Hostname: page-component-8448b6f56d-jr42d Total loading time: 0 Render date: 2024-04-24T06:18:03.360Z Has data issue: false hasContentIssue false

New Grain-Boundary Phases for Nitrogen Ceramics

Published online by Cambridge University Press:  25 February 2011

Derek P. Thompson*
Affiliation:
Materials Division, Dept. of Mechanical, Materials & Manufacturing Engineering.The University of Newcastle, Newcastle upon Tyne, NEI 7RU, U.K.
Get access

Abstract

The drive for improved refractoriness in nitrogen ceramics, which has motivated the removal of residual glass from grain-boundaries by heat-treatment at sub-solidus temperatures, has resulted in the discovery of a wide range of crystalline oxynitride phases. Generally, these phases are oxygen-rich, and can be classified in the same way as the mineral silicates, in which oxygen atoms are coordinated to a maximum of two silicon atoms, with SiO4 tetrahedra joined at either 0,1,2,3 or 4 corners to other tetrahedra. However, the field of oxynitride crystal chemistry is wider than this, because nitrogen in SiN4 tetrahedra commonly occurs coordinated to three silicon atoms, and an additional range of structures exist with nitrogen in this coordination.

Oxynitride analogues of mineral silicates are well known in neso-, soro- and cyclostructure types; new structures have recently been reported which belong to the pyroxene family (ino-silicates), and information on their preparation and crystal chemistry is reported here. The sialon U-phase (typical composition Ln3Si3Al3O12N2, Ln = La,Ce,Nd,Sm), is an example of an oxynitride with a structure intermediate between layer (phyllo-) and framework (tecto-) types. Sialon W-phase (approximate composition Ln4Si9Al5O30N, Ln = La,Ce,Nd) has not been completely characterized, but appears to have a structure related to the amphibole group of double-chain silicates.

Comments are made on the many oxynitride structures which are still uncharacterized. The suitability of all these oxynitrides as grain-boundary phases in silicon nitride and sialon ceramics is discussed.

Type
Research Article
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Jack, K.H., Trans. & J. Brit. Ceram. Soc., 72, 376 (1973).Google Scholar
2. Negita, K., J. Mat. Sci. Lett., 4, 755 (1985).Google Scholar
3. Thompson, D.P. in Advanced Structural Materials, edited by Han, Y. (C-MRS '90, Peking China, 1990) pp. 435440.Google Scholar
4. Leng-Ward, G., Lewis, M.H. in Glasses and Glass-Ceramics, edited by Leng-Ward, G. and Lewis, M.H., Chapman & Hall, 1990), p. 106.Google Scholar
5. Thompson, D.P. in Preparation and properties of silicon nitride based ceramics, edited by Tien, T.Y. and Bonnell, D.A. (Trans Tech, Zurich, 1989), p. 21.Google Scholar
6. Mandal, H., Thompson, D.P., Ekström, T. in Materials for Advanced Technology Applications, edited by Buggy, M. and Hampshire, S. (Trans Tech, Zurich, 1991), p. 187.Google Scholar
7. Korgul, P., Thompson, D.P., Brit. Ceram. Proc. 42, 69 (1989).Google Scholar
8. Korgul, P., private communication (1988).Google Scholar
9. Käll, P.-O., Grins, J., Liddell, K., Korgul, P., Thompson, D.P. in New Materials and their Applications, edited by Holland, D. (IOP Publishing Ltd., Bristol, 1990), p. 427.Google Scholar
10. Käll, P.-O., Grins, J., Olsson, P.-O., Liddell, K., Korgul, P., Thompson, D.P., J. Mater. Chem., 1, 233 (1991).Google Scholar
11. Fernie, J.A., Leng-Ward, G., Lewis, M.H., J. Mat. Sci. Lett., 9, 29 (1989).Google Scholar
12. Hampshire, S., Leigh, M., Morrissey, V., Pomeroy, M.J., Saruhan, B. in 3rd Int. Symp. on Ceramic Materials and Components for Engines, edited by Tennery, V.J. (American Ceramic Society, Westerville, Ohio, 1989), p. 442.Google Scholar