Hostname: page-component-7c8c6479df-94d59 Total loading time: 0 Render date: 2024-03-28T00:59:09.283Z Has data issue: false hasContentIssue false

Study of Conditioner Abrasives in Chemical Mechanical Planarization

Published online by Cambridge University Press:  31 January 2011

Chhavi Manocha
Affiliation:
cmanocha@mail.usf.edu, University of South Florida, Chemical Engineering, Tampa, Florida, United States
Ashok Kumar
Affiliation:
vkgupta@usf.edu, University of South Florida, Mechanical Engineering, Tampa, Florida, United States
Vinay K. Gupta
Affiliation:
vkgupta@eng.usf.edu, University of South Florida, Chemical Engineering, Tampa, Florida, United States
Get access

Abstract

Chemical Mechanical Planarization (CMP) has emerged as the central technology for polishing wafers in the semiconductor manufacturing industry to make integrated multi-level devices. Both chemical and mechanical processes work simultaneously to achieve local and global planarization. Although extensive research has been carried out to understand the various factors affecting the CMP process, many aspects remain unaddressed. One such aspect of CMP is the role of abrasives in the process of conditioning. Abrasives play an important role during conditioning to regenerate the clogged polishing pads. This research is focused on the study of abrasives in the process of conditioning with a focus on the size of abrasives. With diamond being widely used as an abrasive for conditioning the polishing pad, five different sizes of diamonds ranging from 0.25μm to 100μm were selected to condition the commercially available IC 1000 polishing pad. Properties like pad roughness and pad wear were measured to understand the effect of the abrasive size on the pad morphology and pad topography. In-situ ‘coefficient of friction’ was also monitored on the CETR bench top tester. The final impact was seen in the form of surface defects on the polished copper wafers using optical microscopy.

Type
Research Article
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Hooper, B. J., Byrne, G., Galligan, S., Journal of Materials Processing Technology 123, 107 (2002).Google Scholar
2 Oliver, M. R., Chemical-Mechanical Planarization of Semiconductor Materials. (Springer, 2004).Google Scholar
3 Steigerwald, J. M., Murarka, S. P., Gutmann, R. J., Chemical Mechanical Planarization of Microelectronic Materials. (Wiley-Interscience, 1997).Google Scholar
4 Zantye, P. B., Kumar, A., Sikder, A. K., Materials Science & Engineering R 45, 89 (2004).Google Scholar
5 Sun, T., Borucki, L., Zhuang, Y., Philipossian, A., Materials Research Society Symposium Proceedings 991, 45 (2007).Google Scholar