Hostname: page-component-8448b6f56d-42gr6 Total loading time: 0 Render date: 2024-04-23T09:33:00.731Z Has data issue: false hasContentIssue false
  • English
  • Français

Role of Biomechanics in Functional Tissue Engineering

Published online by Cambridge University Press:  01 February 2011

Kai-Nan An
Kai-Nan An*
Affiliation:
Biomechanics Laboratory, Division of Orthopedic Research Mayo Clinic College of Medicine 200 First Street SW Rochester, MN 55905, U.S.A.
Get access

Abstract

Functional tissue engineering establishes functional criteria for design and manufacture of the scaffold matrix for repair and replacement. It also provides useful and strategic information in mechanical stimulation of the cells seeded in the matrix before and after surgical placement to enhance the success of tissue engineering. Biomechanics plays an important role in accomplishing these requirements by assessing the in vivo environment and the material properties.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 844: Symposium Y – Mechanical Properties of Bio-Inspired and Biological Materials , 2004 , Y1.1
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Butler, D.L., Goldstein, S.A. and Guilak, F., “Functional tissue engineering: the role of biomechanics,” J. Biomech. Eng. 122, 570–575 (2000).Google Scholar
2. An, K.N., Chao, E.Y., Cooney, W.P. and Linscheid, R.L., “Forces in the normal and abnormal hand,” J. Orthop. Res. 3, 202–211 (1985).Google Scholar
3. An, K.N., Kaufman, K.R., and Chao, E.Y.S., “Physiological considerations of muscle force through the elbow joint, J. Biomech. 22, 1249–1256 (1989).Google Scholar
4. Luo, Z.P., Hsu, H.C., Grabowski, J.J., Morrey, B.F. and An, K.N., Mechanical environment associated with rotator cuff tears, J. Shoulder Elbow Surg. 7, 616–620 (1998).Google Scholar
5. An, K.N., Himeno, S., Tsumura, H., Kawai, T. and Chao, E.Y.S., Pressure distribution on articular surfaces: Application to joint stability evaluation, J. Biomech. 23, 1013–1020 (1990).Google Scholar
6. Westerlind, K.C., Wronski, T.J., Ritman, E.L., Luo, Z.P., An, K.N., Bells, N.H. and Turner, R.T., Estrogen regulates the rate of bone turnover but bone balance in ovariectomized rats is modulated by prevailing mechanical strain, Proc. Natl. Acad. Sci. 94, 4199–4204 (1997).Google Scholar
7. Babis, G.C., An, K.N., Chao, E.Y.S., Rand, J.A. and Sim, F.H., Double level osteotomy of the knee: A method to retain joint-line obliquity. J. Bone Joint Surg. 84A, 1380–1388 (2002).Google Scholar
8. Schuind, F., Garcia-Elias, M., Cooney, W.P. III and An, K.N.: Flexor tendon forces: In vivo measurements, J. Hand Surg. 17A, 291–298 (1992).Google Scholar
9. Davis, J., Kaufman, K.R. and Lieber, R.L., Correlation between active and passive isometric force and intramuscular pressure in the isolated rabbit tibialis anterior muscle, J. Biomech. 36, 505–512 (2003).Google Scholar
10. Bergmann, G., Graichen, F. and Rohlmann, A.: Hip joint loading during walking and running, measured in two patients, J. Biomech. 26, 969–90 (1993).Google Scholar
11. Hodge, W.A., Carlson, K.L., Fijan, R.S., Burgess, R.G., Riley, P.O., Harris, W.H. and Mann, R.W., Contact pressures from an instrumented hip endoprosthesis. J. Bone Joint Surg. 71A, 1378–1386 (1989).Google Scholar
12. Stansfield, B.W., Nicol, A.C., Paul, J.P., Kelly, I.G., Graichen, F. and Bergmann, G., Direct comparison of calculated hip joint contact forces with those measured using instrumented implants. An evaluation of a three-dimensional mathematical model of the lower limb, J. Biomech. 36, 929–936 (2003).Google Scholar
13. Brand, R.A., Pedersen, D.R., Davy, D.T., Kotzar, G.M., Heiple, K.G. and Goldberg, V.M., Comparison of hip force calculations and measurements in the same patient. J. Arthroplasty 9, 45–51 (1994).Google Scholar
14. Bay, B.K., Texture correlation: a method for the measurement of detailed strain distributions within trabecular bone, J. Orthop. Res. 13, 258–267 (1995).Google Scholar
15. Gilchrist, C. L., Xia, J.Q., Setton, L.A. and Hsu, E.W., High-resolution determination of soft tissue deformations using MRI and first-order texture correlation, IEEE Trans. Med. Imaging 23, 546–553 (2004).Google Scholar
16. Bey, M.J., Song, H.K., Wehrli, F.W. and Soslowsky, L.J., A noncontact, nondestructive method for quantifying intratissue deformations and strains, J. Biomech. Eng. 124, 253–258 (2002).Google Scholar
17. Ko, C.C., Douglas, W.H., DeLong, R., Rohrer, M.D., Swift, J.Q., Hodges, J.S., An, K.N. and Ritman, E.L., Effects of implant healing time on crestal cone loss of a controlled-load dental implant, J. Dent. Res. 82, 585–591 (2003).Google Scholar
18. Screen, H.R., Lee, D.A., Bader, D.L. and Shelton, J.C., Development of a technique to determine strains in tendons using the cell nuclei, Biorheology 40, 361–368 (2003).Google Scholar
19. Yamamoto, E., Hayashi, K. and Yamamoto, N., Mechanical properties of collagen fascicles from the rabbit patellar tendon, J. Biomech. Eng. 121, 124–131 (1999).Google Scholar
20. Luo, Z.P. and An, K.N., Development and validation of a nanometer manipulation and measurement system for biomechanical testing of single macro-molecules. J. Biomech. 31, 1075–1079 (1998).Google Scholar
21. Miyazaki, H. and Hayashi, K., Tensile tests of collagen fibers obtained from the rabbit patellar tendon, Biomed Microdev. 2, 151–157 (1999).Google Scholar
22. Sun, Y.L., Luo, Z.P., Fertala, A. and An, K.N., Direct quantification of the flexibility of type I collagen monomer, Biochem. Biophys. Res. Commun. 295, 382–386 (2002).Google Scholar
23. An, K.N., Sun, Y.L. and Luo, Z.P., Flexibility of type I collagen and mechanical property of connective tissue, Bioreheology 41, 239–246 (2004).Google Scholar
24. Jenkyn, T.R., Ehman, R.L. and An, K.N., Noninvasive muscle tension measurement using the novel technique of magnetic resonance elastography (MRE), J. Biomech. 36, 1917–1921 (2003).Google Scholar
25. Muthupillai, R., Lomas, D.J., Rossman, P.J., Greenleaf, J.F., Manduca, A. and Ehman, A., Magnetic Resonance Elastography by Direct Visualization of Propagating Acoustic Strain Waves, Science 269, 1854–1857 (1995).Google Scholar