Hostname: page-component-7c8c6479df-fqc5m Total loading time: 0 Render date: 2024-03-28T14:53:09.470Z Has data issue: false hasContentIssue false

Characterization of rice cultivar response to florpyrauxifen-benzyl

Published online by Cambridge University Press:  21 July 2020

Hannah E. Wright*
Affiliation:
Graduate Student, Department of Crop Soil and Environmental Sciences, University of Arkansas, Fayetteville, AR, USA
Jason K. Norsworthy
Affiliation:
Distinguished Professor, Department of Crop Soil and Environmental Sciences, University of Arkansas, Fayetteville, AR, USA
Trenton L. Roberts
Affiliation:
Associate Professor, Department of Crop Soil and Environmental Sciences, University of Arkansas, Fayetteville, AR, USA
Robert Scott
Affiliation:
Professor, Department of Crop Soil and Environmental Sciences, University of Arkansas, Stuttgart, AR, USA
Jarrod Hardke
Affiliation:
Associate Professor, Department of Crop Soil and Environmental Sciences, University of Arkansas, Stuttgart, AR, USA
Edward E. Gbur
Affiliation:
Professor of Statistics and Laboratory Director, University of Arkansas, Fayetteville, AR, USA
*
Author for correspondence: Hannah Wright, Department of Crop Soil and Environmental Sciences, University of Arkansas, Fayetteville, AR, 72704. Email: hannah.wright@uga.edu
Rights & Permissions [Opens in a new window]

Abstract

Many factors such as environment, herbicide rate, growth stage at application, and days between sequential applications can influence the response of a crop to herbicides. Florpyrauxifen-benzyl is a new broad-spectrum, POST herbicide that was commercialized for use in U.S. rice production in 2018. Field experiments were conducted in 2018 at the Pine Tree Research Station (PTRS) near Colt, AR, and the Rice Research and Extension Center (RREC), near Stuttgart, AR, to evaluate crop injury and yield response of three rice cultivars to sequential applications of florpyrauxifen-benzyl. Greenhouse and growth chamber experiments were conducted at the Altheimer Laboratory in Fayetteville, AR, to evaluate cultivar responses when florpyrauxifen-benzyl was applied at 30 or 60 g ae ha−1 to rice exposed to different temperature regimes or at various growth stages. Three rice cultivars were used in all experiments: long-grain variety ‘CL111’, medium-grain variety ‘CL272’, and long-grain hybrid cultivar ‘CLXL745’. CL111 exhibited sufficient tolerance to florpyrauxifen-benzyl with only 10% visible injury and no effect on yield. CL272 showed 15% injury 3 wk after the second application in the field experiment when applications were made 14 d apart. Additionally, 12% injury was observed in greenhouse studies when florpyrauxifen-benzyl was applied at 30 g ae ha−1, averaged over various growth stages at application. Florpyrauxifen-benzyl did not reduce the yield of CL272 in field experiments, indicating that CL272 can recover from florpyrauxifen-benzyl injury. As much as 64% injury was observed for CLXL745 at 3 wk after application (WAA) when sequential herbicide applications were made 4 d apart. High levels of injury occurred in the growth chamber and greenhouse studies for this cultivar as well. Sequential applications of florpyrauxifen-benzyl reduced yields of CLXL745 in nearly all treatments. Data from these experiments suggest that CL272 and CLXL745 are sensitive to sequential applications of florpyrauxifen-benzyl. Growers must follow the prescribed guidelines for using florpyrauxifen-benzyl in these cultivars and others like it.

Type
Research Article
Creative Commons
Creative Common License - CCCreative Common License - BY
This is an Open Access article, distributed under the terms of the Creative Commons Attribution licence (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted re-use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright
© The Author(s), 2020. Published by Cambridge University Press on behalf of Weed Science Society of America

Introduction

Florpyrauxifen-benzyl is a new synthetic auxin herbicide (Weed Science Society of America [WSSA] Group 4) released for commercial use in rice in 2018 by Corteva Agriscience. Previous research has explored both the weed control spectrum and the chemical properties of the herbicide, including residual activity and translocation. Florpyrauxifen-benzyl controls many troublesome weeds in rice production, including yellow nutsedge (Cyperus esculentus L.), hemp sesbania [Sesbania herbacea (Mill.) McVaugh], and barnyardgrass [Echinochloa crus-galli (L.) P. Beauv.] when used at the labeled rate of 30 g ae ha−1 (Miller and Norsworthy Reference Miller and Norsworthy2018a). Florpyrauxifen-benzyl has a site of action that is different than that of quinclorac (WSSA Group 4), favoring the AFB5 IAA co-receptor instead of the TIR1 co-receptor, which allows florpyrauxifen-benzyl to have activity on quinclorac-resistant barnyardgrass (Lee et al. Reference Lee, Sundaram, Armitage, Evans, Hawkes, Kepinski, Ferro and Napier2014; Miller et al. Reference Miller, Norsworthy and Scott2018; Walsh et al. Reference Walsh, Nela, Merlo, Honma, Hicks, Wolff, Matsumura and Davies2006). Florpyrauxifen-benzyl has minimal residual activity and should therefore be used in conjunction with a herbicide with residual activity to control weeds with prolonged emergence (Miller and Norsworthy Reference Miller and Norsworthy2018b). Florpyrauxifen-benzyl can be applied at 30 g ae ha−1, with a maximum of two applications per growing season (Anonymous 2017).

Much of the research conducted with florpyrauxifen-benzyl to date has focused on weed control and characterization of its chemical properties. Thus far little research has been conducted to determine differences in cultivar responses to an application of the herbicide. Injury symptoms from florpyrauxifen-benzyl can be in the form of leaf malformations, reduced height, and reduced biomass (JKN, personal communication). The herbicide label also warns of potential risk for rice injury to long-grain hybrid cultivars and medium-grain varieties (Anonymous 2017).

Arkansas is the top producer of rice in the United States, producing roughly half of all rice hectares harvested in the country in 2018 (USDA-NASS 2019). Of the rice grown in Arkansas, 49% is planted with long-grain hybrid cultivars; 39% is planted with long-grain, pureline cultivars; and 13% is planted with medium-grain, pureline cultivars (Hardke Reference Hardke2018). Understanding cultivar tolerances to new herbicides is crucial to reducing the risk of yield loss and to make appropriate rate and timing recommendations for producers.

Tolerance of crops to herbicides is due in part to the ability of a crop to metabolize and detoxify the herbicide (Cole Reference Cole1994). Different cultivars of the same crop can exhibit different levels of tolerance to a herbicide. A good example of this is the differential tolerance of soybean [Glycine max (L.) Merr.] varieties to metribuzin (Hardcastle Reference Hardcastle1979). Rice varieties also exhibit differential responses to some herbicides. For example, the imidazolinone-tolerant rice cultivars differ in tolerance to imazamox (Bond and Walker Reference Bond and Walker2011), wherein two rice hybrid cultivars exhibited more injury than a long-grain pureline cultivar to an application of imazamox.

Many factors can affect crop tolerance to a herbicide, including herbicide rate, crop growth stage at application, and environmental factors near the time of application. The study by Bond and Walker (Reference Bond and Walker2011) demonstrated cultivar differences in response to a herbicide and the effect of growth stage on injury and yield. Grain yield of hybrid cultivars was reduced 9% to 21% when imazamox was applied 14 d after panicle initiation and at boot, but not when the herbicide was applied at panicle initiation. Differential tolerance of rice cultivars is well documented, with numerous examples of growth stage, herbicide rate, and cultivar.

Environmental conditions surrounding the time of application can influence injury following a herbicide application. In a growth chamber experiment, corn (Zea mays L.) growth was reduced following treatment with thiocarbamate herbicides at a higher temperature regime (Burt and Akinsorotan Reference Burt and Akinsorotan1976). Plant growth was slowed following herbicide treatment, regardless of herbicide rate or soil moisture, at 30 C compared with 20 C. Conversely, in a different study by Wright and Rieck (Reference Wright and Rieck1974), dry weights from various corn hybrids were reduced following an application of butylate when the temperature was 20 C compared with 33 C. Both experiments demonstrate that environmental conditions can influence crop response to a herbicide. Because of the limited knowledge of the response of rice cultivars to florpyrauxifen-benzyl, the objective of these experiments was to consider the effect of florpyrauxifen-benzyl rate, days between sequential applications, temperature (environmental conditions), and growth stage on three rice cultivars.

Materials and Methods

Sequential Applications of Florpyrauxifen-Benzyl

Field experiments were conducted in 2018 at the Pine Tree Research Station (PTRS) near Colt, AR, and the Rice Research and Extension Center (RREC) in Stuttgart, AR, to evaluate the effect of florpyrauxifen-benzyl rate and number of days between applications on injury and grain yield of three rice cultivars. The soil at PTRS was a Calloway silt loam (fine-silty, mixed, active, thermic Aquic Fraglossudalf) with 1.3% organic matter, 10.6% sand, 68.6% silt, and 20.8% clay, pH 7.5 The soil at RREC was a DeWitt silt loam (fine, smectic, thermic typic Albaqualf) with 1.8% organic matter, 8.4% sand, 71.4% silt, and 20.2% clay, pH 6.0.

This experiment was set up as a randomized complete block, two-factor factorial with four replications. The first factor was florpyrauxifen-benzyl rate and the second factor was the number of days between sequential applications. Long-grain pureline cultivar CL111, medium-grain pureline cultivar CL272, and long-grain hybrid cultivar CLXL745 were selected for these studies due to their significant planted acreage in 2016. Rice was drill-seeded on April 19, 2018, at both locations using a 10-row cone drill with 18-cm row spacing. The plots were 5.2 m long. Pureline cultivars were seeded at 72 seeds m−1 per row and the hybrid cultivar was seeded at 26 seeds m−1 per row. A nontreated control in each block was included for each cultivar. These trials were maintained weed-free using labeled herbicides, hand-weeded as necessary, and were managed according to University of Arkansas System Division of Agriculture recommendations for direct-seeded, delayed-flood rice production (Roberts et al. Reference Roberts, Slaton, Wilson and Norman2018). Preflood applications of nitrogen in the form of urea totaling 130 kg N ha−1 were applied at the 5-leaf growth stage at both locations. Muriate of potash (MOP) was applied immediately following emergence at PTRS, and preplant MOP and phosphorous were applied and incorporated prior to planting at RREC.

Florpyrauxifen-benzyl (Loyant™ Herbicide, Dow AgroSciences LLC, Indianapolis, IN) was applied at 30 or 60 g ae ha−1 early POST on 2- to 3-leaf rice. Second applications of florpyrauxifen-benzyl were targeted for 7, 10, 14, and 21 d after the first application, but were actually made 5, 13, 18, and 21 d after the initial application at PTRS and 4, 11, 14, and 20 d after the initial application at RREC. Application dates at PTRS were May 17 for the first application, and May 22, May 30, June 4, and June 7 for the sequential applications. At RREC, the first application was made on May 17 and sequential applications were made on May 21, May 28, May 31, and June 6. The same florpyrauxifen-benzyl rates were used in the sequential application such that plots that received 30 g ae ha−1 early POST also received 30 g ae ha−1 in the sequential application and plots that received 60 g ae ha−1 early POST also received 60 g ae ha−1 in the sequential application. Methylated seed oil was added to all florpyrauxifen-benzyl treatments at 0.6 L ha−1. Herbicide treatments were made using a CO2-pressurized backpack sprayer at 140 L ha−1 with 110015 AIXR nozzles (TeeJet Technologies, Springfield, IL). The flood was established at PTRS on June 2, 2018, and at RREC on May 31, 2018. Visible injury was assessed 2 and 3 wk after the second application on a scale of 0% to 100%, where 0 equals no injury and 100 equals crop death (Frans and Talbert Reference Frans and Talbert1977). Visible injury included leaf malformations, reduced height, and decreased biomass. Additionally, groundcover and yield can be correlated (Donald Reference Donald1998); thus, groundcover was assessed using drone images taken with a DJI Phantom 4 Pro drone equipped with a multispectral camera (Sentera, Minneapolis, MN). Images were taken 1 and 3 wk after the last application at each location from a height of approximately 60 m. Those images consisted of approximately 6.7 million pixels and were analyzed using Field Analyzer (Turf Analyzer, Fayetteville, AR) to calculate the percent of groundcover. Rough rice grain yield was harvested from the center of each plot using a small-plot combine and adjusted to 12% moisture. Groundcover is reported as a percentage of the weed-free nontreated control.

Florpyrauxifen-Benzyl Rate and Temperature

A growth chamber experiment was conducted at the University of Arkansas Altheimer Laboratory in Fayetteville, AR, in autumn 2018 and repeated twice in spring 2019 to determine the effect of different day/night temperatures on injury of rice cultivars following an application of florpyrauxifen-benzyl. Rice was seeded into 10-cm-diameter pots filled with a 50:50 (vol/vol) mixture of field soil and potting mix (Metro-Mix®, Sun Gro Horticulture, Agawam, MA), thinned to one plant per pot, and grown in the greenhouse until plants reached the 2-leaf growth stage. Field soil was a Captina silt loam (Fine-silty, siliceous, active, mesic Typic Fragiudults) with 1.7% organic matter, pH 6.1. The same cultivars in the field experiments were used in this experiment, and nontreated plants were included. This experiment was set up as a split-plot design with temperature as the whole-plot factor and florpyrauxifen-benzyl rate as the split-plot factor. There were three runs in time and five replications per run. Plants were placed in their respective growth chambers at the 2- to 3-leaf growth stage 3 d before herbicide application to allow acclimation. Each chamber was set to 27/18 C and 32/24 C day/night temperature respectively, with a 16-h photoperiod. Light quantity at plant height in both growth chambers was approximately 500 µmol m−2 s−1. Florpyrauxifen-benzyl was applied at a rate of 0 (nontreated), 30, and 60 g ae ha−1 using a two-nozzle boom equipped with 800067 flat-fan nozzles in a spray chamber calibrated to deliver 187 L ha−1. Methylated seed oil was added to all florpyrauxifen-benzyl treatments at 0.6 L ha−1. Plants were returned to their respective growth chamber following application. Injury was assessed 14 and 28 d after application (DAA) on a scale of 0% to 100%, where 0 is no injury and 100 is crop death. Plant heights were recorded 14 and 28 DAA by stretching the plant and measuring the tallest leaf. Tillers were counted and aboveground biomass collected at 28 DAA, then oven dried at 66 C for 4 d and weighed. Heights, tillers, and dry biomass are reported relative to the nontreated plants.

Florpyrauxifen-Benzyl Rate and Growth Stage

A greenhouse experiment was conducted in autumn 2018 and spring 2019 at the University of Arkansas Altheimer Laboratory in Fayetteville, AR, to evaluate the effect of florpyrauxifen-benzyl rate and growth stage on rice injury. The three cultivars used in field and growth chamber experiments were seeded into 10-cm-diameter pots with a 50:50 mixture of field soil and potting mix (Metro-Mix®, Sun Gro Horticulture) and thinned to one plant per pot. Field soil was a Captina silt loam (Fine-silty, siliceous, active, mesic Typic Fragiudults) with 1.7% organic matter, pH 6.1. Plants were grown in the greenhouse at a 32 C daytime and 22 C nighttime (±3 C) temperature regime with a 16-h photoperiod. This experiment was established as a completely randomized design, two-factor factorial, with florpyrauxifen-benzyl rate being one factor and growth stage as the second factor. There were three runs in time with five replications per run, and nontreated plants were included for each cultivar at each growth stage. Florpyrauxifen-benzyl was applied at 30 or 60 g ae ha−1 at the 1-, 3-, or 5-leaf stage and immediately returned to the greenhouse. Applications were made as described previously using the same setup as noted for the growth chamber experiment. Visible injury was assessed 14 and 28 DAA on a 0% to 100% scale for each application timing. Heights were also measured 14 and 28 DAA. Tillers were counted and aboveground biomass was collected at 28 DAA. Heights, tillers, and biomass are reported relative to the nontreated plants.

Statistical Analyses

All data were analyzed using the GLIMMIX procedure in SAS 9.4 (SAS Institute, Cary, NC). Each cultivar in the field experiment was analyzed separately by location because of differences in environmental conditions during and after application, and differences in number of days between sequential applications for both locations. A beta distribution was assumed for injury data (Gbur et al. Reference Gbur, Stroup, McCarter, Durham, Young, Christman, West and Kramer2012). Due to a significant Shapiro-Wilk test, a gamma distribution was assumed for yield and percent groundcover (Gbur et al. Reference Gbur, Stroup, McCarter, Durham, Young, Christman, West and Kramer2012). Because of the large number of zero days delayed in 50% heading, formal analysis was not performed on heading data. Thus, delays in 50% heading data are reported with mean and standard error. Cultivars were also analyzed separately in the greenhouse and growth chamber experiments. Again, a beta distribution was assumed for injury and a gamma distribution was assumed for height, tiller number, and biomass. Replication and runs were considered random effects with replication nested within run. All data were subject to analysis of variance using Fisher’s protected least significant difference (α = 0.05) to separate means when appropriate. P-values from the field experiment are provided in Table 1 and P-values from the growth chamber and greenhouse experiments are provided in Table 2.

Table 1. P-values for the long-grain pureline cultivar CL111, the medium-grain pureline cultivar CL272, and the long-grain hybrid cultivar CLXL745 in 2018 for florpyrauxifen-benzyl rate and lnumber of days between sequential applications. a,b

a Abbreviations: PTRS, Pine Tree Research Station; RREC, Rice Research and Extension Center; WAA, weeks after application.

b Asterisks (*) indicates significance at P = 0.05.

Table 2. P-values for the long-grain pureline cultivar CL111, medium-grain pureline cultivar CL272, and long-grain hybrid cultivar CLXL745 for injury, height, tiller number, and biomass for the growth chamber and greenhouse experiments. a,b

a Abbreviation: DAA, days after application.

b Asterisks (*) indicate significance at P = 0.05.

Results

Long-Grain Pureline Cultivar

The field experiment conducted on CL111 showed florpyrauxifen-benzyl had little effect on this cultivar. In the field experiment, CL111 was injured less than 10% at 3 wk after sequential applications (WAA) of florpyrauxifen-benzyl, regardless of herbicide rate (Table 3). Florpyrauxifen-benzyl did not reduce groundcover relative the nontreated control at 1 or 3 WAA at either location. The delay in 50% heading was no more than 1.5 d and there was no reduction in yield (Table 4).

Table 3. Injury for CL111 in 2018 as influenced by florpyrauxifen-benzyl rate and number of days between sequential applications. a

a Abbreviations: fb, followed by; RREC, Rice Research and Extension Center; WAA, weeks after second application.

b Means are separated using Fisher’s protected least significant difference (α = 0.05). Means with the same letter within a factor and column are not significantly different.

c Florpyrauxifen-benzyl rate is reported in g ae ha−1.

Table 4. Heading and grain yield of the long-grain pureline cultivar CL111. a

a Abbreviations: fb, followed by; PTRS, Pine Tree Research Station; RREC, Rice Research and Extension Center.

b Florpyrauxifen-benzyl rate is reported in g ae ha−1.

c There were no significant differences in delay in 50% heading or grain yield.

d Mean followed by standard error in parenthesis.

e Hyphens (-) represent nontreated delay in heading as zero.

Visible injury in the growth chamber was consistent with the field experiment, with no more than 9% injury 14 DAA (Table 5). Plant heights recorded 28 DAA indicate plants treated with florpyrauxifen-benzyl at 60 g ae ha−1 constituted 16% of the nontreated plants, whereas plants treated with 30 g ae ha−1 constituted 13% of the nontreated plants, averaged over temperature (Table 5). Neither high temperature nor florpyrauxifen-benzyl rate reduced number of tillers or biomass collected 28 DAA (Table 5). This suggests applications of florpyrauxifen-benzyl to CL111 will not have significant or lasting net negative effects.

Table 5. Injury, height, tiller number, and biomass for the long-grain pureline cultivar CL111 as influenced by day/night temperature regime and florpyrauxifen-benzyl rate for the growth chamber experiment and growth stage at application and florpyrauxifen-benzyl rate for the greenhouse experiment. a,b

a Abbreviation: DAA, d after application.

b Means are separated using Fisher’s protected least significant difference (α = 0.05). Means with the same letter within a factor and column are not significantly different. Data not shown for some treatments and variables indicate data is not significant.

c Hyphens (-) represent nontreated data as 0% injury.

d Temperature is reported in celsius (C); florpyrauxifen-benzyl rate is reported in g ae ha-1.

e Height 14 DAA for the nontreated in the 27/18 C growth chamber was 30 cm and 36 cm for the nontreated in the 32/24 C growth chamber. Average number of tillers for the nontreated in both growth chambers was 4. Height at 14 DAA was 38, 41, and 59 cm and at 28 DAA was 45, 47, and 75 cm for 1-, 3-, and 5-leaf growth stages, respectively. Additionally, average number of tillers for the nontreated of all growth stages was 2. Biomass of the nontreated treatments for 1-, 3-, and 5-leaf growth stages at 28 DAA was 0.35 g, 0.60 g, and 1.80 g, respectively.

In the growth stage experiment, 17% injury was observed 14 DAA when florpyrauxifen-benzyl was applied to 1-leaf rice, averaged over rates (Table 5). This was the highest injury observed in the growth stage experiment. The sensitivity of young plants to this herbicide justifies the label restriction of florpyrauxifen-benzyl applications allowed to 2-leaf or larger rice (Anonymous 2017). The levels of injury associated with applications made to 3- and 5-leaf rice are consistent with both the sequential application field experiment and the growth stage experiment, suggesting that florpyrauxifen-benzyl causes low risk for high levels of visible injury to CL111.

There was a reduction from the nontreated plants in height, tiller production, and biomass associated with florpyrauxifen-benzyl treatments in the growth stage experiment (Table 5). Height 14 DAA was reduced from that of nontreated plants when florpyrauxifen-benzyl was applied at the 1-leaf growth stage (Table 5). There was a greater than 20% reduction in tillers associated with applications made to 1-leaf plants, regardless of florpyrauxifen-benzyl rate (Table 5). Florpyrauxifen-benzyl at 60 g ae ha−1 reduced biomass at all growth stages tested, indicating that injury may not always be detected visually (Table 5). Florpyrauxifen-benzyl applied at 30 g ae ha−1 to 1-leaf rice plants also reduced biomass. Due to label restrictions the reductions in height, tillers, and biomass observed when the herbicide is applied at the 1-leaf stage are unlikely to be problematic in production scenarios.

It is possible that differences in the level of injury observed in the temperature and growth stage experiments versus the field experiment are the result of lower light quantity and quality. Sunlight on a clear day in the summer months often exceeds 2,000 µmol m−2 s−1; however, this level of light intensity drastically decreases on a cloudy day, which in turn decreases photosynthesis and herbicide metabolism (Bazzaz and Carlson Reference Bazzaz and Carlson1982). Light quantity in the temperature experiment conducted in the growth chambers was near 500 µmol m−2 s−1. Although light in the greenhouse was supplemented with a light-emitting diode system on a 16-h photoperiod, low light quantity and quality was likely in the greenhouse because the experiment was conducted in winter months. Bond and Walker (Reference Bond and Walker2012) attributed the decrease in the translocation and metabolism of quinclorac in rice to lower solar radiation, or light intensity. Furthermore, Pritchard and Warren (Reference Pritchard and Warren1980) documented a reduction in tomato (Solanum lycopersicum L.), velvetleaf (Abutilon theophrasti Medik.), and jimsonweed (Datura stramonium L.) tolerance to metribuzin when plants were shaded prior to herbicide application. In that study, light intensity was reduced 76% by using a shade cloth, which simulates light conditions on a moderately cloudy day (Pritchard and Warren Reference Pritchard and Warren1980). The study by Prichard and Warren (Reference Pritchard and Warren1980) also attributed reduced herbicide metabolism to a reduction in photosynthesis. Thus, the low light intensity conditions observed in the greenhouse and growth chamber studies conducted in this research likely affected florpyrauxifen-benzyl metabolism, leading to a decrease in height and biomass.

Based on these three experiments, we conclude that the long-grain pureline cultivar CL111 exhibits sufficient tolerance to florpyrauxifen-benzyl. Low levels of visible injury, little impact on groundcover, no more than a 1.5-d delay in heading, and no yield loss lead to the conclusion that sequential applications of florpyrauxifen-benzyl do not cause serious, lasting impacts on CL111 when applied at the 2-leaf growth stage with a minimum of 14 d between applications.

Medium-Grain Pureline Cultivar

Injury to CL272 was no more than 11% at PTRS at 3 WAA, whereas up to 50% injury was observed at RREC (Table 6). At RREC, applications made 14 d apart, the minimum length of time required by the label, resulted in only 15% injury (Table 6). Florpyrauxifen-benzyl applied more than 20 d apart injured rice by less than 5%. Yield of CL272 was not reduced at either site, which is not surprising considering there was no more than a 3-d delay in 50% heading (Table 7).

Table 6. Injury for the medium-grain pureline cultivar CL272 in 2018 as influenced by florpyrauxifen-benzyl rate and number of days between sequential applications. a

a Abbreviations: fb, followed by; PTRS, Pine Tree Research Station; RREC, Rice Research and Extension Center; WAA, weeks after second application.

b Means are separated using Fisher’s protected least significant difference (α = 0.05). Means with the same letter within a factor and column are not significantly different.

c Florpyrauxifen-benzyl rate is reported in g ae ha−1.

Table 7. Heading and grain yield of the medium-grain pureline cultivar CL272. a

a Abbreviations: fb, followed by; PTRS, Pine Tree Research Station; RREC, Rice Research and Extension Center.

b Florpyrauxifen-benzyl rate is reported in g ae ha−1.

c Mean followed by standard error in parenthesis.

d There were no significant differences in delay in 50% heading or grain yield.

e Hyphens (-) represent nontreated delay in heading as zero.

f Grain yiled is reported in kg ha−1.

Injury of CL272 rice in the temperature experiment was consistent with injury at PTRS in the field experiment (Table 8). Although little injury was observed, height and biomass were reduced by florpyrauxifen-benzyl. Generally, height and biomass were reduced at least 20% and 13%, respectively, compared with control plants, regardless of rate and temperature (Table 8).

Table 8. Injury and height for the medium-grain pureline cultivar CL272 in the grow chamber experiment as influenced by day/night temperature regime and florpyrauxifen-benzyl rate and by growth stage and florpyrauxifen-benzyl rate in the greenhouse experiment. a

a Abbreviation: DAA, d after application.

b Means are separated using Fisher’s protected least significant difference (α=0.05). Means with the same letter within a factor and column are not significantly different. Data not shown for some treatments and variables indicate data is not significant.

c Hyphens (-) represent nontreated data as 0% injury.

d Height and biomass collected at 28 DAA for the nontreated of the 27/18 C growth chamber was 35 cm, 4, and 1.80 g, respectively, and for the nontreated of the 32/24 C growth chamber 44 cm, 3, and 1.60 g, respectively. Height 14 DAA was 51, 55, and 67 cm and 28 DAA was 60, 61, and 82 cm for the nontreated of 1-, 3-, and 5-leaf growth stages. Biomass for the nontreated at the 1-, 3-, and 5-leaf growth stages was 0.40 g, 0.95 g, and 1.60 g at 28 DAA, respectively in the greenhouse experiment.

e Temperature is reported in celsius (C); florpyrauxifen-benzyl rate is reported in g ae ha-1

In the greenhouse experiment, injury to CL272 at 14 DAA was highest when applied to 1-leaf plants (46%) when averaged over florpyrauxifen-benzyl rate, with injury generally decreasing as applications were delayed (Table 8). Although injury in this experiment was higher than observed in the field and growth chamber experiments, it was expected because applications in those experiments were made to 2- to 3-leaf rather than 1-leaf rice. In a weed control experiment by Teló et al. (Reference Teló, Webster, McKnight, Blouin and Rustom2018), fall panicum control (Panicum dichotomiflorum Michx.) was higher when florpyrauxifen-benzyl was applied at 30 g ae ha−1 to 3- to 4-leaf rice as opposed to larger, 1- to 2-tiller rice. This may be applied to rice as well, although rice is more tolerant to florpyrauxifen-benzyl than fall panicum. When rice plants are small, they will be more affected by an application of florpyrauxifen-benzyl than when plants are larger, likely due to an increase in plant growth and metabolism.

Additionally, there was no reduction in rice height 14 DAA from any treatment, except those applied to 1-leaf rice (Table 8). As in the temperature experiment, biomass of plants treated with florpyrauxifen-benzyl was significantly reduced from the nontreated plants; biomass of plants treated with 30 g ae ha−1 was 74% of nontreated plants, and biomass from plants treated with 60 g ae ha−1 was 62% of nontreated plants, averaged over growth stage (Table 8).

These results indicate that CL272 can potentially recover from early-season injury. However, considering the high level of injury at RREC, growers should abide by the 14-d interval between applications to minimize potential negative effects on the rice crop. Based on these data, injury appears to be exacerbated by warmer temperatures; however, plants recover more quickly under relatively warmer compared to cooler temperatures. This was observed in the field experiment at RREC, a period of warm temperatures between May 29 and June 4 (average high temperature 33 C) caused greater than expected injury from applications made May 28 and 31 (Table 6; Figure 1A and 1B).

Figure 1. Daily minimum, maximum, and average temperatures (A) at the Pine Tree Research Station (PTRS) near Colt, AR, in 2018 and (B) the Rice Research and Extension Center (RREC) near Stuttgart, AR, in 2018 for dates ranging from 7 d before first florpyrauxifen-benzyl application to 14 d after the second application. Rice cultivars CL111, CL272, and CLXL745 were planted on April 19, 2018, at PTRS and RREC. The first florpyrauxifen-benzyl application was made to 2- to 3-leaf rice on May 17, 2018, at both locations. Sequential applications were made May 22, May 30, June 4, and June 7 at PTRS and May 21, May 28, May 31, and June 6 at RREC. Application dates are indicated by an arrow.

Long-Grain Hybrid Cultivar

At PTRS, CLXL745 injury 3 wk after florpyrauxifen-benzyl was applied 5 d apart was 34%, averaged over herbicide rate. However, applications made 4 d apart at RREC resulted in 64% injury when averaged over herbicide rate (Table 9). Injury decreases as there is more time between sequential applications; however, at RREC 17% injury was still observed 3 WAA when applications were made 14 d apart, averaged over rate (Table 9).

Table 9. Injury for the long-grain rice hybrid cultivar CLXL745 in 2018 as influenced by florpyrauxifen-benzyl rate and number of days between sequential applications. a , b

a Abbreviations: fb, followed by; PTRS, Pine Tree Research Station; RREC, Rice Research and Extension Center; WAA, weeks after second application.

b Means are separated using Fisher’s protected least significant difference (α = 0.05). Means with the same letter within a factor and column are not significantly different.

c Florpyrauxifen-benzyl rate is reported in g ae ha−1.

There was a significant reduction in CLXL745 rice groundcover relative to the nontreated control 1 WAA at both locations (P = 0.0008 at PTRS, P < 0.0001 at RREC). At PTRS, sequential applications of florpyrauxifen-benzyl at 60 g ae ha−1 made 5 d and 13 d apart resulted in 47% and 76% groundcover relative to the nontreated control, respectively, whereas sequential applications of 60 g ae ha−1 made 4 d apart resulted in 29% groundcover (Table 10).

Table 10. Heading and grain yield of the long-grain rice hybrid cultivar CLXL745. a

a Abbreviations: fb, followed by; PTRS, Pine Tree Research Center; RREC, Rice Research and Extension Center.

b Percent groundcover for the nontreated was 82% and 88%, respectively, at PTRS and RREC.

c Means followed by standard error in parenthesis.

d Means are separated using Fisher’s protected least significant difference (α = 0.05). Means with the same letter within a factor and column are not significantly different.

e Hyphens (-) represent nontreated delay in heading as zero.

Rough rice grain yields for most treatments were significantly reduced from the nontreated control, even in treatments where label directions were followed (Table 10). At PTRS, CLXL745 grain yields following treatments where florpyrauxifen-benzyl was applied sequentially at 30 g ae ha−1 18 d apart or 60 g ae ha−1 21 d apart were not significantly less than those of the nontreated controls. Additionally, at RREC, applications made 4 d apart at both rates were not significantly less than those applied to the nontreated controls. This could be due to rice plants having additional time to recover from injury before harvest compared to the other treatments, however because this is inconsistent with results from PTRS, further research is needed to confirm this. Yield reduction from herbicide applications has been observed in other studies as well. Mid-season herbicide injury from quinclorac has been shown to reduce yield up to 19% for another hybrid cultivar, ‘XL723’ (Bond and Walker Reference Bond and Walker2012). Yield reductions coupled with injury data lead to the conclusion that CLXL745 is particularly sensitive to sequential applications of florpyrauxifen-benzyl.

In the growth chamber experiment, injury was 25% at 14 DAA for florpyrauxifen-benzyl at 60 g ae ha−1 applied to plants maintained at 32/24 C (Table 11). By 28 DAA, no more than 10% injury was observed, indicating that plants had begun to recover. Recovery is also reflected in heights of CLXL745 at 28 DAA, when heights of plants treated with florpyrauxifen-benzyl in the 32/24 C growth chamber were not different than those of nontreated plants (Table 11). Heights of treated plants, regardless of rate, were reduced from nontreated plants in the 27/18 C growth chamber; however, this difference was numerically small (Table 11). This suggests that plants may recover more quickly under warmer growing conditions. Because differences were slight, temperature appears to have a minimal effect on hybrid recovery from florpyrauxifen-benzyl injury. Additionally, biomass was reduced for plants treated with florpyrauxifen-benzyl for both rates when averaged over temperature, further suggesting that CLXL745 is sensitive to florpyrauxifen-benzyl.

Table 11. Injury and height for the long-grain rice hybrid cultivar CLXL745 in the growth chamber experiment as influenced by day/night temperature regime and florpyrauxifen-benzyl rate and florpyrauxifen-benzyl rate and by growth stage and florpyrauxifen-benzyl rate in the greenhouse experiment. a

a Abbreviation: DAA, d after application.

b Means are separated using Fisher’s protected least significant difference (α = 0.05). Means with the same letter within a factor and column are not significantly different. Data not shown for some treatments and variables indicate data is not significant.

c Hyphens (-) represent nontreated data as 0% injury.

d Height 28 DAA for the nontreated of the 27/18 C growth chamber was 49 cm and 42 cm for the nontreated of the 32/24 C growth chamber. Height 14 DAA was 45, 54, and 64 cm and 28 DAA was 56, 61, and 78 cm for the nontreated s of 1-, 3-, and 5-leaf growth stages. Biomass for the nontreated s at the 1-, 3-, and 5-leaf growth stages was 0.70 g, 1.50 g, and 2.10 g at 28 DAA, respectively in the greenhouse experiment.

e Temperature is reported in celsius (C); florpyrauxifen-benzyl rate is reported in g ae ha-1.

Injury in the greenhouse experiment was highest 14 DAA when florpyrauxifen-benzyl was applied at 60 g ae ha−1 to 1- and 3-leaf rice plants, (43% and 30% injury, respectively; Table 11). By 28 DAA, injury was highest for plants treated at 1-leaf and 3-leaf stages averaged over rate, with 27% and 18%, respectively, whereas injury to plants treated at the 5-leaf stage was only 5% (Table 11). There was a height reduction 28 DAA in plants treated at the 5-leaf growth stage, which can be attributed to a shift in resources due to tillering (Table 11). There was also a reduction in height for plants treated with the 60 g ae ha−1 rate at the 1-leaf and 3-leaf stages. Biomass was reduced only in rice treated with florpyrauxifen-benzyl applied at 60 g ae ha−1 averaged over growth stage (P = 0.0003; Table 11). These data suggest that larger rice plants can metabolize and detoxify florpyrauxifen-benzyl better than when plants are smaller; however, florpyrauxifen-benzyl is still injurious to CLXL745, resulting in height and biomass reduction.

These experiments lead to the conclusion that a single application of florpyrauxifen-benzyl, especially at the standard field rate of 30 g ae ha−1, can be utilized on CLXL745 when plants are larger than 1 leaf. However, florpyrauxifen-benzyl applied sequentially to CLXL745 can reduce grain yields.

Discussion

It is important to note that most biomass collected from plants treated with florpyrauxifen-benzyl was reduced from that of nontreated plants, which is seemingly in contrast to data from the field experiment. Plants had several months to recover from florpyrauxifen-benzyl injury, whereas plants in the growth chamber had only 1 mo to recover from the herbicide application before biomass was collected. Additionally, the herbicide may have been metabolized more slowly in these the growth chamber and greenhouse experiments because of the low light. Research conducted using 2,4-D, another auxinic herbicide, showed that by increasing the light intensity, translocation of the herbicide increased (Schultz and Burnside Reference Schultz and Burnside1980). Further research is needed to evaluate the effect of light quantity and quality on the propensity of florpyrauxifen-benzyl to injure rice. This could be significant because several cloudy days immediately followed an application of florpyrauxifen-benzyl to rice, which could have reduced plant vigor, resulting in lower yields and greater weed pressure due to reduced groundcover (Norsworthy Reference Norsworthy2004).

Because a symptom of florpyrauxifen-benzyl injury is leaf malformation, this may be a contributing factor to the reduction in biomass we observed. Additionally, stalk strength is an important factor in rice lodging resistance (Kashiwagi et al. Reference Kashiwagi, Togawa, Hirotsu and Ishimaru2008; Zuber et al. Reference Zuber, Winzeler, Messmer, Keller, Keller, Schmid and Stamp2001), and damaged stems could cause rice to lodge. Further research is necessary to explore whether there is an increased risk of lodging when florpyrauxifen-benzyl is applied to CLXL745, since this cultivar was most injured by the herbicide.

These experiments explored various factors that could affect injury and rice yield; however, the herbicide label indicates that florpyrauxifen-benzyl may be applied at 30 g ae ha−1 per application, with two applications allowed per season to 2-leaf or larger rice, and a minimum of 14 d between applications (Anonymous 2017). The label also warns that medium-grain varieties and long-grain hybrid cultivars are more sensitive to florpyrauxifen-benzyl, and the findings in these experiments for the medium-grain pureline cultivar CL272 and long-grain hybrid cultivar CLXL745 support the label recommendations. This was also observed by Pantone and Baker (Reference Pantone and Baker1992) with injury from triclopyr at 800 g ha−1 applied to different cultivars. Montgomery et al. (Reference Montgomery, Bond, Golden, Gore, Edwards, Eubank and Walker2014) reported that hybrid cultivar CLXL745 and medium-grain varieties ‘Caffey’ and ‘CL261’ were more sensitive to saflufenacil and carfentrazone than two long-grain cultivars.

Rice growers should expect some level of injury when florpyrauxifen-benzyl is applied sequentially to CL272 and CLXL745. Based on the findings in these experiments for CLXL745, sequential applications of florpyrauxifen-benzyl are not recommended. Because CLXL745 is particularly sensitive to florpyrauxifen-benzyl, further research should be conducted on other hybrid cultivars.

Acknowledgments

This research was funded by the Arkansas Rice Promotion Board and Corteva. No conflicts of interest are reported.

Footnotes

Associate Editor: Jason Bond, Mississippi State University

References

Anonymous (2017) Loyant™ Herbicide Product Label. Dow Agriscience Publication 010-02342. Indianapolis, IN: Dow Agriscience. 5 pGoogle Scholar
Bazzaz, FA, Carlson, RW (1982) Photosynthetic acclimation to variability in the light environment of early and late successional plants. Oecologia 54:313316 CrossRefGoogle ScholarPubMed
Bond, JA, Walker, TW (2012) Effect of postflood quinclorac applications on commercial rice cultivars. Weed Technol 26:183188 CrossRefGoogle Scholar
Bond, JA, Walker, TW (2011) Differential tolerance of Clearfield rice cultivars to imazamox. Weed Technol 25:192197 CrossRefGoogle Scholar
Burt, GW, Akinsorotan, AO (1976) Factors affecting thiocarbamate injury to corn. I. Temperature and soil moisture. Weed Sci 24:319321 CrossRefGoogle Scholar
Cole, DJ (1994) Detoxification and activation of agrochemicals in plants. Pestic Sci 42:209222 CrossRefGoogle Scholar
Donald, WW (1998) Estimated soybean (Glycine max) yield loss from herbicide damage using ground cover or rated stunting. Weed Sci 46:454458 CrossRefGoogle Scholar
Frans, RE, Talbert, R (1977) Design of field experiment and the measurement and analysis of plant response. Pages 1523 in Research Methods in Weed Science. Auburn, AL: Southern Weed Science Society Google Scholar
Gbur, EE, Stroup, WW, McCarter, KS, Durham, S, Young, LJ, Christman, M, West, M, Kramer, M (2012) Analysis of generalized linear mixed models in the agricultural and natural resources sciences. Madison, WI: American Society of Agronomy, Soil Science Society of America, Crop Science Society of America. 298 pp CrossRefGoogle Scholar
Hardcastle, WS (1979) Soybean (Glycine max) cultivar response to metribuzin in solution culture. Weed Sci 27:278279 CrossRefGoogle Scholar
Hardke, J (2018) Introduction. Pages 18 in Misc Pub 192. Little Rock: University of Arkansas Cooperative Extension Service Google Scholar
Kashiwagi, T, Togawa, E, Hirotsu, N, Ishimaru, K (2008) Improvement of lodging resistance with QTLs for stem diameter in rice (Oryza sativa L.). Theor Appl Genet 117:749757 CrossRefGoogle Scholar
Lee, S, Sundaram, S, Armitage, L, Evans, JP, Hawkes, T, Kepinski, S, Ferro, N, Napier, RM (2014) Defining binding efficiency and specificity of auxins for SCFTIR1/AFB_ AUX/IAA co-receptor complex formation. ACS Chem Biol 9:673682 CrossRefGoogle Scholar
Miller, MR, Norsworthy, JK (2018b) Assessment of florpyrauxifen-benzyl potential to carryover to subsequent crops. Weed Technol 32:404409 CrossRefGoogle Scholar
Miller, MR, Norsworthy, JK (2018a) Florpyrauxifen-benzyl weed control spectrum and tank-mix compatibility with other commonly applied herbicides in rice. Weed Technol 32:319325 CrossRefGoogle Scholar
Miller, MR, Norsworthy, JK, Scott, RC (2018) Evaluation of florpyrauxifen-benzyl on herbicide-resistant and herbicide susceptible barnyardgrass accessions. Weed Technol 32:126134 CrossRefGoogle Scholar
Montgomery, GB, Bond, JA, Golden, BR, Gore, J, Edwards, HM, Eubank, TW, Walker, TW (2014) Response of commercial rice cultivars to postemergence applications of saflufenacil. Weed Technol 28:679684 CrossRefGoogle Scholar
Norsworthy, JK (2004) Soybean canopy formation effects on pitted morningglory (Ipomoea lacunosa), common cocklebur (Xanthium strumarium), and sicklepod (Senna obtusifolia) emergence. Weed Sci 52:954960 CrossRefGoogle Scholar
Pantone, DJ, Baker, JB (1992) Varietal tolerance of rice (Oryza sativa) to bromoxynil and triclopyr at different growth stages. Weed Technol 6:968974 CrossRefGoogle Scholar
Pritchard, MK, Warren, GF (1980) Effect of light in the response of tomato (Lycopersicon esculentum) and two weed species to metribuzin. Weed Sci 28:186189 CrossRefGoogle Scholar
Roberts, TR, Slaton, NA, Wilson, CE Jr, Norman, RJ (2018) Soil Fertility. Pages 69102 in Misc Pub 192. Little Rock: University of Arkansas Cooperative Extension Service Google Scholar
Schultz, ME, Burnside, OC (1980) Absorption, translocation, and metabolism of 2,4-D and glyphosate in hemp dogbane (Apocynum cannabinum). Weed Sci 28:1320 CrossRefGoogle Scholar
Teló, GM, Webster, EP, McKnight, BM, Blouin, DC, Rustom, SY Jr (2018) Activity of florpyrauxifen-benzyl on fall panicum (Panicum dichotomiflorum Michx.) and Nealley’s sprangletop (Leptochloa nealleyi Vasey). Weed Technol 32:603607 CrossRefGoogle Scholar
[USDA-NASS] US Department of Agriculture–National Agricultural Statistics Service (2019) Rice Acres Harvested in 2018. https://quickstats.nass.usda.gov/results/92C1218E-52A2-3A76-A440-AA4726944E00 Accessed: October 6, 2019Google Scholar
Walsh, TA, Nela, R, Merlo, AO, Honma, M, Hicks, GR, Wolff, K, Matsumura, W, Davies, JP (2006) Mutations in an auxin receptor homolog AFB5 and in SGT1b confer resistance to synthetic picolinate auxins and not to 2,4-dichlorophenoxyacetic acid or indole-3-acetic acid in Arabidopsis. Plant Physiol 142:542552 Google ScholarPubMed
Wright, TH, Rieck, CE (1974) Factors affecting butylate injury to corn. Weed Sci 22:8385 CrossRefGoogle Scholar
Zhang, W, Webster, EP (2002) Shoot and root growth of rice (Oryza sativa) in response to V-10029. Weed Technol 16:768 CrossRefGoogle Scholar
Zuber, U, Winzeler, H, Messmer, MM, Keller, M, Keller, B, Schmid, JE, Stamp, P (2001) Morphological trails associated with lodging resistance of spring wheat (Triticum aestivum L.). J Agron Crop Sci 182:1724 CrossRefGoogle Scholar
Figure 0

Table 1. P-values for the long-grain pureline cultivar CL111, the medium-grain pureline cultivar CL272, and the long-grain hybrid cultivar CLXL745 in 2018 for florpyrauxifen-benzyl rate and lnumber of days between sequential applications.a,b

Figure 1

Table 2. P-values for the long-grain pureline cultivar CL111, medium-grain pureline cultivar CL272, and long-grain hybrid cultivar CLXL745 for injury, height, tiller number, and biomass for the growth chamber and greenhouse experiments.a,b

Figure 2

Table 3. Injury for CL111 in 2018 as influenced by florpyrauxifen-benzyl rate and number of days between sequential applications.a

Figure 3

Table 4. Heading and grain yield of the long-grain pureline cultivar CL111.a

Figure 4

Table 5. Injury, height, tiller number, and biomass for the long-grain pureline cultivar CL111 as influenced by day/night temperature regime and florpyrauxifen-benzyl rate for the growth chamber experiment and growth stage at application and florpyrauxifen-benzyl rate for the greenhouse experiment.a,b

Figure 5

Table 6. Injury for the medium-grain pureline cultivar CL272 in 2018 as influenced by florpyrauxifen-benzyl rate and number of days between sequential applications.a

Figure 6

Table 7. Heading and grain yield of the medium-grain pureline cultivar CL272.a

Figure 7

Table 8. Injury and height for the medium-grain pureline cultivar CL272 in the grow chamber experiment as influenced by day/night temperature regime and florpyrauxifen-benzyl rate and by growth stage and florpyrauxifen-benzyl rate in the greenhouse experiment.a

Figure 8

Figure 1. Daily minimum, maximum, and average temperatures (A) at the Pine Tree Research Station (PTRS) near Colt, AR, in 2018 and (B) the Rice Research and Extension Center (RREC) near Stuttgart, AR, in 2018 for dates ranging from 7 d before first florpyrauxifen-benzyl application to 14 d after the second application. Rice cultivars CL111, CL272, and CLXL745 were planted on April 19, 2018, at PTRS and RREC. The first florpyrauxifen-benzyl application was made to 2- to 3-leaf rice on May 17, 2018, at both locations. Sequential applications were made May 22, May 30, June 4, and June 7 at PTRS and May 21, May 28, May 31, and June 6 at RREC. Application dates are indicated by an arrow.

Figure 9

Table 9. Injury for the long-grain rice hybrid cultivar CLXL745 in 2018 as influenced by florpyrauxifen-benzyl rate and number of days between sequential applications.a,b

Figure 10

Table 10. Heading and grain yield of the long-grain rice hybrid cultivar CLXL745.a

Figure 11

Table 11. Injury and height for the long-grain rice hybrid cultivar CLXL745 in the growth chamber experiment as influenced by day/night temperature regime and florpyrauxifen-benzyl rate and florpyrauxifen-benzyl rate and by growth stage and florpyrauxifen-benzyl rate in the greenhouse experiment.a