Hostname: page-component-8448b6f56d-wq2xx Total loading time: 0 Render date: 2024-04-16T12:11:10.018Z Has data issue: false hasContentIssue false
  • English
  • Français

Temperature and Orientation Dependence of Surface Film Effects in Single Crystal Nial

Published online by Cambridge University Press:  28 February 2011

R.D. Noebe ,
J.T. Kim  and
R. Gibala
R.D. Noebe
Affiliation:
Department of Materials Science and Engineering, The University of Michigan, Ann Arbor, MI 48109.
J.T. Kim
Affiliation:
Department of Materials Science and Engineering, The University of Michigan, Ann Arbor, MI 48109.
R. Gibala
Affiliation:
Department of Materials Science and Engineering, The University of Michigan, Ann Arbor, MI 48109.
Get access

Abstract

During deformation of bcc metals and bcc-based ordered alloys, conditions of elastic and plastic constraint associated with the presence of thin adherent surface films can be responsible for introducing increased densities of mobile dislocations in the metal, resulting in enhanced ductility and reduced yield and flow stresses of the film-coated materials. In the present paper, surface film effects were investigated as a function of temperature and crystallographic orientation for single crystal β-NiAl. Appreciable temperature-dependent and orientation-dependent surface film effects were observed, as were significant effects of film adherence on the observation of surface film softening.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 81: Symposium H – High-Temperature Ordered Intermetallic Alloys II , 1986 , 473
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Noebe, R.D. and Gibala, R., High Temperature Ordered Intermetallic Alloys, Koch, C.C., Liu, C.T. and Stoloff, N.S., eds., MRS Proceedings, Vol. 39, p. 319, (1985).Google Scholar
2. Noebe, R.D. and Gibala, R., Scripta Met. 20, 1635 (1986).CrossRefGoogle Scholar
3. Noebe, R.D. and Gibala, R., Structure and Deformation of Boundaries, Subramanian, K. and Imam, M.A., eds., p. 89, TMS-AIME, Warrendale, PA (1986).Google Scholar
4. Ruddle, G.E. and Wilsdorf, H.G.F., Appl. Phys. Lett. 12, 271 (1968).CrossRefGoogle Scholar
5. Sethi, V.K. and Gibala, R., Phil. Mag. 37, 419 (1978)Google Scholar
6. Eshelby, J.D., Phil. Mag. 40, 903 (1949).Google Scholar
7. Yamaguchi, M., Mechanical Properties of BCC Metals, Meshii, M., ed., p. 31, TMS-AIME, Warrendale, PA (1982).Google Scholar
8. Doychak, J.K., M.S. Thesis (1984), Ph.D. Thesis (1986), Case Western Reserve University, Cleveland, OH.Google Scholar
9. Doychak, J.K., Mitchell, T.E. and Smialek, J.L., High Temperature Ordered Intermetallic Alloys, Koch, C.C., Liu, C.T. and Stoloff, N.S., eds., MRS Proceedings, vol. 39, p. 475, (1985).Google Scholar
10. Noebe, R.D., M.S. Thesis, Case Western Reserve University, Cleveland, OH., (1986).Google Scholar
11. Kim, J.T., Ph.D. Thesis, The University of Michigan, Ann Arbor, MI., (in progress).Google Scholar
12. Mitchell, T.E., private communication.Google Scholar
13. Pascoe, R.T. and C.Newey, W.E., Phys. Stat. Sol. 29, 357 (1968).Google Scholar
14. Fraser, H.L., Loretto, M.H., Smallman, R.E. and Wasilewski, R.J., Phil. Mag. 28, 639 (1973).Google Scholar
15. Sethi, V.K., Gibala, R. and Heuer, A.H., Amer. Cer. Soc. Bull. 57, 308 (1978).Google Scholar