Hostname: page-component-8448b6f56d-m8qmq Total loading time: 0 Render date: 2024-04-24T14:31:03.121Z Has data issue: false hasContentIssue false
  • English
  • Français

Transformation-induced plasticity in Fe–Cr–V–C

Published online by Cambridge University Press:  31 January 2011

Uta Kühn ,
Jan Romberg ,
Norbert Mattern ,
Horst Wendrock  and
Jürgen Eckert
Horst Wendrock
Affiliation:
IFW Dresden, Institute for Complex Materials, D-01171 Dresden, Germany
Jürgen Eckert*
Affiliation:
IFW Dresden, Institute for Complex Materials, D-01171 Dresden, Germany; and Technical University (TU) Dresden, Institute of Materials Science, D-01062 Dresden, Germany
*
b)This author was an editor of this journal during the review and decision stage. For the JMR policy on review and publication of manuscripts authored by editors, please refer to http://www.mrs.org/jmr_policy
Get access

Abstract

On the basis of the Fe84.3C4.6Cr4.3Mo4.6V2.2 high-speed tool steel, manufactured under relatively high cooling rates and highly pure conditions, a further improvement of the mechanical characteristics by slight modification of the alloy composition was attempted. For this, the alloy Fe88.9Cr4.3V2.2C4.6 was generated by elimination of Mo. By applying special preparation conditions, a microstructure composed of martensite, retained austenite, and a fine network of special carbides was obtained already in the as-cast state. This material exhibits extremely high compression strength of over 5000 MPa combined with large compression strain of more than 25% due to deformation-induced martensite formation. With this alloy a new composition of transformation-induced plasticity-assisted steels was found, which shows an extreme mechanical loading capacity.

Keywords

CastingCompositeMicrostructure
Type
Articles
Information
Journal of Materials Research , Volume 25 , Issue 2 , February 2010 , pp. 368 - 374
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Krauss, G., Pickering, F.B., Rayson, H.W.Constitution and properties of steelsMaterials Science and Technology edited by R.W. Cahn P. Haasen and E.J. Kramer Vol. 7 (Wiley-VCH Verlag, Weinheim, Germany 2005)3736Google Scholar
2.Scheil, E.Über die Umwandlung des Austenits in Martensit in Eisen-Nickel-Legierungen unter Belastung. Z. Anorg. Allg. Chem. 207, 21 (1932)CrossRefGoogle Scholar
3.Patel, J.R., Cohen, M.Criterion for the action of applied stress in the martensitic transformation. Acta Metall. 1, 531 (1953)CrossRefGoogle Scholar
4.Angel, T.Formation of martensite in austenitic stainless steels. J. Iron Steel Inst. 177, 165 (1954)Google Scholar
5.Bhadeshia, H.K.D.H.Theory of significance of retained austenite in steels. Ph.D. Thesis, University of Cambridge, Cambridge, UK 1979Google Scholar
6.Jacques, P.J., Cornet, X., Harlet, P., Ladrière, J., Delannay, F.Enhancment of the mechanical properties of a low-carbon, low-silicon steel by formation of a multiphased microstructure containing retained austenite. Metall. Trans. A 29, 2383 (1998)CrossRefGoogle Scholar
7.Muránsky, O., Sittner, P., Zrník, J., Oliver, E.C.In situ neutron diffraction investigation of the collaborative deformation-transformation mechanism in TRIP-assisted steels at room and elevated temperatures. Acta Mater. 56, 3367 (2008)CrossRefGoogle Scholar
8.Olson, G.B., Azrin, M.Transformation behavior of TRIP steels. Metall. Trans. A 9, 713 (1978)CrossRefGoogle Scholar
9.Zackay, V.F., Parker, E.R., Fahr, D., Bush, R.The enhancement of ductility in high- strength steels. Trans. Am. Soc. Met. 60, 252 (1967)Google Scholar
10.Matsumura, O., Sakuma, Y., Takechi, H.TRIP and its kinetic aspects in austempered 0.4C–1.5Si–0.8Mn steel. Scr. Metall. 27, 1301 (1987)CrossRefGoogle Scholar
11.Tomota, Y., Tokuda, H., Adachi, Y., Wakita, M., Minakawa, N., Moriai, A., Morii, Y.Tensile behavior of TRIP-aided multi-phase steels studied by in situ neutron diffraction. Acta Mater. 52, 5737 (2004)CrossRefGoogle Scholar
12.Jacques, P.J.Transformation-induced plasticity for high strength formable steels. Curr. Opin. Solid State Mater. Sci. 8, 259 (2004)CrossRefGoogle Scholar
13.Kruijver, S., Zhao, L., Sietsma, J., Offermann, E., van Dijk, N.In situ observations on the austenite stability in TRIP-steel during tensile testingProc. International Conference on TRIP-Aided High Strength Ferrous Alloys Vol. 1 (Druck and Verlag, Mainz, Germany 2002)Google Scholar
14.Jacques, P.J., Furnémont, Q., Lani, F., Pardoen, T., Delannay, F.Multiscale mechanics of TRIP-assisted multiphase steels: I. Characterization and mechanical testing. Acta Mater. 55, 3681 (2007)CrossRefGoogle Scholar
15.Bhadeshia, H.K.D.H.TRIP-assisted steels? ISIJ Int. 42, 1059 (2002)CrossRefGoogle Scholar
16.Kühn, U., Mattern, N., Gemming, T., Siegel, U., Werniewicz, K., Eckert, J.Superior mechanical properties of FeCrMoVC. Appl. Phys. Lett. 90, 261901 (2007)CrossRefGoogle Scholar
17.Srivastava, R.M., Eckert, J., Löser, W., Dhindaw, B.K., Schultz, L.Cooling rate evaluation for bulk amorphous alloys from eutectic microstructures in casting processes. Mater. Trans., JIM 43, 1670 (2002)CrossRefGoogle Scholar
18.Pearson, W.B.Handbook of Lattice Spacings and Structures of Metals and Alloys Vol. 8 (Pergamon Press, London 1958)Google Scholar
19.Werniewicz, K., Kühn, U., Mattern, N., Bartusch, B., Eckert, J., Das, J., Schultz, L., Kulik, T.New Fe–Cr–Mo–Ga–C composites with high compressive strength and large plasticity. Acta Mater. 55, 3513 (2007)CrossRefGoogle Scholar
20.Massalski, T.B., Okamoto, H., Subramanian, P.R., Kacprzak, L.Binary Alloy Phase Diagrams (ASM International, Materials Park, OH 1990)Google Scholar
21.Mughrabi, H., Gil Sevillano, J., Neuhäuser, H., Schwink, C., Reppich, B.Plastic deformation and fracture of materialsMaterials Science and Technology edited by R.W. Cahn P. Haasen and E.J. Kramer Vol. 6 (Wiley-VCH Verlag, Weinheim, Germany 2005)3357Google Scholar
22.Sherif, M.Y., Garcia-Mateo, C., Sourmail, T., Bhadeshia, H.K.D.H.Stability of retained austenite in TRIP-assisted steels. Mater. Sci. Technol. 20, 319 (2004)CrossRefGoogle Scholar