Skip to main content
×
Home
    • Aa
    • Aa

Mullite Formation in Al2O3/SiO2/SiC Composites for Processing Porous Radiant Burners

  • Daphiny Pottmaier (a1), Jefferson J. Rosario (a1), Marcio C. Fredel (a1), Amir A.M. Oliveira (a1) and Orestes E. Alarcon (a1)...
Abstract
ABSTRACT

Use of porous ceramic burners for natural gas combustion is an optimum alternative to enhance energy efficiency and decrease emission of pollutant gases per generated power. Materials requirements for the operation of such porous burners are mainly thermal shock and chemical resistance and those can be reached with cellular ceramics. Mullite was theoretically identified among the best materials for this application; however, its potential was not properly explored yet. Even though mullite can be synthesized from different compounds and processing routes, control of final material characteristics is complicated mainly due to the formation of amorphous phase. In this work, using a technological approach mullite burners were processed by the replication method starting from different mixtures of Al2O3/SiO2/SiC. Rheological study of the slurries has given additives content for the coating of the polyurethane sponges. After varying sintering temperatures up to 1600 °C and isotherm times for 12 h, microstructural aspects and product phases of the final composites were characterized in order to understand the influence of Al2O3/SiO2/SiC ratios in the formation of mullite phase and amorphous content.

Copyright
Linked references
Hide All

This list contains references from the content that can be linked to their source. For a full set of references and notes please see the PDF or HTML where available.

R. Viskanta , in Handbook of Porous Media, edited by K. Vafai (Taylor & Francis, New York, 2005).

A. Fuessel , H. Klemm , D. Boettge , F. Marschallek , J. Adler , A. Michaelis , IOP conf series in Ceram., Osaka (2011).

P.J. Elverum , J.L. Ellzey , D. Kovar , J. Mater. Sci. 40, 155 (2005).

C.Y. Zhao , T.J. Lu , H.P. Hodson , J.D. Jackson , Mater. Sci. Eng. A 367, 123 (2004).

A.A.M. Oliveira and M. Kaviany , Prog. Energ. Combust. Sci. 27, 523 (2001).

F.A.C. Oliveira , S. Dias , M.F. Vaz , J.C. Fernandes , J. Eur. Ceram. Soc. 26, 179 (2006).

A.E.M. Paiva , P. Sepulveda and V.C. Pandolfelli , J. Mater. Sci. 34, 2641 (1999).

M.W. Quintero , J.A. Escobar , A. Rey , A. Sarmiento , C.R. Rambo , A.P.N.d. Oliveira , D. Hotza , J. Mater. Process. Tech. 209, 5313 (2009).

E. Sousa , C.B. Silveira , T. Fey , P. Greil , D. Hotza , A.P.N. de Oliveira , Adv. App. Ceram. 104, 22 (2005).

S. Gómez , J. Escobar , O. Alvarez , C. Rambo , A. de Oliveira , D. Hotza , J. Mater. Sci. 44, 3466 (2009).

X. Zhu , D. Jiang and S. Tan , Mater. Sci. Eng. A 323, 232 (2002).

X. Zhu , D. Jiang and S. Tan , Mater. Res. Bull. 37, 541 (2002).

X. Zhu , D. Jiang , S. Tan , Z. Zhang , J. Am. Ceram. Soc. 84, 1654 (2001).

J. Randrianalisoa , Y. Bréchet , D. Baillis , Adv. Eng. Mater. 11, 1049 (2009).

D.X. Li and W.J. Thomson , J. Mater. Res. 6, 819 (1991).

H.-Y. Lu , W.-L. Wang , W.-H. Tuan , M.-H. Lin , J. Am. Ceram. Soc. 87, 1843 (2004).

A.J. Pyzik , C.S. Todd , C. Han , J. Eur. Ceram. Soc. 28, 383 (2008).

Y. Wang and W.J. Thomson , J. Mater. Res. 10, 912 (1995).

A.R. Studart , U.T. Gonzenbach , E. Tervoort , L.J. Gauckler , J. Am. Ceram. Soc. 89, 1771 (2006).

T. Kulkarni , H.Z. Wang , S.N. Basu , V.K. Sarin , J. Mater. Res. 24, 470 (2009).

B. Saruhan , U. Voβ , H. Schneider , J. Mater. Sci. 29, 3261 (1994).

Y.-F. Chen , M.-C. Wang , M.-H. Hon , J. Mater. Res. 19, 806 (2004).

Z. Yang , H. Du , M. Libera , I.L. Singer , J. Mater. Res. 10, 1441 (1995).

X.F. Zhang and L.C. De Jonghe , J. Mater. Res. 19, 2510 (2004).

Recommend this journal

Email your librarian or administrator to recommend adding this journal to your organisation's collection.

MRS Online Proceedings Library (OPL)
  • ISSN: -
  • EISSN: 1946-4274
  • URL: /core/journals/mrs-online-proceedings-library-archive
Please enter your name
Please enter a valid email address
Who would you like to send this to? *
×

Keywords: