Hostname: page-component-7c8c6479df-nwzlb Total loading time: 0 Render date: 2024-03-29T07:31:27.133Z Has data issue: false hasContentIssue false

Large In-Plane Lattice Expansion in NiAs-MnSb Thin Films Induced by ns Laser Recrystallization

Published online by Cambridge University Press:  15 February 2011

Yukiko Kubota
Affiliation:
IBM Research Division, Almaden Research Center, 650 Harry Road, San Jose, CA 95120-6099 Department of Materials Science and Engineering, Stanford University, Stanford, CA 94305
Grace L. Gorman
Affiliation:
IBM Research Division, Almaden Research Center, 650 Harry Road, San Jose, CA 95120-6099
Ernesto E. Marinero
Affiliation:
IBM Research Division, Almaden Research Center, 650 Harry Road, San Jose, CA 95120-6099
Get access

Abstract

Sputter deposited MnSb thin films were annealed utilizing KrF excimer laser pulses (16ns), and the resulting structural and magnetic changes investigated. These changes are compared to those observed when the samples are subjected to isothermal and rapid thermal annealing treatments. Isothermal and rapid thermal annealing induce significant lateral grain growth, whereas the laser treatment produces vertical grain size refinement with no appreciable lateral growth. Annealing is shown to increase the hexagonal c-axis, reaching an expansion value of 7% for the laser annealed samples. This c-axis expansion has a strong influence on the magnetic properties of the thin films. Mechanisms for the c-axis expansion are discussed.

Type
Research Article
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Massalsky, T. B., in Binary Alloy Phase Diagrams, 2nd. edition (1990)Google Scholar
2. Guillaud, C., Ann. Phys., 4 671, (1949).Google Scholar
3. Okita, T. and Makino, Y., J. Phys. Soc. Jpn., 25, 120, (1968)Google Scholar
4. Teramoto, I. and Run, A. M. J. G. van, J Phys. Chem. Solids, 29, 347 (1968).Google Scholar
5. Nagasaki, H., Wakabayashi, I. and Mimomura, S., J. Phys. Chem. Solids, 30, 329 (1969).Google Scholar
6. Reimers, W., Hellner, E., Treumann, W. and Brown, P.J., J. Phys. Chem. Solids, 44, 195, (1983).Google Scholar
7. Darnell, F. J., Cloud, W. H. and Jarrett, H. S., Phys. Rev., 130,647 (1963).Google Scholar
8. Schaefer, H.-E., Kisker, H., Kronmuller, H. and Wurschum, R., NanoStruct. Mat., 1, 523, (1992).Google Scholar
9. Doerner, M. F. and Nix, W. D., in CRC Critical Reviews in Solid State and Materials Science, vol. 14, Issue 3, pp.225268, (1988).Google Scholar