Hostname: page-component-76fb5796d-5g6vh Total loading time: 0 Render date: 2024-04-25T10:22:14.169Z Has data issue: false hasContentIssue false
  • English
  • Français

Evolution of Electromigration-Induced Voids in Single Crystalline Aluminum Lines with Different Crystallographic Orientations

Published online by Cambridge University Press:  21 February 2011

Young-Chang Joo  and
Carl V. Thompson
Young-Chang Joo
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
Carl V. Thompson
Affiliation:
Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
Get access

Abstract

Transgranular slit-like voiding has been observed to cause fatal defects in electromigration- or stress migration-damaged Al submicron interconnects. To study the morphology and crystallographic characteristics of transgranular voids, we have tested single crystalline Al lines with various textures and in-plane orientations. Lines with (100), (110), and (111) textures were found to have triangular erosion voids along their edges. These voids were generally bound by {111} facets. While triangular erosion voids are frequently found in the lines, not all lead to failure of the lines. Some lines fail due to narrow, slit-like voids which are bound by {111} planes and lie along either <110> or <112> in-plane directions, depending on the orientations of the crystals relative to the orientations of the lines. Some of the slit-like voids are initiated along the erosion void facets. Similar void morphologies are observed in both unpassivated and passivated lines. Some of the lines have very large voids at the negative pad implying that voids are mobile. Through continued studies of the failure rates and failure morphologies of single crystalline lines, the mechanisms of transgranular failure of polycrystalline lines should be clarified.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 309: Symposium M2 – Materials Reliability in Microelectronics III , 1993 , 351
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Sanchez, J.E. Jr., McKnelly, L.T. and Morris, J.W. Jr., J. Electron. Mater. 19, 1213 (1990).Google Scholar
2. Rose, J.H., Appl. Phys. Letts. 61, 2170 (1992).Google Scholar
3. Sanchez, J.E. Jr., Kraft, O. and Arzt, E., Appl. Phys. Letts. 61, 3121 (1992).Google Scholar
4. Longworth, H.P. and Thompson, C.V., Appl. Phys. Letts. 60, 2219 (1992).Google Scholar
5. Thompson, C.V. and Cho, J., IEEE Electron Dev. Letts. 7, 667 (1986).Google Scholar
6. Pierce, J.M. and Thomas, M.E., Appl. Phys. Letts. 39, 165 (1981).Google Scholar
7. Cho, J., MIT Ph.D. Thesis (1990).Google Scholar
8. D'Heurle, F.M. and Ames, I., Appl. Phys. Letts. 16, 80 (1970).Google Scholar
9. Shingubara, S., Nakasaki, Y., and Kaneko, H., Appl. Phys. Letts. 58, 42 (1991).Google Scholar
10. Gangulee, A. and D'Heurle, F.M., Thin Solid Films 16, 227 (1973).Google Scholar