Hostname: page-component-8448b6f56d-sxzjt Total loading time: 0 Render date: 2024-04-18T01:43:11.048Z Has data issue: false hasContentIssue false
  • English
  • Français

Thermal Aging of Primary Circuit Piping Materials in PWR Nuclear Power Plant

Published online by Cambridge University Press:  31 January 2011

Xitao Wang ,
Shilei Li ,
Shuxiao Li ,
Fei Xue  and
Guogang Shu
Xitao Wang
Affiliation:
xtwang@ustb.edu.cn, University of Science and Technology Beijing, State Key Laboratory for Advanced Metals and Materials, Beijing, China
Shilei Li
Affiliation:
dylishilei@gmail.com, University of Science and Technology Beijing, State Key Laboratory for Advanced Metals and Materials, Beijing, China
Shuxiao Li
Affiliation:
zangxue510515@gmail.com, University of Science and Technology Beijing, State Key Laboratory for Advanced Metals and Materials, Beijing, China
Fei Xue
Affiliation:
xuefei@cgnpg.com, China Guangdong Nuclear Power Group, Shenzhen, China
Guogang Shu
Affiliation:
shuguogang@cgnpc.com, China Guangdong Nuclear Power Group, Shenzhen, China
Get access

Abstract

The reserved cast austenitic stainless steels (CASS) for primary circuit piping in Daya Bay Nuclear Power Plant were studied. The changes of microstructure, mechanical properties and fracture behavior were investigated using SEM, EPMA, TEM and nanoindentation after accelerated aging at 400°C for up to 10000 h. Microhardness of ferrite increased rapidly in the early stage and then increased slowly later. The impact energy of materials declined with the aging time and reduced to a very low level after aging for 10000 hours. Fracture morphology displayed a mixture of cleavage in ferrite along with dimple and tearing in austenite. Two kinds of precipitations were observed in ferrite by TEM after long periods of aging. The fine Cr-enriched α′ phases precipitated homogeneously in ferrite, and a few larger G phases were observed as well. The precipitation of α′ phases was considered to be the primary mechanism of thermal aging embrittlement in CASS.

Keywords

embrittlementsteelmicrostructure
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1215: Symposium V – Materials Research Needs to Advance Nuclear Energy , 2009 , 1215-V18-07
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Chung, H M, Leax, T R. Materials Science and Technology, 6,249(1990).Google Scholar
[2] Chorpa, O K. Argonne: Argonne National Laboratory, CONF-950908-10(1995).Google Scholar
[3] Chung, H M. International Journal of Pressed Vessels and Piping, 50,179(1992).Google Scholar
[4] Argonne, H M Chung: Argonne National Laboratory, ANL/CP-70872(1991).Google Scholar
[5] Yamada, T, Okano, S, Kuwano, H. Journal of Nuclear Materials, 350,47(2006).Google Scholar
[6] Danoix, F, Auger, P. Materials Characterization, 44,177(2000).Google Scholar
[7] Vrinat, M, Cozar, R, Meyzaud, Y. Scripta Metallurgica, 20, 1101(1986).Google Scholar
[8] Mathew, M D, Lietzan, L M, Murty, K L et al. Materials Science and Engineering A, 269, 186(1999).Google Scholar
[9] Danoix, F, Auger, P, Blavette, D. Microscopy and Microanalysis,10,349(2004).Google Scholar
[10] Kawaguchi, S, Sakamoto, N, Takano, G et al. Nuclear Engineering and Design, 174, 273(1997).Google Scholar
[11] Chorpa, O K. Argonne: Argonne National Laboratory, CONF-8310143-65(1983).Google Scholar
[12] Chorpa, O K. Argonne: Argonne National Laboratory, CONF-8410142-38(1984).Google Scholar