Hostname: page-component-8448b6f56d-42gr6 Total loading time: 0 Render date: 2024-04-19T19:28:56.982Z Has data issue: false hasContentIssue false

Epitaxial Co/NiAl Thin Film Growth on Si Substrates

Published online by Cambridge University Press:  10 February 2011

Heng Gong
Affiliation:
Department of Electrical and Computer Engineering, hgong@andrew.cmu.edu
Wei Yang
Affiliation:
Department of Electrical and Computer Engineering, hgong@andrew.cmu.edu
David N. Lambeth
Affiliation:
Department of Electrical and Computer Engineering, hgong@andrew.cmu.edu
David E. Laughlin
Affiliation:
Department of Materials Science and Engineering, Data Storage Systems Center, Carnegie Mellon University, Pittsburgh, PA 15213–3890
Get access

Abstract

Quad-crystal Co/NiAI/Ag thin films were epitaxially grown on hydrofluoric acid etched Si(111) single crystal substrates by sputter deposition. The orientation relationship was studied by x-ray θ;/2θ; diffraction and pole figure Φ-scan, and it was determined to be Co(image1) 11 NiAI(1 10) 11 Ag(111) 11 Si(1 11). The Ag layer contains two twin-related orientations of grains. NiAI grows with three variants of grains on the Ag(1 11) layer. Since Co(image1) contains grains with four possible easy axis directions when grown on each NiAl variant, the quad-crystal media consist of grains with twelve easy axis directions and exhibit nearly isotropic in-plane magnetic properties. Meanwhile, uni-crystal Co(image2)/NiAl(1 12) films were also epitaxially grown on Ag(110)/HF-Si(110) templates. The orientation relationships determined from these epitaxial films were very useful in understanding the texture evolution of the Co alloys on NiAl. It indicates that the Co (image2) texture evolution on the (110) texture of NiAl on amorphous substrates, such as NiP/A1Mg or glass, is due to a difficult to observe NiA1 (112) texture on the top of the (110) texture.

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Lee, L.-L, Laughlin, D.E. and Lambeth, D. N., IEEE Trans. Magn. 30, 3951(1991).Google Scholar
[2] Lambeth, D.N., Velu, E.M.T., Bellesis, G.H., Lee, L.L. and Laughlin, D.E., J. Appl. Phys. 79, 4496(1996).Google Scholar
[3] Madison, M. et al., IEEE Trans. Magn. 35, 695(1999).Google Scholar
[4] Lee, L.-L, Ph.D. Thesis, Carnegie Mellon University, Dept. of Materials Science and Engineering (1997).Google Scholar
[5] Gong, H., Rao, M., Laughlin, D.E., and Lambeth, D.N., J. Appl. Phys. 85,4699(1999).Google Scholar
[6] Yang, W., Lambeth, D.N., and Laughlin, D.E., J. Appl. Phys. 85,4723(1999).Google Scholar