Hostname: page-component-8448b6f56d-t5pn6 Total loading time: 0 Render date: 2024-04-18T07:32:07.730Z Has data issue: false hasContentIssue false
  • English
  • Français

Evolution of Film Crystalline Structure During the Ultrafast Deposition of Crystalline Si Films

Published online by Cambridge University Press:  01 February 2011

Haijun Jia ,
Hiroshi Kuraseko ,
Hiroyuki Fujiwara  and
Michio Kondo
Haijun Jia
Affiliation:
jiahaijunlz@hotmail.com, AIST, Research Center for Photovoltaics, Central 2, 1-1-1 Umezono,, Tsukuba, Ibaraki, 305-8568, Japan
Hiroshi Kuraseko
Affiliation:
haijun-jia@aist.go.jp, The Furukawa Electric Co., Ltd., Yawata-Kaigandori,Chiba, 290-8555, Japan
Hiroyuki Fujiwara
Affiliation:
hiro-fujiwara@aist.go.jp, National Institute of Advanced Industrial Science and Technology (AIST), Research Center for Photovoltaics, Central 2, 1-1-1 Umezono,, Tsukuba, Ibaraki, 305-8568, Japan
Michio Kondo
Affiliation:
michio.kondo@aist.go.jp, National Institute of Advanced Industrial Science and Technology (AIST), Research Center for Photovoltaics, Central 2, 1-1-1 Umezono,, Tsukuba, Ibaraki, 305-8568, Japan
Get access

Abstract

By using a high density microwave plasma source, an ultrafast deposition rate over 1000 nm/s has been achieved for polycrystalline silicon (poly-Si) film deposition. We find that crystalline structure of the deposited film evolves along the film growth direction, i.e. large grains in surface region while small grains in the bottom region of the film. Systematic study of the deposition process has been performed as a function of the deposition duration. Based on the observed results, a possible mechanism, the annealing-assisted plasma-enhanced chemical vapor deposition, is proposed to describe the film growth process.

Keywords

annealingplasma-enhanced CVD (PECVD) (deposition)crystallographic structure
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1066: Symposium A – Amorphous and Polycrystalline Thin-Film Silicon Science and Technology—2008 , 2008 , 1066-A01-04
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Kondo, M. Solar Energy Material & Solar Cell 78, 543 (2003)Google Scholar
[2] Rech, B. Repmann, T. Donker, M. N. van den, Berginski, M. Kilper, T. Hupkes, J. Calnan, S. Stiebig, H. Wieder, S. Thin Solid Films 511-512, 548 (2006)Google Scholar
[3] Matsuda, A. Jpn. J. Appl. Phys. 43, 7909 (2004)Google Scholar
[4] Jia, H. Saha, J. K. Shirai, H. Jpn. J. Appl. Phys. 45, 666 (2006)Google Scholar
[5] Mai, Y. Klein, S. Geng, X. and Finger, F. Appl. Phys. Lett. 85, 2839 (2004)Google Scholar
[6] Fujiwara, H. Kondo, M. and Matsuda, A. J. Appl. Phys. 93, 2400 (2003)Google Scholar
[7] Fujiwara, H. Kondo, M. and Matsuda, A. Jpn. J. Appl. Phys. 41, 2821 (2002)Google Scholar
[8] Jia, H. Kuraseko, H. Kondo, M. J. Appl. Phys. 103, 024904 (2008)Google Scholar
[9] Kuraseko, H. Nakamura, T. Toda, S. Koaizawa, H. Jia, H. and Kondo, M. Proceeding of the 4th World Conference on Photovoltaic Energy Conversion, 2006, p 1380 Google Scholar
[10] Voutsas, A. T. Applied Surface Science 208-209, 250 (2003)Google Scholar
[11] Holmen, G. Linnros, J. and Svensson, B. Appl. Phys. Lett. 45, 1116 (1984)Google Scholar