Hostname: page-component-8448b6f56d-xtgtn Total loading time: 0 Render date: 2024-04-23T21:02:26.926Z Has data issue: false hasContentIssue false
  • English
  • Français

Influence of Hipping Pressure on the Strength and the Porosity of Porous Copper

Published online by Cambridge University Press:  15 February 2011

Atsushi Takata ,
K. Ishizaki ,
Y. Kondo  and
T. Shioura
Atsushi Takata
Affiliation:
Nagaoka University of Technology, Department of Materials Science and Engineering, School of Mechanical Engineering, Nagaoka, Niigata 940–21, Japan
K. Ishizaki
Affiliation:
Nagaoka University of Technology, Department of Materials Science and Engineering, School of Mechanical Engineering, Nagaoka, Niigata 940–21, Japan
Y. Kondo
Affiliation:
Kagawa Prefectural Industrial Technology Center, Takamatsu 761, Japan
T. Shioura
Affiliation:
Central Niigata Prefecture Regional Industries Promotion Center, Sanjo 955, Japan
Get access

Abstract

Open porous copper metals, which have high strength, high open porosity and well controlled pore size distribution, were produced by a hot isostatic press (HIP) process. They were sintered at different temperatures from 973 to 1273K under various HIPping pressures up to 200MPa. Pore size distribution and Young's modulus of the sintered samples were analyzed. The HIPped products have greater strength and higher open porosity than those of the normally sintered ones. The internal structural parameters such as pore size distribution were controlled by changing the HIPping pressure.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 251: Symposium S – Pressure Effects on Materials Processing and Design , 1991 , 133
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kato, N., Bull. Ceram. Soc. Jpn., 23, 726–730(1988).Google Scholar
2. Shikata, H., Funabashi, N., Ebine, Y. and Hayasaka, T., Modem Development in Powder Met., 12, 497 (1984).Google Scholar
3. Hiki, T., Bull. Ceram. Soc. Jpn., 20, 168–174 (1985).Google Scholar
4. Ishizaki, K., Takata, A. and Okada, S., J. Jpn. Ceram. Sot.,98, 533–540 (1990).CrossRefGoogle Scholar
5. Ishizaki, K., Okada, S., Fujikawa, T. and Takata, A., Patent Pending (Japan, U. S. Germany)Google Scholar
6. Price, P. E. and Kohler, S. P., Hot Isostatic Pressing of Metal Powders in Metal Handbook 9th ed. vol 7 Powder Metallurgy (ASM, Metal Park, Ohio, 1984), pp. 418–443.Google Scholar
7. Ishizaki, K. and Tanaka, K., Sintering of Advanced Materials -Applications of Hot Isostatic Pressing-, (Uchida Rokakuho, lTokyo, 1987).Google Scholar
8. Davies, W. R., Trans. Br. Ceram. Soc.,67, 515–541 (1968).Google Scholar
9. Bal'shin, M. Yu., Dokl. Akad. Nauk. SSSR, 154, 80 (1964)Google Scholar