Pyrochlore is a complex oxide with the nominal formula A2B2X6Y, where A and B are cations in VIII and VI-fold co-ordination, X and Y are anions. Its structure is derived from the cubic fluorite structure. In natural pyrochlores A = Na, Mg, K, Ca, Mn, Fe, Sr, Sb, Cs, Ba, REEs, Pb, Bi, Th, and U; B = Nb, Ta, Ti, Zr, Sn, W, Fe, and Al; X = O; Y = O, OH, or F. Synthetic pyrochlores have been repeatedly described as matrices designed for actinide-bearing waste immobilization. In synthetic pyrochlores site "A" is mainly occupied by Ca, U, An, and REEs; B = Ti and Zr; X and Y = O. In this work we have studied pyrochlores in crystalline titanate-based waste forms. The ceramics were fabricated in the system: Ca-Mn-U-REE-Zr-Ti-Al-O by cold pressing and sintering, melting in a high-temperature furnace, and inductive melting in a cold crucible. All specimens were studied by XRD, SEM/EDS and TEM methods. The amount of pyrochlore in the samples varied from 10 to 70%. Other phases in these ceramics were brannerite, perovskite, zirconolite, murataite, hibonite, loverengite, pseudobrookite, and rutile. Compositions of the pyrochlores correspond to stoichiometry: A2B2O7-x, 0.1222=2.89-2.93A, 1=100; d400=2.51, 1=10-25; d440=1.779-1.809, 1=20-60; d622=1.512-1.540, 1=20-35; d444=1.451-1.477, I=10-15; d662=1.158-1.173, I=10-15. These data allowed the determination of the unit-cell dimensions of the pyrochlores as 1.00-1.02 nm. Results obtained from TEM research agree well with these values. Distribution of U and REEs among all phases of the ceramics was characterized. The main substitutions which have influenced the pyrochlore compositions are discussed.