Hostname: page-component-76fb5796d-r6qrq Total loading time: 0 Render date: 2024-04-25T10:41:59.330Z Has data issue: false hasContentIssue false

High-Tc and high-Jc SmFeAs(O,F) films on fluoride substrates grown by molecular beam epitaxy

Published online by Cambridge University Press:  29 August 2012

Michio Naito
Affiliation:
Department of Applied Physics, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184-8588, Japan TRIP, Japan Science and Technology Agency (JST), Chiyoda, Tokyo 102-0075, Japan
Shinya Ueda
Affiliation:
Department of Applied Physics, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184-8588, Japan TRIP, Japan Science and Technology Agency (JST), Chiyoda, Tokyo 102-0075, Japan
Soichiro Takeda
Affiliation:
Department of Applied Physics, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184-8588, Japan TRIP, Japan Science and Technology Agency (JST), Chiyoda, Tokyo 102-0075, Japan
Shiro Takano
Affiliation:
Department of Applied Physics, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184-8588, Japan TRIP, Japan Science and Technology Agency (JST), Chiyoda, Tokyo 102-0075, Japan
Akiyasu Yamamoto
Affiliation:
Department of Applied Chemistry, University of Tokyo, Hongo, Tokyo 113-8656, Japan
Get access

Abstract

We report on our growth of superconducting SmFeAs(O,F) films by F diffusion. In our process, F-free SmFeAsO films were grown by molecular beam epitaxy (MBE) first, and subsequently F was introduced into the films via F diffusion from an overlayer of SmF3. We performed a detailed comparison of the growth conditions and also the properties of resultant films for fluoride and oxide substrates. The best films on CaF2 exhibited a high transition temperature, Tcon (Tcend) = 57.8 K (56.4 K) at highest, which may exceed the highest Tc ever reported for bulk samples. Furthermore the films on CaF2 also showed high critical current density over 1 MA/cm2 in self-field at 5 K.

Type
Articles
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kamihara, Y., Watanabe, T., Hirano, M., and Hosono, H., J. Am. Chem. Soc. 130 (2008) 3296.Google Scholar
2. Kawaguchi, T., Uemura, H., Ohno, T., Watanabe, R., Tabuchi, M., Ujihara, T., Takenaka, K., Takeda, Y., and Ikuta, H., Appl. Phys. Express 2 (2009) 093002.Google Scholar
3. Kawaguchi, T., Uemura, H., Ohno, T., Tabuchi, M., Ujihara, T., Takenaka, K., Takeda, Y., and Ikuta, H., Appl. Phys. Lett. 97 (2010) 042509.Google Scholar
4. Ueda, S., Takeda, S., Takano, S., Yamamoto, A., and Naito, M., Appl. Phys. Lett. 99 (2011) 232505.Google Scholar
5. Takeda, S., Ueda, S., Takano, S., Yamamoto, A., and Naito, M., Supercond. Sci. Technol. 25 (2012) 035007.Google Scholar
6. Takano, S., Ueda, S., Takeda, S., Sugawara, H., and Naito, M., Physica C 475 (2012) 10.Google Scholar