Hostname: page-component-8448b6f56d-tj2md Total loading time: 0 Render date: 2024-04-19T21:26:53.255Z Has data issue: false hasContentIssue false
  • English
  • Français

Thermomechanical Behavior of Tantalum Thin Films: The Effects of Oxygen and the β–α Phase Transformation

Published online by Cambridge University Press:  01 February 2011

Robert Knepper ,
Blake Stevens  and
Shefford P. Baker
Robert Knepper
Affiliation:
Cornell University, Department of Materials Science and Engineering Ithaca, NY 14853, U.S.A.
Blake Stevens
Affiliation:
Cornell University, Department of Materials Science and Engineering Ithaca, NY 14853, U.S.A.
Shefford P. Baker
Affiliation:
Cornell University, Department of Materials Science and Engineering Ithaca, NY 14853, U.S.A.
Get access

Abstract

β-Ta films were prepared in an ultra-high vacuum sputter deposition system, and the stresses that arose during thermal cycles to 750° C were measured using an in situ substrate curvature measurement system. The oxygen content in the environment was controlled during both deposition and thermomechanical testing. In films with no added oxygen, phase transformation from β to α takes place in distinct “jumps.” Addition of controlled amounts of oxygen to the annealing atmosphere led to increases in compressive stress, inhibited the phase transformation, and altered the magnitudes of the “jumps” in stress. The stresses in Ta films were found to be sensitive to oxygen content as well as thermal history.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 795: Symposium U – Thin Films - Stresses and Mechanical Properties X , 2003 , U11.27
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Ino, K., Shinohara, T., Ushiki, T., and Ohmi, T., J. Vac. Sci. Technol. A 15, 2627 (1997).Google Scholar
2. Catania, P., Roy, R.A., and Cuomo, J.J., J. Appl. Phys. 74, 1008 (1993).Google Scholar
3. Kondo, K., Nakabayashi, M., Kawakami, K., Chijimatsu, T., Nakaishi, M., Yamada, M., Yamabe, M., and Sugishima, K., J. Vac. Sci. Technol. A 11, 3067 (1993).Google Scholar
4. Jiang, A., Yohannan, A., Nnolim, N.O., Tyson, T.A., Axe, L., Lee, S.L., and Cote, P., Thin Solid Films 437, 116 (2003).Google Scholar
5. Burbank, R.D., J. Appl. Cryst. 6, 217 (1973).Google Scholar
6. Clevenger, L.A., Mutscheller, A., Harper, J.M.E., Cabral, C. Jr, and Barmak, K., J. Appl. Phys. 72, 4918 (1992).Google Scholar
7. Cabral, C. Jr, Clevenger, L.A., and Schad, R.G., J. Vac. Sci. Technol. B 12, 2818 (1994).Google Scholar
8. Wuu, D.S., Chan, C.C., Horng, R.H., Lin, W.C., Chiu, S.L., and Wu, Y.Y., Applied Surface Science 144–145, 315 (1999).Google Scholar
9. Wuu, D.S., Lee, M.L., and Lin, T.Y., Applied Surface Science 92, 626 (1996).Google Scholar
10. Liu, L., Gong, H., Wang, Y., Wang, J., Wee, A.T.S., and Liu, R., Materials Science and Engineering C 16, 85 (2001).Google Scholar
11. Shu, J.B., Ph.D. Dissertation, Cornell University, Ithaca, NY (2003).Google Scholar
12. Stoney, G., Proceedings of the Royal Society of London A82, 172 (1909).Google Scholar
13. Hoogeveen, R., Moske, M., Geisler, H., and Samwer, K., Thin Solid Films 275, 203 (1996).Google Scholar