Hostname: page-component-8448b6f56d-t5pn6 Total loading time: 0 Render date: 2024-04-23T06:25:00.506Z Has data issue: false hasContentIssue false

Substrate Temperature Effects of the ZnO:AlF3Transparent Conductive Oxide

Published online by Cambridge University Press:  25 January 2013

Tien-Chai Lin
Affiliation:
Department of Electrical Engineering, Kun Shan University, No. 949, Da Wan Road, Yung-Kang District, Tainan, 710, Taiwan, ROC
Wen-Chang Huang*
Affiliation:
Department of Electro-Optical Engineering, Kun Shan University, No. 949, Da-Wan Road, Yung-Kang District, Tainan, 710, Taiwan, ROC
Chin-Hung Liu
Affiliation:
Department of Electrical Engineering, Kun Shan University, No. 949, Da Wan Road, Yung-Kang District, Tainan, 710, Taiwan, ROC
Shang-Chou Chang
Affiliation:
Department of Electrical Engineering, Kun Shan University, No. 949, Da Wan Road, Yung-Kang District, Tainan, 710, Taiwan, ROC
*
*Corresponding author: email: wchuang@mail.ksu.edu.tw
Get access

Abstract

Thermal effects on the crystal structure, electrical and optical characteristics of the Al and F co-doped ZnO films (ZnO:AlF3) are discussed in the paper. The ZnO:AlF3 thin films are prepared by RF sputtering with a constant power (ZnO/AlF3=100W/75W) toward the ZnO and AlF3 targets. The substrate temperature varied from room temperature to 250 °C with a step of 50 °C during thin film deposition. The crystalline quality of the ZnO:AlF3 film improved as the substrate temperature increased, with a corresponding increase in grain size. The improvement of the film quality leads to a higher electron mobility, with electron mobility of 0.85 cm2/V-s for the film deposited at the substrate temperature of 250 °C. The doping effect of fluorine in ZnO, and hence carrier concentration, was reduced at high temperature due to the vaporization of fluorine. This led to a reduction of carrier concentration with increase of temperature from 25 to 200°C. The corresponding resistivity increased from 3.60×10−2 to 6.0×10−2 Ω-cm. While for a further increase in substrate temperature, the doping of Al to the ZnO film was increased and resulted in an increase in carrier concentration.

Type
Articles
Copyright
Copyright © Materials Research Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Hyun, S. M., Hong, K., Kim, B. H., J. Korean Ceram. Soc. 33, 149154 (1996).Google Scholar
Lee, J.H., Ko, K.H., Park, B.O., J. Cryst. Growth 247, 119125 (2003).CrossRefGoogle Scholar
Hong, R.J., Jiang, X., Szyszka, B., Sittinger, V., Pflug, A., Appl. Surf. Sci. 207, 341350(2003).CrossRefGoogle Scholar
Olvera, M.L., Maldonado, A., Asomoza, R., Sol Energy Mater Sol Cells 73, 425433 (2002).CrossRefGoogle Scholar
Choi, B. G., Kim, I. H., Kim, D. H., Lee, K. S., Lee, T. S., Cheong, B., J. Eur. Ceram. Soc. 25, 21612165 (2005).CrossRefGoogle Scholar
Ellmer, K., Diesner, K., Wendt, R., Fiechter, S., Solid State Phenomena, 51-52, 541 (1996).CrossRefGoogle Scholar
Wu, W.F., Chiou, B.S., Hsien, S.T., Semicond. Sci Technol. 9, 1242 (1994).CrossRefGoogle Scholar
Kawamata, K., Shouzu, T., Mitamura, N., Vacuum, 51, 559564 (1998).CrossRefGoogle Scholar
Fang, G., Li, D., Vacuum 68, 363372 (2003).CrossRefGoogle Scholar
Hu, Y.M., Lin, C.W., Thin Solid Films 497, 130134 (2006).CrossRefGoogle Scholar