Hostname: page-component-8448b6f56d-xtgtn Total loading time: 0 Render date: 2024-04-18T23:52:48.617Z Has data issue: false hasContentIssue false

Thermal Desorption for Mercury Removal from Sediments Sampled from the Adriatic Sea

Published online by Cambridge University Press:  31 October 2005

Daniele Benotti
Affiliation:
Department of Chemical, Material, Raw Material and Metallurgical Engineering, University of Rome “La Sapienza,” Italy
Massimo Delfini
Affiliation:
Department of Chemical, Material, Raw Material and Metallurgical Engineering, University of Rome “La Sapienza,” Italy
Mauro Ferrini
Affiliation:
Department of Chemical, Material, Raw Material and Metallurgical Engineering, University of Rome “La Sapienza,” Italy
Floriana La Marca
Affiliation:
Department of Chemical, Material, Raw Material and Metallurgical Engineering, University of Rome “La Sapienza,” Italy
Paolo Massacci
Affiliation:
Department of Chemical, Material, Raw Material and Metallurgical Engineering, University of Rome “La Sapienza,” Italy
Luigi Piga
Affiliation:
Department of Chemical, Material, Raw Material and Metallurgical Engineering, University of Rome “La Sapienza,” Italy
Paolo Colosimo
Affiliation:
Department of Materials and Earth Sciences, University of Ancona, Italy
Get access

Abstract

Overall sampling of the sediments in the Adriatic Sea at the mouth of the Isonzo (Soça) River in Italy has permitted updating of the extent and level of mercury contamination. The lsonzo River transports mercury-bearing residues from the ldrija mine (Slovenia); that area is contaminated due to the mining of cinnabar (HgS). The mercury mine started operations in the 15th century and was finally shut down in the 1980s because of the decreased demand for mercury. An attempt was made to remove mercury from the contaminated sediments by thermal desorption, with the aim of ascertaining whether low temperature and short residence time could be suitable parameters for sediment cleanup if future needs should so require. To date, no studies have been done on the health of the Italian population living in the Gulf of Trieste area; hence there is no known correlation between the anomalous mercury content of the sediments and symptoms attributable to the ingestion of even small quantities of mercury. Desorption times of about 20 to 30 minutes, at temperatures ranging from 325° C to 350° C, yielded residues with a mercury content below the limit imposed by Italian regulations for contaminated soils and sediments (5 ppm). The air and the mercury vapors driven off during roasting were treated before being released to the atmosphere.

Type
Remediation of Mercury
Copyright
© 2004 National Association of Environmental Professionals

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)