Hostname: page-component-7c8c6479df-27gpq Total loading time: 0 Render date: 2024-03-19T04:56:20.040Z Has data issue: false hasContentIssue false

Novel Growth of Biodegradable Thin Films via Matrix Assisted Laser Processing

Published online by Cambridge University Press:  15 February 2011

A.L. Mercado
Affiliation:
University of Virginia, Dept of Materials Science and Engineering
J.M. Fitz-Gerald
Affiliation:
University of Virginia, Dept of Materials Science and Engineering
R. Johnson
Affiliation:
University of Virginia, Dept of Chemistry Charlottesville, VA 22904-4745
J.D. Talton
Affiliation:
Nanotherapeutics Inc, Alachua, FL
Get access

Abstract

The ability to controllably deposit polymers onto flat or curved surfaces in a quasi-dry environment while retaining native-like structure is of extreme importance to the medical and microelectronics communities. Current applications range from protective and conformal coatings for microelectronics to sustained drug delivery platforms in the pharmaceutical industry. In this research, biodegradable thin films of poly(DL-lactide-co-glycolide) (PLGA), were deposited onto flat substrates of Si and NaCl using a pulsed excimer laser, (λ= 248 nm) with fluences ranging from 0.1 – 1.0 J/cm2 via matrix assisted pulsed laser evaporation (MAPLE). Results are shown from scanning electron microscopy (SEM) to study morphological features and Fourier Transform Infrared Spectroscopy (FTIR), and Nuclear Magnetic Resonance (NMR) to measure chemical structure compared to original PLGA.

Type
Research Article
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

references

1 Dagani, R., Ch. Eng. News 77, 25, “Accounts of Chemical Research”, 32, Issue 5 (1999).Google Scholar
2 McGill, R.A., Piqué, A., Chrisey, D.B., Fitz-Gerald, J.M., Nguyen, V., Chung, R., “Laser Processing of Polymers and Conductive Materials for the Fabrication of Conductive Composite Coatings: Applications with Chemical Sensors”, Proc. Sixth International Conference on Composites Engineering, ICCE/6 Orlando, FL, 563 (1999).Google Scholar
3 Edrington, A.C., Urbas, A.M., DeRege, P., Chen, C., Swager, T., Hadjichristidis, M., Xeridou, M., Fetters, L.J., Joannopoulos, J.D., Fink, Y., Thomas, E.L., “Polymer Based Photonic CrystalsAdv. Mater., 13, 421, (2001).Google Scholar
4 Okamoto, Y., “Lanthanide Metal Polymer Complexes, Synthesis, Characterization and ApplicationMakromol. Chem., Macromol. Symp., 59, 82, (1992).Google Scholar
5 Du, C., Ma, L., Xu, Y., Li, W., “Synthesis and Fluorescent Properties of Europium-Polymer Complexes Containing Napthoate and 1,10-Phenanthroline LigandsJ. Appl. Poly. Sci., 66, 1405, (1997).Google Scholar
6 Jenkins, A.L., Murray, G.M., “Polymer-Based Lanthanide Luminescent Sensors For Detection of the Hydrolysis Product of the Nerve Agent Soman in WaterAnal. Chem., 71, 373, (1999).Google Scholar
7 McGill, R.A., Abraham, M. H., et al., “Choosing Polymer Coatings for Chemical Sensors”, Chemtech 24(9): 2737, (1994).Google Scholar
8 B.R. Ringeisen, Callahan, J., Wu, P., Pique, A., Spargo, B., McGill, R.A., Bucaro, M., Kim, H., Bubb, D.M., and Chrisey, D.B., “Novel Laser-Based Deposition of Active Protein Thin Films”, Langmuir 17, 34723479 (2001).Google Scholar
9 Hickey, A., “Efficacy of rifampicin-poly(lactide-co-glycolide) microspheres in treating tuberculosis”, in Respiratory Drug Delivery VI., Hilton Head, SC: Interpharm Press, Inc., (1998).Google Scholar
10 Edwards, D.A., “Large porous particles for pulmonary drug delivery”. Science, 276 (5320): p. 1868–71, (1997).Google Scholar
11 Gopferich, A., Alonso, M.J., Langer, R., “Development and characterization of microencapsulated microspheres”, Pharm Res, 11(11): p. 1568–74, (1994).Google Scholar
12 McGill, R.A. and Chrisey, D.B., MAPLE patent, Navy case No.78, 117, (1999).Google Scholar
13 Chrisey, D. B., McGill, R. A., Horwitz, J.S., Pique, A., Ringeisen, B. R., Bubb, D. M., and Wu, P. K., Laser Deposition of Polymer and Biomaterial Thin Films, Chem. Rev., 103, 553576 (2003)Google Scholar
14 Zhigilei, L., Leveugle, E., Garrison, B.J., Yingling, Y.G., and Zeifman, M., “Computer Simulations of Laser Ablation of Molecular Substrates”, Chem. Rev, 103, 321348, (2003).Google Scholar
15 Dreisewerd, K., “The Desorption Process in MALDI”, Chem. Rev, 103, 395425 (2003).Google Scholar
16 Bubb, D. M., P. K. W., Horwitz, J. S., Callahan, J. H., Galicia, M., Vertes, A., McGill, R. A., Houser, E. J., Ringeisen, B. R., and Chrisey, D. B.The effect of the matrix on film properties in matrix-assisted pulsed laser evaporation.” Journal of Applied Physics A 91(4): 20552059 (2002).Google Scholar
17 Skoog, D.A., Principles of Instrumental Analysis, Chapter 11, Saunders (1997).Google Scholar
18 Hrkach, J.S., Langer, R., “Nanotechnology for biomaterials engineering: structural characterization of amphiphilic polymeric nanoparticles by 1H NMR spectroscopy.” Biomaterials 18(1): 2730, (26 April 1996).Google Scholar
19 Fitz-Gerald, J.M., Mercado, A. L., “Pulse Laser Deposition of Biodegradable Thin Films: A Comparison of Matrix Assisted and Conventional Methods”, J. of Materials Research (manuscript in prep) April 2003.Google Scholar