Hostname: page-component-76fb5796d-22dnz Total loading time: 0 Render date: 2024-04-25T23:01:22.128Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical evaluation of FP alumina reinforced NiAl Composites

Published online by Cambridge University Press:  15 February 2011

D. L. Anton  and
D. M. Shah
D. L. Anton
Affiliation:
United Technologies Research Center, E. Hartford, CT 06084
D. M. Shah
Affiliation:
Pratt & Whitney, E. Hartford, CT 06084
Get access

Abstract

NiAl is well known for its low density, superb oxidation resistance and low ductile to brittle transition temperature. It is equally renowned for its low room temperature fracture strength and poor high temperature creep strength. A compositing approach has been used to introduce chopped and aligned FP Al2O3 into a matrix of fine grain NiAl via a powder metallurgical approach. This resulted in composites with approximately 40 vol. per cent undamaged alumina reinforcement. Fiber orientation effects on strength have also been characterized. Room temperature tests resulted in yield strength increases of 425% for chopped FP reinforcements and 800% for aligned composites. Elevated temperature tests conducted at 1200°C were even more dramatic in their strength increment with 200% and 3600% increases respectively. Fractographic results show matrix ductility, fiber-matrix decohesion and minimal fiber pull-out.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 273: Symposium Q – Intermetallic Matrix Composites II , 1992 , 157
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Marshal, D.B. and Evans, A.G., J. Am. Ceramic Soc., 68(5), 225, (1985).CrossRefGoogle Scholar
2. Rice, R.W., Ceramic Eng. Sci. Proc., 2(7–8), 661, (1981).CrossRefGoogle Scholar
3. Polvani, R.S., Ruff, A.W. and Strutt, P.R., J. Mat. Sci. Letters, 3, 287, (1984).CrossRefGoogle Scholar
4. Noebe, R.D., Bowman, R.R. and Eldridge, J.I., in Intermetallic Matrix Composites, Anton, D.L. et. al. eds., MRS, Pittsburgh, PA, p. 323, 1990.Google Scholar
5. Shah, D.M., Anton, D.L. and Musson, C.W., in Intermetallic Matrix Composites, Anton, D.L. et. al. eds., MRS, Pittsburgh, PA, p. 333, 1990.Google Scholar
6. Anton, D.L. and Shah, D.M., in Intermetallic Comnounds-Structure and Mechanical Properties, O. Izumi ed., Japan Inst. of Metals, Sendai, Japan, (1991) p. 379.Google Scholar
7. Stephens, J.R., in High Temverature Ordered Intermetallic Alloys, Koch, C.C. et. al. eds., MRS, Pittsburgh, PA, (1985), p. 381.Google Scholar