Hostname: page-component-8448b6f56d-qsmjn Total loading time: 0 Render date: 2024-04-19T08:25:53.792Z Has data issue: false hasContentIssue false
  • English
  • Français

Storage Alternatives for High-Calcium Fly Ashes

Published online by Cambridge University Press:  21 February 2011

Carol L. Kilgour ,
Kenneth L. Bergeson  and
Scott Schlorholtz
Carol L. Kilgour
Affiliation:
Department of Civil and Construction Engineering, Iowa State University, Ames, IA 50011
Kenneth L. Bergeson
Affiliation:
Department of Civil and Construction Engineering, Iowa State University, Ames, IA 50011
Scott Schlorholtz
Affiliation:
Department of Civil and Construction Engineering, Iowa State University, Ames, IA 50011
Get access

Abstract

One of the major problems currently restricting the utilization of high-calcium (ASTM Class C) fly ashes in Iowa is lack of adequate storage space. High-calcium fly ashes are self-cementitious and are generally not economically reclaimable once they have been exposed to water (i.e., the environment). Since the on-site silo storage capacity of a given power plant is normally only about one or two weeks of overall generating capacity (assuming nearly full load), the fly ash industry is hard-pressed to meet the demand for fly ash during the peak construction months.

This paper presents some early research findings concerning the storage alternatives available for these high-calcium fly ashes. A simple pan agglomerator, requiring only the addition of a water spray was used to produce fly ash pellets. Since the method required minimal energy input the process would be expected to be economically feasible for field production. Laboratory produced pellets appeared strong and durable and would be expected to withstand field handling without significant degradation. The pelletization process did not appear to result in a loss of reactivity for either the air-dried or water-cured pellets. This is highly important for potential use in Portland cement concrete or soil stabilization.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 136: Symposium O – Fly Ash and Coal Conversion By-Products V , 1988 , 161
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Hall, J.S., Hannaford, C.S., Cashion, J.D., Brown, L.J., Ottrey, A.L. and Tang, D., in Agglomeration 1985: 4th Int. Symp., edited by Capes, C.E., Toronto 1985, pp. 945–953.Google Scholar
2. Fuerstenau, D.W. and Abouzeid, A.Z.M. in Agglomeration 1982: 3rd Int. Symrp., Vol 2, 1981, Nurnburg, pp. H2–H18.Google Scholar
3. Furstenau, D.W. and Malhotra, V.P., in Bureau of Mines Open Report 89–83 June 1983.Google Scholar
4. Schlorholtz, S., Bergeson, K. and Demirel, T., in Fly Ash and Coal Conversion By-Products: Characterization. Utilization and Disposal III, Mat. Res. Soc. Symp. Proc. Vol 86, edited by McCarthy, G.J., Glasser, F.P., Roy, D.M. and Diamond, S. (Materials Research Society, Pittsburgh, 1987) pp. 325–336.Google Scholar
5. Schlorholtz, S., Bergeson, K. and Demirel, T. in Fly Ash and Coal Conversion By-Products: Characterization, Utilization and Disposal III, Mat. Res. Soc. Symp. Proc. Vol 86, edited by McCarthy, G.J., Glasser, F.P., Roy, D.M. and Diamond, S. (Materials Research Society, Pittsburgh, 1987) pp. 337–342.Google Scholar
6. Schlorholtz, S., Bergeson, K. and Demirel, T. in Fly Ash and Coal Conversion By-Products: Characterization. Utilization and Disposal III, Mat Res Soc. Symp. Proc. Vol 86, edited by McCarthy, G.J., Glasser, F.P., Roy, D.M. and Hemmings, R.T. (Materials Research Society Pittsburgh, 1988) pp. 107–116.Google Scholar
7. Burnett, G. and Gokhale, A.J., in Proc. 4th Int. Ash Util. Symp., Volume 2, 1987 pp. 61–1 to 61–17.Google Scholar