Hostname: page-component-8448b6f56d-qsmjn Total loading time: 0 Render date: 2024-04-18T21:23:34.275Z Has data issue: false hasContentIssue false
  • English
  • Français

Grain Boundary Curvature in Polycrystalline Metallic Thin Films

Published online by Cambridge University Press:  14 March 2011

Alexander H. King ,
Rakesh Mangat  and
Kwame Owusu-Boahen
Alexander H. King
Affiliation:
School of Materials Engineering, Purdue University, West Lafayette IN 47907-1289.
Rakesh Mangat
Affiliation:
Massachusetts Institute of Technology, Cambridge, MA, 02139
Kwame Owusu-Boahen
Affiliation:
Department of Materials Science & Engineering, State University of New York, Stony Brook NY 11794-2275
Get access

Abstract

Well-annealed thin films are typically observed to exhibit mean grain diameters that are approximately equal to the film thickness. The standard explanation of this “sheet thickness effect” is that it results from a balance of grain boundary curvature in two different directions which, in turn, results from pinning at grain boundary grooves. TEM experiments have been performed to assess this model, and it is found that the predicted curvature about axes in the film plane is absent. Alternate explanations of the sheet thickness effect are considered.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 615: Symposium G – Polycrystalline Metal & Magnetic Thin Films - 2000 , 2000 , G7.8.1
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Knorr, D.B. and Rodbell, K.P., J. Appl. Phys., 79, 2407 (1996).10.1063/1.361168Google Scholar
2. Thompson, C.V. and Carel, R., J. Mech. Phys. Sol., 44, 657 (1996).10.1016/0022-5096(96)00022-1Google Scholar
3. Grovenor, C.R.M., Hentzell, H.T.G. and Smith, D.A., Acta Metall., 32, 773 (1984).10.1016/0001-6160(84)90150-0Google Scholar
4. Beck, P.A., Kremer, J.C., Demer, L.J. and Holzworth, M.L., Met. Trans., 175, 372 (1948).Google Scholar
5. Mullins, W.W., Acta Metall., 6, 414 (1958).10.1016/0001-6160(58)90020-8Google Scholar
6. Singh, V., Dixit, G. and King, A.H., J. Elec. Mater., 26, 987 (1997).10.1007/s11664-997-0235-0Google Scholar
7. Singh, V. and King, A.H., Scripta Mater., 34, 1723 (1996).10.1016/1359-6462(96)00042-5Google Scholar
8. King, A.H. in Grain Growth in Polycrystalline Materials III, Eds. Weiland, H., Adams, B.L. and Rollett, A.D., TMS, Warrendale, PA (1998) p. 333.Google Scholar
9. Gottstein, G., Sursaeva, V. and Shvindlerman, L.S., Interface Science, 7, 273 (1999).10.1023/A:1008721426104Google Scholar
10. Gottstein, G., King, A.H. and Shvindlerman, L.S., Acta Mater., 48, 397 (2000).10.1016/S1359-6454(99)00373-0Google Scholar
11. Adamik, M., Barna, P.B. and Tomov, I., Thin Solid Films, 359, 33 (2000).10.1016/S0040-6090(99)00691-4Google Scholar