Hostname: page-component-7c8c6479df-ws8qp Total loading time: 0 Render date: 2024-03-28T12:44:37.407Z Has data issue: false hasContentIssue false

Electrical Properties of Stacked RTO/RTCVD Oxides as Gate Dielectrics

Published online by Cambridge University Press:  22 February 2011

V. Misra
Affiliation:
North Carolina State University, Department of Electrical and Computer Engineering, Raleigh, N.C. 27695-7911
X-L. Xu
Affiliation:
North Carolina State University, Department of Electrical and Computer Engineering, Raleigh, N.C. 27695-7911
J.J. Wortman
Affiliation:
North Carolina State University, Department of Electrical and Computer Engineering, Raleigh, N.C. 27695-7911
Get access

Abstract

To meet the stringent demands of high quality gate performance in advanced devices, a more robust gate dielectric is needed. A stacked structure consisting of thermal oxide and deposited oxide is a potential candidate since it offers certain advantages over single layer oxides such as 1) reduced defect density, 2) reduced stress at the SiO2/Si interface due to stress compensation between the thermal and the deposited oxide, 3) less silicon consumption and 4) reduced thermal budget. In this study, stacked oxides consisting of RTO and RTCVD oxides are characterized. In contrast to other studies which use conventional LPCVD methods to form the top oxide, these stacked oxides have the advantages of rapid thermal and in-situ processing, which produces excellent bulk and interfacial properties. Electrical characterization has shown that these stacked oxides have superior performance compared to single layer furnace or deposited oxides.

Type
Research Article
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1) Lee, J., Chen, I.-C., and Hu, C., “Comparison between CVD and thermal oxide dielectric integrity”, IEEE Elect. Dev. Letts, vol EDL–7, no 9, Sept 1986.Google Scholar
2) Ting, W.. Li, P.C., Lo, G.Q. and Kwong, D.L., “Effects of rapid thermal oxidation on electrical characteristics of chemical-vapor-deposited SiO2 gate dielectrics”, J. Appl. Phys. vol 66, no 11, Dec 1989.Google Scholar
3) Freeman, D.W., “Thin-gate low-pressure chemical vapor deposition oxides”, J. Vac. Sci. Technol. A, vol 5, no 4, July 1987.CrossRefGoogle Scholar
4) Roy, P.K., Sinha, A.K., “Synthesis of High Quality Ultra-Thin Gate Oxides for ULSI Applications”, AT&T Technical Journal, Nov/Dec 1988.Google Scholar
5) Moazzami, R., Hu, C., “A High Quality Stacked Thermal/LPCVD Gate Oxide Techonlogy for ULSI”, IEEE Electron Dev. Lett., Vol 14, no 2 Feb 1993.CrossRefGoogle Scholar
6) Tseng, H.-H., Tobin, P.J., Hayden, J.D., Chang, K.-M., Miller, J.W., “A Comparison of CVD Stacked Gate Oxide and Thermal Gate Oxide for 0.5μm Transistors Subjected to Process-Induced Damage”, IEEE Trans on Electron Dev, Vol 40, no 3, March 1993.Google Scholar
7) Bauer, A.J., Wang, J., Aderhold, W.R., Burte, E.P. and Rysell, H., “Electrical properties of thin reoxidized dual-layer oxides”, Thin Solid Films, vol 230,1993.CrossRefGoogle Scholar
8) Tseng, H.-H., Tobin, P.J., “Thin CVD Stacked Gate Dielectric for ULSI Technology”, IEDM Tech Digest, 1993.Google Scholar
9) Xu, X.L., Kuehn, R.T., Wortman, J.J. and Öztürk, M.C., “Rapid thermal chemical vapor deposition of thin silicon oxide films using silane and nitrous oxide”, Appl. Phys. Lett. vol 60, no 24, June 1992.CrossRefGoogle Scholar