Hostname: page-component-8448b6f56d-t5pn6 Total loading time: 0 Render date: 2024-04-23T18:06:16.738Z Has data issue: false hasContentIssue false
  • English
  • Français

Thin Film InN/Anatase Bilayers as a Substitute Dye/Semiconductor Interface for Solar Cells

Published online by Cambridge University Press:  01 February 2011

Daniel Hoy  and
Martin Kordesch
Daniel Hoy
Affiliation:
dh851403@ohio.edu, Ohio University, Physics and Astronomy, Clippinger Labs RM 251B, Athens, OH, 45701, United States
Martin Kordesch
Affiliation:
kordesch@ohio.edu, Ohio University, Physics and Astronomy, Clippinger Labs RM 251B, Athens, OH, 45701, United States
Get access

Abstract

The electronic properties of an InN/anatse bilayer, proposed as a replacement for the dye/semi-conductor interface in Dye Sensitized Solar Cell[1, 2], are measured. RF sputtered thin films of anatase and InN are used as the “dye” replacement. . Two types of InN film are prepared: polycrystalline samples deposited at high temperature, with an optical band gap of < 1 eV, and as-deposited (at least partially amorphous) samples with an optical band gap >1 eV. Energy Dispersive X-ray fluorescence, X-ray Diffraction, and Raman spectroscopy are used to characterize the samples. The resistance in the dark and under illumination are measured. The samples deposited at high temperature are crystalline and have a sheet resistivity ≈ 4 Ω/⁐, and display no photoconductivity. The partially amorphous samples have sheet resistivity of ≈ 500Ω/⁐. Since both types of InN films, including high quality (based on band gap) polycrystalline InN, do not show increased conductivity with light, we conclude that a solar cell based on an InN/anatase bilayer is not feasible.

Keywords

nitridephotovoltaicphotoconductivity
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1102: Symposium LL – Energy Harvesting–From Fundamentals to Devices , 2008 , 1102-LL04-02
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

References:

[1] Wang, J. H. and Lin, M. C. “Low-Pressure Organometallic Chemical Vapor Deposition of Indium Nitride on Titanium Dioxide Nanoparticles,” ChemPhysChem, vol. 5, pp. 1615–1618, 2004.Google Scholar
[2] Lin, J. S. Chou, W. C. Lu, S. Y. Jang, G. J. Tseng, B. R. and Li, Y. T. “Density functional study of the interfacial electron transfer pathway for monolayer-adsorbed InN on the TiO2 anatase (101) surface,” Journal Of Physical Chemistry B, vol. 110, pp. 23460–23466, 2006.Google Scholar
[3] Adachi, S. Optical properties of crystalline and amorphous semiconductors. Boston: Kluwer Academic Publishers, 1999.Google Scholar
[4] Khoshman, J. M. and Kordesch, M. E. “Optical constants and band edge of amorphous zinc oxide thin films,” Thin Solid Films, vol. 515, pp. 7393, 2007.Google Scholar
[5] Khoshman, J. M. and Kordesch, M. E. “Optical absorption in amorphous InN thin films,” Journal of Non-Crystalline Solids, vol. 352, pp. 5572–5577, 2006.Google Scholar
[6] Agull, oacute, Rueda, F. Mendez, E. E. Bojarczuk, B. and Guha, S. “Raman spectroscopy of wurtzite InN films grown on Si,” Solid State Communications, vol. 115, pp. 19, 2000.Google Scholar
[7] Kuball, M. Pomeroy, J. W. Wintrebert-Fouquet, M., Butcher, K. S. A., Lu, H. and Schaff, W. J., “A Raman spectroscopy study of InN,” Journal of Crystal Growth, vol. 269, pp. 59, 2004.Google Scholar