Hostname: page-component-8448b6f56d-jr42d Total loading time: 0 Render date: 2024-04-23T22:12:16.240Z Has data issue: false hasContentIssue false
  • English
  • Français

Thermal Fatigue of NiAl Single Crystals

Published online by Cambridge University Press:  10 February 2011

M. T. Kush ,
J. W. Holmes  and
R. Gibala
M. T. Kush
Affiliation:
Present address: Rolls-Royce, P.O. Box 420, Speed Code 0–2, Indianapolis, IN 46206–0420
J. W. Holmes
Affiliation:
The University of Michigan, Department of Mechanical Engineering and Applied Mechanics, Ann Arbor, MI 48109–2125
R. Gibala
Affiliation:
The University of Michigan, Department of Materials Science and Engineering, Ann Arbor, MI 481092136
Get access

Abstract

Single crystals of [001]-oriented NiAI single crystals were subjected to thermal fatigue by a method which employs induction heating of disk-shaped specimens heated in an argon atmosphere. Several time-temperature heating and cooling profiles were used to produce different thermal strain histories in specimens cycled between 973 K and 1473 K. After thermal cycling, pronounced shape changes in the form of diametrical elongations along <100> directions with accompanying increases in thickness at and near the <100> specimen axes were observed. The deformations were analyzed in terms of operative slip systems in tension and compression, ratchetting (cyclic strain accumulation), and the elastic properties of NiAl. The experimental results correlate best with thermal stresses associated with the large elastic anisotropy of NiAl.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 552: Symposium KK – High-Temperature Ordered Intermetallic Alloys VIII , 1998 , KK8.4.1
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kush, M.T., Holmes, J.W. and Gibala, R., in High Temperature Ordered Intermetallic Alloys IV, (ed. Johnson, L. et al.), Mater. Res. Soc. Symp. Proc. 213, 261 (1991).Google Scholar
2. Holmes, J.W., McClintock, F.A., O'Hara, K.S. and Conners, M.E. in Low-cycle Fatigue, (eds. Saloman, H.D. et al.) ASTM STP-942, 672 (1987).Google Scholar
3. ABAQUS Users Manual, Hibbitt, Karlsson and Sorensen, Inc., Providence, R.I., (1982).Google Scholar
4. Nine, H.D., Appl. Phys. Lett. 22, 382 (1973).CrossRefGoogle Scholar
5. Nine, H.D., Phil. Mag. 26, 1409 (1972).CrossRefGoogle Scholar
6. Nine, H.D., J. Applied Phys. 44, 4875 (1973).CrossRefGoogle Scholar
7. Bowman, K.J., Ph.D. Dissertation, University of Michigan (1987).Google Scholar
8. Kim, J.T. and Gibala, R., in High Temperature Ordered Intermetallic Alloys IV, (ed. Johnson, L. et al.), Mater. Res. Soc. Symp. Proc. 213, 261 (1991).Google Scholar
9. Kim, J.T., Ph.D. dissertation, Univ. of Michigan (1991).Google Scholar
10. Zaluzec, N.J. and Fraser, H.L., Scripta Met. 8, 1049 (1974).CrossRefGoogle Scholar
11. Takasugi, T., Kishino, J. and Hanada, S., Acta metall. 41–4, 1021 (1993).CrossRefGoogle Scholar