: 2024-04-16T07:46:10.232Z Has data issue: false hasContentIssue false
  • English
  • Français

Dielectric Properties of Spray Deposited BaTiO3 and Ba0.68Sr0.32TiO3

Published online by Cambridge University Press:  17 March 2011

Kipyung Ahn ,
Bruce W. Wessels ,
Robert Greenlaw  and
Sanjay Sampath
Kipyung Ahn
Affiliation:
Department of Materials Science and Engineering, Northwestern University, Evanston, IL 60208
Bruce W. Wessels
Affiliation:
Department of Materials Science and Engineering, Northwestern University, Evanston, IL 60208
Robert Greenlaw
Affiliation:
Integrated Coating Solutions, Huntington Beach, CA
Sanjay Sampath
Affiliation:
Department of Materials Science and Engineering, SUNY-Stony Brook, Stony Brook, NY 11794
Get access

Abstract

The microstructure and dielectric properties of BaTiO3 and Ba0.68Sr0.32TiO3 thick films deposited by thermal spray were investigated. The as-deposited films were predominantly crystalline with a small amount of an amorphous second phase. The as-deposited BaTiO3 films had dielectric constants as high as 240 at room temperature. Upon annealing in air at 500°C, the dielectric constant increased to 480. This increase in dielectric constant was attributed, in part, to the crystallization of the amorphous second phase. The stabilized phase depended on the spray process used. The high velocity oxy fuel (HVOF) spray process resulted in the deposition of paraelectric BaTiO3, whereas the plasma spray process resulted in the ferroelectric phase.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 698: Symposia Q/EE Electroative Polymers and Rapid Prototyping , 2001 , Q3.6.1
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kulkarni, A., Sampath, S., Goland, A., Herman, H., Dowd, B., Scripta Mater. 43 (2000) 471 Google Scholar
2. Ctibor, P., Sedlacek, J., J. Eur. Ceram. Soc. 21 (2001) 1685 Google Scholar
3. Church, K. H., Fore, C., Feeley, T., Materials Development for Direct Write technologies, San Francisco, U.S.A., April 24-26, 2000, Mat. Res. Soc. Symp. Proc. 624 (2000) 3 Google Scholar
4. Sampath, S., Herman, H., Patel, A., Gambino, R., Greenlaw, R., Tormey, E., Materials Development for Direct Write technologies, San Francisco, U.S.A., April 24-26, 2000, Mat. Res. Soc. Symp. Proc. 624 (2000) 181Google Scholar
5. Arlt, G., Ferroelectrics 104 (1990) 217 Google Scholar
6. Krupanidhi, S. B., Peng, C. J., Thin Soild Films 305 (1997) 144 Google Scholar
7. Arlt, G., Hennings, D., With, G., J. Appl. Phys. 58 (4) (1985) 1619 Google Scholar
8. Frey, M. H., Payne, D. A., Phys. Rev. B 54 (5) (1996) 3158 Google Scholar